ACTi PMAX-0200 Outdoor Housing for Box Camera
Overview
The PMAX-0200 is an IP66-rated outdoor enclosure designed to protect ACTi box-style IP cameras from rain, dust, temperature extremes, and UV exposure. IP66 means the housing resists direct water jets and complete dust ingress — deploy it in loading docks, coastal installations, industrial yards, or any outdoor site where moisture and contaminants are constant factors. This is the correct choice when you need to mount a box camera outdoors without building a custom shelter or accepting degraded reliability from unprotected electronics.
Compatibility
The PMAX-0200 accommodates ACTi box cameras. Verify your specific camera model's mechanical dimensions against the housing footprint before ordering — box camera mounting varies by sensor width and lens depth. If you are deploying an ACTi box-series camera (check your equipment documentation for the box form factor), this housing will provide the environmental seal layer you need.
Installation Notes
Mount the housing to a wall, pole, or structural member using standard fasteners appropriate to your substrate (concrete anchors, lag bolts, or welded brackets per your site requirements). Position the camera inside the enclosure and secure it to the internal mounting plate. Route cables through the weatherproof gland openings and seal unused entries with caps to maintain IP66 integrity. Verify that cable entry seals remain intact after installation — any compromise of the gasket will degrade weather resistance. Allow clearance around the housing for air circulation if the camera dissipates significant heat during extended operation.
What's in the Box
- PMAX-0200 outdoor housing enclosure
- Internal mounting plate
- Weatherproof cable glands
