Panduit SE200PSFR-LR0 Pan-Wrap™ Braided Expandable Sleeving

The Panduit SE200PSFR-LR0 delivers continuous abrasion protection for wire bundles, cable assemblies, and hydraulic lines in transportation and marine installations where heat buildup, moisture retention, and flammability present real risks. This 2" diameter braided sleeving uses flame-retardant polyethylene terephthalate in an open-weave construction that allows airflow and drainage while meeting EN 45545-2 passenger rail standards and UL 1441 VW-1 flammability requirements. The halogen-free formulation eliminates corrosive smoke in fire scenarios—critical for enclosed rail cars, marine engine rooms, and EV battery compartments. Black with white tracer for easy identification in complex harnesses. 50-foot reel.

Key Features

• 2.00" (50.8mm) expanded diameter accommodates large wire bundles, multi-conductor cables, and clustered hydraulic hoses without compression
• Open-weave PET braid prevents heat and humidity trapping—eliminates the insulation effect that causes premature cable degradation in sealed conduit runs
• EN 45545-2 rated for European passenger rail applications; UL 1441 VW-1 flammability rating for North American installations
• Halogen-free construction produces non-corrosive smoke during fire events, protecting sensitive electronics and reducing toxicity in occupied spaces
• Self-extinguishing flame-retardant PET resists ignition from arc faults, welding sparks, and engine exhaust contact
• Black with white tracer thread provides visual confirmation of coverage and simplifies harness inspection during service intervals
• Expands to 150% of nominal diameter for easy installation over connectors and inline splices without disassembly
• Lightweight flexible construction conforms to complex cable routing around tight corners, through bulkhead penetrations, and across articulated joints
• 50-foot continuous length eliminates mid-run splices on long cable trays and reduces labor vs. cut-to-length alternatives

Pan-Wrap sleeving addresses three failure modes common in mobile and marine electrical systems: abrasion from vibration and cable movement, moisture accumulation inside sealed jackets, and accelerated insulation breakdown from trapped heat. The braided structure creates a sacrificial barrier that absorbs mechanical wear while maintaining cable flexibility—critical in articulated booms, sliding doors, and robotic arms where cables undergo millions of flex cycles. The open weave allows water drainage and air circulation, preventing the condensation and corrosion that occurs when moisture becomes trapped between cable jacket and outer protective layer. For high-current DC runs in EV charging systems and battery management wiring, the ventilation prevents the compounding effect where ohmic heating combines with trapped ambient heat to push conductors past rated temperature limits. The 2" diameter handles 750 MCM feeder cables, bundled Cat6A runs in railway data networks, and multi-hose hydraulic assemblies in excavators and marine steering systems. Installation requires no special tooling for straight runs—simply compress the braid longitudinally to reduce diameter, slide over the cable assembly, and release to grip. For runs with pre-installed connectors, use Panduit's SE200-AT installation tool (not included) to fan the weave open and guide the sleeving over terminations without snagging or fraying.

Integrators spec this sleeving for rail HVAC and traction motor cables where EN 45545-2 HL2/HL3 compliance is mandatory for passenger vehicles operating in the EU. The halogen-free formulation meets the standard's smoke density and toxicity limits while the flame-retardant treatment satisfies ignitability requirements—eliminating the need for metal conduit in underfloor cable trays and reducing installed weight by 60-70% vs. rigid protection. In maritime applications, use it to protect VFD output cables on deck winches and thruster motor leads in engine rooms where saltwater spray, diesel mist, and 140°F ambient temperatures cause rapid jacket degradation. The PET braid resists UV exposure and doesn't wick moisture like nylon-based sleevings, making it suitable for outdoor camera runs on port gantry cranes and above-deck antenna feeders on commercial vessels. For datacenter hot-aisle containment, the sleeving protects power whips and fiber trunk cables routed through ceiling plenums without creating fire-load violations—the UL VW-1 rating satisfies most AHJ plenum restrictions when used with plenum-rated cables. The white tracer simplifies post-installation inspection and photographic documentation for commissioning reports. At 50 feet per reel with 2-reel carton quantity, a single carton covers a typical railway passenger car end-to-end or protects all exposed cables in a mid-size switchgear lineup.

This sleeving fits installations where cables face mechanical abuse, thermal stress, and regulatory scrutiny simultaneously—passenger rail traction power, maritime propulsion systems, outdoor substation jumper cables, and industrial robot harnesses. The combination of EN 45545-2 certification, halogen-free construction, and open-weave ventilation solves the compliance-versus-durability conflict that forces installers to choose between meeting fire codes and achieving acceptable service life in harsh environments.