Panduit QASP24WH Angled 24-Port Shielded Modular Patch Panel

Overview

The Panduit QASP24WH is a 1RU, 24-port angled shielded patch panel from the QuickNet™ family, designed to accept shielded QuickNet cassettes in structured cabling deployments where EMI mitigation and clean cable management are non-negotiable. At 19 inches wide and 1.73 inches tall (482.6 mm × 43.9 mm), it fits any standard 19-inch rack and occupies a single rack unit — keeping high-density wiring closets organized without sacrificing port count. If you're building or expanding a shielded copper infrastructure in a manufacturing floor, healthcare facility, or data center where interference is a real concern, this panel belongs on your shortlist of patch panels.

The angled port orientation is the defining practical feature here: patch cords exit at an angle rather than straight out, which substantially reduces congestion in front of the panel and makes it easier to trace and replace individual connections without disturbing adjacent runs. For high-churn environments where moves, adds, and changes are frequent, that geometry pays dividends every time a technician is in the rack.

Key Features

• Shielded Cassette Compatibility: Designed specifically for QuickNet shielded cassettes — the panel's shielded housing maintains ground continuity across the cassette-to-panel interface, which is the failure point in mixed shielded/unshielded builds. If your cabling plant is shielded end-to-end, this panel preserves that investment rather than introducing an unshielded gap at the patch point.
• Angled Port Geometry: Ports are angled forward relative to the panel face, so patch cords exit cleanly and don't pile up in a horizontal mass in front of the faceplate. In a fully patched 24-port panel, that geometry can mean the difference between a readable cable plant and a tangled mess that slows every future change.
• 24 Ports, 1RU (1.73 in / 43.9 mm): Delivers 24 connections in a single rack unit — a standard density that works with most horizontal cable managers and doesn't force you into an awkward rack layout. Carton quantity of 10 units makes procurement straightforward for projects requiring multiple panels across multiple IDFs.
• 19-Inch Rack Width (482.6 mm): Conforms to EIA-310 standard rack width, compatible with open-frame, enclosed, and two-post racks. No adapter hardware required for standard deployments.
• QuickNet™ Modular Architecture: The cassette-based design means you swap cassette modules to reconfigure port types without replacing the panel itself. As your infrastructure evolves — adding PoE++ endpoints, changing connector types, or upgrading to a higher category — the panel stays in the rack and the cassettes change. That modularity matters in long-lifecycle installations where re-cabling the panel would mean re-labeling, re-patching, and downtime.
• White Finish: The white color aids visual differentiation in multi-panel racks where color-coding by floor, zone, or VLAN is part of the cable management scheme. It also improves readability under low lighting conditions common in cramped wiring closets.
• Panduit Copper-Systems Family: Part of Panduit's Panduit structured cabling line, which means accessories, cable managers, and cassettes are designed to the same dimensional and electrical standards — reducing compatibility guesswork when specifying complementary hardware.

Integration and Compatibility

The QASP24WH is built to accept QuickNet shielded cassettes — specify the correct cassette SKU for your connector type (RJ-45, fiber, etc.) and cable category before ordering. The panel itself is passive copper infrastructure; it integrates with any network switch or patch field behind it regardless of vendor. For shielded deployments, verify that your cassettes, patch cords, and field terminations are all rated for the same category and shielding class — a single unshielded link breaks the EMI chain. The 1RU form factor pairs cleanly with standard 1U or 2U horizontal cable management panels mounted directly above or below. For full structured cabling planning across larger deployments, review a network cabling guide to confirm panel quantity, horizontal manager spacing, and cassette selection before rack build-out begins.

Frequently Asked Questions

Q: What cassettes are compatible with the QASP24WH?

A: The QASP24WH accepts QuickNet shielded cassettes from Panduit's QuickNet™ modular system. Specify the cassette SKU based on your required connector type and cable category. Unshielded cassettes should not be used in a shielded plant deployment — they break ground continuity at the panel interface.

Q: How many rack units does the QASP24WH occupy?

A: One rack unit (1RU). The overall height is 1.73 inches (43.9 mm), which fits any standard 19-inch EIA-310-compliant rack or cabinet.

Q: Can the QASP24WH be used with unshielded cabling?

A: The QASP24WH is specifically designed for shielded cassette installations. While the panel will physically accept cassette modules, using it with unshielded components in a shielded plant defeats the purpose of the shielded housing. For unshielded deployments, Panduit offers separate unshielded patch panel options within the QuickNet family.

Q: What is the port count and rack width of the QASP24WH?

A: 24 ports across a 19-inch (482.6 mm) wide panel — standard density for 1RU horizontal cable plant design.

Q: Is the QASP24WH sold individually or in case quantities?

A: The QASP24WH is sold as a single unit (package quantity of 1). It is available in carton quantities of 10, which is useful for multi-IDF or multi-floor projects requiring several panels.

Q: What does the angled port design offer over a straight-port patch panel?

A: The angled orientation reduces patch cord congestion directly in front of the panel face. In fully patched 24-port configurations, angled ports allow cords to exit in a more organized arc, simplifying cable tracing and reducing the risk of accidentally disturbing adjacent connections during MACs.

James Everett

The QASP24WH is the right tool when your structured cabling spec calls for a shielded plant and you need a modular patch panel that doesn't introduce an unshielded gap at the rack — the 19-inch, 1RU shielded housing keeps ground continuity intact across every QuickNet cassette seat. I reach for this panel on industrial and healthcare projects where EMI is a real variable, not a theoretical one.

Technical Highlights:

• 1RU / 24-Port Density: 1.73 inches of rack height for 24 ports means you can land three full panels in a 4U space — useful when horizontal cable managers are already eating rack real estate.
• Angled Port Orientation: The geometry matters in practice. A fully patched straight-face panel creates a cord wall that makes individual trace-and-replace operations error-prone. The angled design keeps individual runs visually separable and physically accessible.
• Cassette-Modular Architecture: The panel frame stays in the rack when the spec changes. On multi-year projects where connector type or category may evolve, that means no full panel swap — just cassette replacements, which is a smaller scope and less downtime.

Deployment Considerations:

• Verify cassette shielding class and category rating matches the rest of your horizontal plant before ordering — the panel enforces nothing about cassette selection at purchase; mismatched cassettes will install physically but compromise shielding performance.
• White finish is the only color offered by this SKU; if your rack layout uses black panels for aesthetic or zone-coding reasons, confirm color before the project BOM is finalized.

For industrial automation or healthcare wiring closets where shielded Cat6A is specified end-to-end and MAC frequency is high enough that cable management ergonomics matter, the QASP24WH and its QuickNet cassette ecosystem is a well-matched, long-lifecycle solution.