Panduit R100X150V1M Turn-Tell Rotating Wire Label Cassette

The Panduit R100X150V1M delivers field-installable wire identification for access-control panels, intercom terminal blocks, and PoE distribution racks where labels must rotate for visibility and install without disconnecting live terminations. This PXE™-series cassette produces 100 white vinyl labels measuring 25.4×38.4mm overall, each with a 25.4×12.7mm printable zone and clear laminated protective cover. The Turn-Tell hinge mechanism lets labels pivot 180° after installation, eliminating the need to predict optimal orientation during rough-in and enabling technicians to reposition labels when equipment layouts change. Compatible exclusively with Panduit MP300 series thermal-transfer printers, this cassette integrates into job-site labeling workflows for projects requiring durable, repositionable wire markers that withstand temperature cycling and incidental contact in crowded enclosures.

Key Features

• Turn-Tell rotating hinge design — labels pivot after installation for optimal viewing angle without re-termination or label replacement
• Install-on-connected-wire capability — slip-fit application over jacketed wire or cable bundle eliminates downtime from disconnecting terminations
• 25.4×12.7mm print zone — accommodates 6-12 alphanumeric characters depending on font size, sufficient for circuit IDs, zone labels, or node addresses
• White vinyl substrate with clear laminated cover — protects printed text from abrasion, solvent exposure, and UV fade in indoor environments
• MP300 printer compatibility — uses Panduit thermal-transfer ribbon technology for permanent, smudge-resistant text that survives wipe-down cleaning
• 100 labels per cassette — reduces consumable swaps during large-scale deployments (access-control risers, intercom home-runs, multi-building PoE backbones)
• RoHS compliant material — meets low-voltage equipment procurement requirements for government, healthcare, and education verticals

The R100X150V1M cassette addresses wire-identification challenges in installations where traditional wrap-around labels fail due to space constraints or repositioning requirements. The Turn-Tell hinge lets integrators apply labels during rough-in — when wire orientation is provisional — then rotate the printed face after equipment mounting and cable dressing finalize the layout. This is critical in access-control panels with stacked terminal blocks where labels must face outward for commissioning techs, or in PoE switch cabinets where horizontal and vertical cable routing coexist. The slip-fit design installs over jacketed cable without requiring installers to disconnect mc-cable whips from power-limited fire-alarm panels or de-terminate shielded pairs from IP intercom controllers, reducing labor and eliminating re-punch errors. The clear laminate cover protects thermal-transfer ink from contact with adjacent conductors, tie-wrap edges, and cleaning solvents used during facility maintenance, ensuring labels remain legible through service life.

This cassette is designed for Panduit MP300 portable printers, which pull label stock and ribbon automatically and cut labels to length after printing. Integrators typically deploy MP300 units on job-site carts with pre-loaded label databases (exported from CAD or access-control programming software), enabling field techs to print circuit-specific labels on-demand rather than managing pre-printed inventory. The 25.4mm label width fits standard 18–22 AWG wire bundles and single Cat6 cables without excessive overhang, while the 12.7mm print height supports 8–10pt fonts readable under panel lighting. The vinyl substrate tolerates temperature swings in non-climate-controlled telecom closets and indoor equipment vaults but is not rated for outdoor or direct-sunlight exposure. Integrators spec this cassette for projects requiring repositionable labels where adhesive-backed tags would leave residue or fail to rotate, and where the Turn-Tell hinge provides long-term flexibility as systems expand or reconfigure.

The R100X150V1M is sold in 5-cassette packs (500 total labels) with case quantities of 80 cassettes (8,000 labels), matching procurement cycles for metro-area access-control rollouts or multi-phase intercom installations. RoHS compliance supports low-voltage specifications in federally funded projects, and the white-on-clear color scheme aligns with industry-standard wire-marking conventions for power-limited circuits. Use this cassette when your specification calls for field-printable, rotate-after-install wire labels that integrate with Panduit's thermal-transfer printer ecosystem and survive the mechanical demands of high-density termination environments.