Panduit QPP48HDVNSWH QuickNet 48-Port Modular Patch Panel
Overview
The Panduit QPP48HDVNSWH is a 48-port, 1U modular patch panel from the QuickNet™ family — a straightforward, density-efficient termination point for structured copper cabling in data centers, IDF closets, and security head-end racks. At 19 inches wide and 1.73 inches tall, it fits any standard 19-inch rack or cabinet and delivers 48 ports in a single rack unit, keeping your patch field tight when horizontal space is at a premium. Ports are individually numbered for fast circuit tracing and moves-adds-changes without hunting through an unmarked panel.
Key Features
- 48 Ports in 1U (1.73 in / 43.9 mm): Terminating 48 runs in a single rack unit means a full 48-port network switch can be front-patched from the row directly above or below — no wasted rack space between switching and patching layers.
- Modular (Keystone-Style) Architecture: Ports accept field-terminated QuickNet™ Panduit modular jacks, so you choose the category rating at installation time. Swap a jack to upgrade a port rather than replacing the entire panel — useful in mixed Cat5e/Cat6/Cat6A environments mid-refresh.
- Individually Numbered Ports: Sequential port numbering printed directly on the faceplate reduces circuit-ID errors during patching. In a high-density patch panel environment with dozens of runs, numbered ports cut the time spent tracing a mislabeled connection.
- 19-Inch Standard Width (482.6 mm): Fits any EIA/IEC-standard 19-inch open-frame rack or enclosed cabinet — no adapter brackets required for typical data center or security head-end enclosures.
- White Finish: The white color aids visual contrast in well-lit wiring closets and simplifies color-coded patching schemes where panel color denotes floor, VLAN, or system type.
- QuickNet™ Sub-Brand: QuickNet panels are designed to pair with Panduit's QuickNet modular jacks and QuickNet cable assemblies, keeping the structured cabling system within a single vendor's performance guarantee for channel testing purposes.
Integration & Compatibility
The QPP48HDVNSWH accepts standard Panduit QuickNet modular jack inserts. Port count and 1U form factor pair directly with 48-port PoE switches — relevant for IP camera, access control, and VoIP deployments where every camera or reader home-runs to the IDF. Use with a quality cable management panel above or below to maintain bend radius on patch cords at full port density. Verify jack category rating matches your installed horizontal cable — the panel itself is category-agnostic; the jack insert and cable determine channel performance.
What's in the Box
Package quantity is 1 panel (QPP48HDVNSWH). Carton quantity is 10 units. Modular jacks are sold separately — confirm jack SKUs with your Panduit product configurator before ordering.
Frequently Asked Questions
Q: Does the QPP48HDVNSWH come with modular jacks installed?
A: No. The QPP48HDVNSWH is the panel housing only. Panduit QuickNet modular jack inserts are purchased separately and field-installed into the 48 port openings.
Q: What rack width does the QPP48HDVNSWH require?
A: It requires a standard 19-inch (482.6 mm) rack or cabinet. No adapter hardware is needed for EIA-standard enclosures.
Q: How much rack space does the QPP48HDVNSWH occupy?
A: It occupies 1U — 1.73 inches (43.9 mm) of vertical rack space.
Q: Is the QPP48HDVNSWH category-rated for Cat6A?
A: The panel housing itself is modular and category-agnostic. Channel performance is determined by the specific QuickNet jack inserts installed and the horizontal cable; select jacks rated to your target category (Cat5e, Cat6, or Cat6A).
Q: Can I mix different jack categories in the same QPP48HDVNSWH panel?
A: The modular architecture allows different jack types across ports, though mixing categories on a single panel is generally discouraged in structured cabling best practice — each channel should be tested and documented independently.
The QPP48HDVNSWH earns its place in security and IT head-end racks primarily because the modular jack architecture separates the panel investment from the category decision — at 19 inches wide and 1.73 inches tall, you get 48 numbered termination points in 1U without locking yourself into a pre-loaded jack rating you may need to upgrade in two years.
Technical Highlights:
- 1U / 48-Port Density: 1.73-inch panel height means a fully patched 48-port switch sits immediately adjacent with no wasted rack units between them — important when head-end cabinets are shared between IT and physical security gear.
- Numbered Port Field: Sequential numbering directly on the 482.6 mm faceplate keeps circuit documentation accurate during MACs — in a 200-camera IP security deployment where every run terminates at the IDF, an unmarked panel is a maintenance liability.
- Modular Jack Flexibility: Jacks are field-replaceable without touching the horizontal cable — if a port fails or the category requirement changes, you swap the insert, not the panel. This is the primary operational advantage over fixed-jack panels at similar price points.
Deployment Considerations:
- Order jack inserts at the same time as the panel — the QPP48HDVNSWH ships as housing only (package quantity: 1), and a panel full of empty ports doesn't terminate anything. Confirm jack category against your horizontal cable spec before the order ships.
- At full 48-port density, plan for a 1U or 2U horizontal cable manager above and below the panel — unmanaged patch cords across 48 ports will block airflow and make port identification difficult during troubleshooting.
Best fit: IDF closets and security head-end racks in commercial buildings where horizontal cabling was installed in phases or to mixed category specs, and where the ability to upgrade individual ports without panel replacement matters to the long-term maintenance plan.
