APC by Schneider Electric Smart-ups VT - UPS - External - Online - AC 120/208 V + - SUVTP30KF4B4S

APC by Schneider Electric SUVTP30KF4B4S Smart-UPS VT 30kVA Online Double-Conversion UPS

The SUVTP30KF4B4S is APC's Smart-UPS VT 30kVA online double-conversion uninterruptible power supply, engineered for critical IT infrastructure, data center rows, and large enterprise equipment rooms where power quality and runtime predictability are non-negotiable. Unlike line-interactive designs, online double-conversion topology regenerates output power continuously — incoming utility power never reaches your load directly, which means voltage irregularities, frequency instability, and switching transients are isolated before they reach connected equipment.

If you are sizing protection for a high-density server row, a network operations center, or a consolidated UPS strategy replacing multiple smaller units, the UPS and power protection category carries the full range of APC Smart-UPS VT models to compare runtime and bypass options side by side. For large-format deployments, pairing this unit with a compatible APC by Schneider Electric external battery module extends runtime without changing the footprint of the primary cabinet.

Key Features

• Online Double-Conversion Architecture: Output power is continuously synthesized from the inverter — connected servers and storage see clean, regulated power regardless of what the utility is doing. This matters in environments with generator switchover, frequent utility sags, or shared-panel industrial loads nearby.
• 30kVA / High-Capacity Power Plant: Sized to consolidate protection across multiple high-draw devices — rack-dense virtualization hosts, SAN arrays, and network core hardware — under a single managed UPS rather than a bank of smaller units. Fewer management points, simpler bypass maintenance.
• Remote Management Ready: The Smart-UPS VT platform supports network management card integration, enabling remote monitoring of load percentage, battery health, and runtime estimates from a centralized power management console — a practical requirement for any unmanned equipment room or after-hours datacenter.
• Extended Battery Runtime Support: Designed to accept external battery cabinets, allowing runtime to be scaled to match your recovery time objectives without replacing the UPS itself. This is the right architecture when your IT team needs 20+ minutes of runtime for graceful VM migration or sequential shutdown.
• Business Continuity Design: Hot-swappable battery architecture (verify with APC documentation for this specific configuration) and integrated bypass allow maintenance without dropping the load — a genuine operational requirement in 24/7 environments where scheduled downtime is not an option.

Integration and Compatibility

The SUVTP30KF4B4S is designed to integrate with APC's EcoStruxure power management ecosystem and is compatible with standard network management and DCIM platforms via SNMP. For physical installation planning — including floor-load ratings, cable management, and input feed requirements — consult the APC installation guide for this model. Pairing with APC-compatible power distribution units (PDUs) downstream maintains monitoring continuity from the UPS to the individual outlet level.

Frequently Asked Questions

Q: What is the power output of the SUVTP30KF4B4S?

A: This model is rated at 30kVA. For the precise kW real power rating and power factor specification, refer to the APC official datasheet for this SKU.

Q: Does the SUVTP30KF4B4S support remote monitoring?

A: The Smart-UPS VT platform is designed to support APC network management cards for SNMP-based remote monitoring. Verify the specific card slot configuration for this model in APC's documentation before ordering a management card.

Q: Can the SUVTP30KF4B4S runtime be extended?

A: Yes — the Smart-UPS VT product line supports external battery modules. Confirm compatible external battery cabinet models with APC's compatibility guide for this specific configuration.

Q: What input voltage does the SUVTP30KF4B4S require?

A: Based on the product designation, this unit is designed for AC 120/208V input. Confirm exact input voltage range and plug configuration from the APC datasheet before installation planning.

Ted Perry

The SUVTP30KF4B4S sits at the top of APC's Smart-UPS VT commercial line — a 30kVA online double-conversion unit aimed squarely at the kind of critical load environment where a line-interactive UPS simply isn't the right answer. If you're protecting a virtualization cluster, a SAN, or a dense network core, the continuous regeneration architecture of this platform means your equipment never sees raw utility power, period.

Technical Highlights:

• 30kVA Online Platform: Sized for high-draw enterprise environments where consolidating protection under a single large UPS reduces management complexity versus a fleet of smaller rack units.
• AC 120/208V Input Design: Matches standard US commercial facility feeds — relevant for confirming panel capacity and feed conductor sizing before installation.
• Scalable Runtime Architecture: The Smart-UPS VT platform's external battery module support means runtime can be extended to meet recovery objectives without replacing the UPS cabinet — a real advantage when requirements change post-installation.

Deployment Considerations:

• At 30kVA, floor-load capacity and dedicated input feed sizing are the first two conversations to have with your facilities team — confirm before committing to a rack position.
• Specific output receptacle configuration, bypass switch type, and network management card slot availability should be verified against the APC datasheet for this exact SKU before finalizing a bill of materials.

The SUVTP30KF4B4S is the right conversation for a data center row consolidation project, a network operations center build-out, or any facility where the cost of unplanned downtime justifies a full online double-conversion architecture over a simpler standby or line-interactive solution.