Panduit QPP48HDWH 48-Port Flat Patch Panel 1RU White
Overview
The Panduit QPP48HDWH is a 48-port flat patch panel from Panduit's QuickNet™ copper cabling line — a 1RU form factor designed for high-density structured cabling installations where clean port organization and rack efficiency matter. At exactly 19 inches wide and 1.73 inches tall (43.9mm), it fits standard EIA-310 two-post and four-post racks without shimming or adapter rails. The white finish is intended for environments where color-coded infrastructure labeling is part of the cable management strategy.
Key Features
- 48 Ports in 1RU (43.9mm): Packing 48 copper cabling ports into a single rack unit means you use half the vertical space of a two-panel split — critical in fully-loaded 42U or 48U cabinets where every RU counts.
- Flat Panel Design: Unlike angled patch panels that force cable egress to one side, a flat layout gives you flexibility to route patch cords directly forward or to either side — useful in open-frame racks or inline cable management trays.
- Standard 19-Inch Width (482.6mm): Fits any EIA-standard rack without adapters. The 482.6mm chassis aligns flush with universal rack rails — no overhang, no bracket modification required.
- QuickNet™ Sub-Brand: The Panduit QuickNet™ system is built around tool-less or low-tool termination and modular jack compatibility, which can cut termination labor significantly on large horizontal cabling runs.
- White Color: Allows zone or floor differentiation in multi-tenant or campus environments where color-coding by VLAN, floor, or building is part of the cabling standard.
- Sold Individually, Carton of 10 Available: Package quantity of 1 lets you order exactly what you need for a single cabinet; the 10-unit carton quantity supports bulk deployment across a campus IDF refresh without overstocking.
Integration & Compatibility
The QPP48HDWH is a passive copper patch panel — it accepts standard 110-style or Keystone modular jacks depending on the QuickNet variant and mates with any Cat5e, Cat6, or Cat6A horizontal cabling plant. Pair it with a managed PoE switch directly behind it in the same rack section for clean, short patch cord runs. The flat 1RU profile integrates with standard 1U horizontal cable managers above or below each panel row.
What's in the Box
- 1x Panduit QPP48HDWH 48-port flat patch panel (white)
Frequently Asked Questions
Q: What rack width does the QPP48HDWH fit?
A: The QPP48HDWH is 19 inches (482.6mm) wide — standard EIA-310 rack width. It mounts in any two-post or four-post rack with universal 19-inch rails, no adapters needed.
Q: How much rack space does the QPP48HDWH use?
A: It occupies 1RU (1.73 inches / 43.9mm) of vertical rack space, giving you 48 copper ports per rack unit.
Q: Is the QPP48HDWH part of the Panduit QuickNet system?
A: Yes — it carries the QuickNet™ sub-brand, placing it within Panduit's modular, tool-friendly copper cabling ecosystem.
Q: Can I order the QPP48HDWH in bulk?
A: The panel ships in a package quantity of 1 and a carton quantity of 10, so you can order individually or in full carton lots for larger deployments.
Q: What color is the QPP48HDWH?
A: White — suited for environments that use color-coded infrastructure to differentiate zones, floors, or VLANs within a rack room or data center.
The QPP48HDWH earns its place in high-density IDF closets specifically because of the 1RU / 48-port ratio — 43.9mm of vertical space for a full 48-port copper field is as tight as passive copper gets in a standard EIA rack. When I'm spec'ing out a 42U IDF cabinet for a mid-size enterprise floor, that density directly determines whether I need one panel row or two per switch, which cascades into how many 1U cable managers, how much patch cord length, and ultimately whether the cabinet closes clean.
Technical Highlights:
- 1RU / 48-port density (43.9mm): Fits a full switch worth of uplinks in a single rack unit — eliminates the second panel row and saves 1.75 inches of vertical real estate per switch stack.
- 19-inch / 482.6mm chassis: Flush-mount in any EIA-310 rack; no bracket shimming or rail adapters, which matters when you're deploying 10 units across a campus IDF refresh and can't afford fit issues on-site.
- QuickNet™ modular architecture: Tool-less or low-tool jack termination across the 48 ports reduces termination labor per panel — meaningful when you're punching down a full floor's horizontal runs in a single day.
Deployment Considerations:
- Verify jack compatibility before ordering: the QPP48HDWH is a flat panel chassis — confirm the QuickNet jack module type (Cat5e, Cat6, Cat6A) you need matches the horizontal cabling category already pulled in the building.
- White finish is a real planning detail, not cosmetic: if your standard is grey or black panels throughout, mixing in white QPP48HDWH units will stand out — order intentionally if you're using color to denote a specific zone or VLAN group.
This panel is the right call for enterprise IDF buildouts and structured cabling refreshes where rack density is constrained and the cabling team is already working within the Panduit QuickNet ecosystem — particularly floor-level IDFs serving 48-port access switches in standard 19-inch two-post or four-post cabinets.
