Panduit PSL-DCPLRE-BU-C Recessed Blue Patch Cord Lock-In Device

Overview

The Panduit PSL-DCPLRE-BU-C is a recessed-mount patch cord lock-in device engineered to prevent unauthorized access and accidental disconnection at the jack level. Deployed across structured cabling environments where port security is a compliance or operational requirement, each unit physically restrains the patch cord locking tab, making removal impossible without the dedicated removal tool. This pack ships 100 blue devices and five removal tools — enough to secure an entire distribution frame or access-layer switch in a single deployment.

Where standard lock-in devices assume flush-mounted jacks, the PSL-DCPLRE-BU-C targets installations where jacks sit recessed from the panel or faceplate surface. The extended hood is specifically shaped to bridge that depth gap and still engage the locking mechanism reliably — skipping this distinction and ordering a flush-mount variant instead is a common field mistake that results in loose fitment and no actual security.

Key Features

• Recessed-mount geometry: The extended hood compensates for jacks that mount deeper than the panel surface. This matters in high-density patch panels and modular furniture outlets where the jack face can sit 5–10mm behind the faceplate opening — a flush-type lock-in won't reach the locking tab. Ordering PSL-DCPLRE-BU-C (often searched as PSL DCPLRE BU C) for recessed installations eliminates the fitment gap.
• Polycarbonate construction: The locking body is molded from polycarbonate — impact-resistant and dimensionally stable under the repeated insertion and extraction cycles typical in active data centers. It won't crack or deform from incidental cable-pull tension the way lesser materials will.
• Blue color coding: Blue aligns with common patch cord color schemes for data or user-VLAN ports, letting you visually segment locked ports at a glance. In mixed-function environments — where some ports carry critical infrastructure traffic and others don't — consistent color discipline reduces technician error during moves and changes.
• 100-unit pack quantity: A single PSL-DCPLRE-BU-C pack secures a full 96-port patch panel with four spares. Stocking at the carton level (10 packs per carton) scales to full-rack or full-room deployments without per-unit reordering overhead.
• Five removal tools included: Each pack includes five keyed removal tools — enough for a small team working the same room simultaneously. Removal tools are intentionally separate from the device itself, which is the point: a patch cord cannot be removed without one, so unauthorized disconnects require physical possession of the tool.
• Compact footprint: At 0.74 in (18.7 mm) tall and 0.55 in (13.9 mm) wide, the device adds minimal bulk per port — relevant in high-density panels where neighboring connectors are tightly spaced. Check your panel's port pitch before ordering to confirm clearance.
• Tool-enforced access control: The fundamental security property here is operational: without the removal tool, the patch cord stays put. This satisfies physical-layer port security requirements in environments where NIST, PCI-DSS, or internal IT governance policies mandate documented control over active network connections.

Integration & Compatibility

The PSL-DCPLRE-BU-C is designed for use with Panduit patch cords and jack systems where the jack mounts recessed from the panel surface. Verify your jack's mounting depth before selecting between flush and recessed variants — the wrong type will not engage the cord's locking tab correctly. The device does not modify the electrical or signal path in any way; it acts purely as a mechanical restraint on the patch cord connector. Compatible with standard RJ45 patch cords used across Cat5e, Cat6, and Cat6A copper cabling deployments.

What's in the Box

• 100x blue recessed lock-in devices (PSL-DCPLRE-BU-C)
• 5x removal tools

Frequently Asked Questions

Q: What is the difference between the recessed variant (PSL-DCPLRE-BU-C) and a standard flush-mount lock-in device?

A: The recessed version features an extended hood designed for jacks that mount slightly deeper from the panel or faceplate surface. If your jacks sit flush, a standard lock-in device fits; if they're set back from the surface, the recessed geometry of the PSL-DCPLRE-BU-C is required to properly engage the patch cord's locking tab.

Q: How many removal tools are included, and can I purchase extras?

A: Each pack includes five removal tools. For larger deployments or multi-technician environments, Panduit offers removal tools as separate accessories — check the Panduit copper systems line for compatible tool SKUs.

Q: How many devices does one pack contain?

A: Each PSL-DCPLRE-BU-C pack contains 100 blue lock-in devices. Carton quantity is 10 packs (1,000 units per carton) for higher-volume deployments.

Q: What material is the lock-in device made from?

A: The device is molded from polycarbonate, which provides impact resistance and dimensional stability under repeated plug/unplug cycles in active cabling environments.

Q: Will this device work with any RJ45 patch cord?

A: The PSL-DCPLRE-BU-C is engineered for standard RJ45 patch cords across Cat5e, Cat6, and Cat6A copper cabling systems. Verify cord and jack compatibility with Panduit's copper systems documentation for non-standard or slim-boot connector profiles.

Q: Does the device affect signal performance or cable certification?

A: No. The lock-in device is a purely mechanical restraint that acts on the patch cord's locking tab. It does not contact the electrical conductors or alter the signal path in any way, and does not affect channel or permanent-link certification results.