i-PRO
SKU: WV-X4573L
Overview
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Overview
Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.
The WVCW334S is a compact outdoor vandal-resistant fixed dome built for commercial installations where impact resistance and weather durability are non-negotiable. Deploy this in parking structures, building perimeters, and high-traffic exterior corridors where standard housings fail under deliberate tampering or environmental stress. The dome form factor minimizes visual footprint while the vandal-resistant enclosure absorbs impacts that would crack conventional domes — critical when your installation sits within reach of facility traffic or adversarial contact. This camera integrates directly into i-PRO surveillance deployments and ONVIF-compliant VMS platforms.
The WVCW334S works with i-PRO surveillance systems and any ONVIF Profile S/T/G compliant VMS — Milestone, Genetec, and vendor-neutral platforms that support ONVIF device discovery. Before deployment, confirm your NVR or VMS can handle this camera's streaming profile and bitrate across your network. Multi-camera sites require validation of switch capacity and PoE power delivery stability. Cable runs longer than 300 feet demand voltage verification at the camera location before final commissioning — voltage drop over extended runs can degrade power delivery and trigger thermal shutdown.
Mount on ceiling or wall using supplied corrosion-resistant hardware only — verify mounting surface load capacity before attachment. Weather-seal all cable entries with supplied weatherproof connectors or rated equivalents appropriate to your climate zone. Pre-commissioning test is mandatory: measure PoE voltage at the camera with a multimeter, especially on runs exceeding 300 feet. After physical mounting and 30 minutes of thermal stabilization, perform lens focus calibration in the final environment to lock sharpness and prevent focus drift under temperature change.
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more i-PRO products? Shop the full i-PRO catalog →
Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.
Fixed scope • Fixed price