Panduit F92RPU2U2ONM006 6m OS2 LC Uniboot Fiber Cord

Panduit F92RPU2U2ONM006 Opti-Core 6-Meter OS2 Single-Mode Fiber Patch Cord with LC Duplex Uniboot APC Connectors

The Panduit F92RPU2U2ONM006 delivers single-mode OS2 fiber connectivity in a space-saving uniboot form factor, purpose-built for high-density data center and telecom room installations. This 6-meter (19.68 ft) patch cord features LC duplex uniboot APC connectors on both ends, providing angled physical contact for minimal return loss in 10G, 40G, and 100G networks. The yellow OFNP plenum-rated jacket meets fire code requirements for air-handling spaces, while the 9/125 μm fiber core supports distances up to 10 km at 10 Gbps. Part of Panduit's Opti-Core system, this patch cord delivers optimized insertion loss performance and simplifies polarity management in structured fiber deployments.

Key Features

• LC duplex uniboot APC connectors on both ends for space-efficient, high-performance single-mode connections
• OS2 9/125 μm single-mode fiber supports 10 Gbps to 10 km, 40 Gbps to 2 km, and 100 Gbps to 500 m
• 6-meter (19.68 ft) length ideal for rack-to-rack cross-connects and equipment distribution area patching
• Uniboot pull-boot design reduces cable management footprint by 50% vs. dual-boot LC patch cords
• APC (angled physical contact) polish delivers ≤ -60 dB return loss, critical for coherent optics and DWDM
• Plenum (OFNP) rated jacket complies with NEC 770.179(A) for installation above suspended ceilings
• Optimized insertion loss manufacturing ensures consistent performance across all patch cord components
• Yellow jacket color for instant OS2 single-mode identification per TIA-598-D fiber color coding
• Complies with ISO/IEC 11801, TIA-568-C.3, and TIA-604 (FOCIS) fiber connector interface standards
• RoHS compliant components for environmentally responsible installations

The F92RPU2U2ONM006 employs APC (angled physical contact) connectors with an 8-degree end-face angle, a critical feature for networks running coherent optics, DWDM (dense wavelength division multiplexing), or any application sensitive to back reflection. Standard PC (physical contact) connectors return approximately 4-8% of transmitted light back toward the source; APC's angled interface redirects reflected light into the cladding, achieving return loss values below -60 dB—a 100-fold reduction in reflected power. This matters in 40GBASE-LR4, 100GBASE-LR4, and all single-mode 10G optics, where even small amounts of reflected light degrade bit error rate and reduce effective link budget. The OS2 fiber itself is manufactured to ITU-T G.652.D specifications with a 9 μm core diameter and 125 μm cladding, supporting modal bandwidth beyond 10 GHz·km and chromatic dispersion below 18 ps/(nm·km) at 1550 nm. Panduit's Opti-Core manufacturing process pre-polishes connector end-faces to geometry tolerances tighter than TIA-604-3 and TIA-604-10 requirements, then validates each patch cord for insertion loss (typically ≤ 0.3 dB) and return loss before packaging. The uniboot housing consolidates both fibers into a single compact connector body approximately 60% smaller than two discrete simplex LC connectors, enabling 50% higher port density in fiber panels and reducing the strain on cable managers in congested pathways.

This 6-meter length bridges the gap between short 1-2 meter patch cords used for equipment-to-patch-panel connections and longer 10-15 meter cords deployed for cross-aisle or inter-rack links in data centers. In a typical structured fiber deployment, the F92RPU2U2ONM006 connects pre-terminated MTP/MPO cassettes in the main distribution area (MDA) to active equipment in the equipment distribution area (EDA), or links core switches to aggregation switches across adjacent racks. The uniboot pull-boot feature is particularly valuable in these scenarios: installers can convert polarity in the field by simply sliding the pull-boot forward, rotating the connector body 180 degrees, and re-seating it—a 15-second operation that eliminates the need for Method B or Method C polarity crossover cables. Yellow jacket color provides instant visual confirmation of OS2 single-mode fiber, preventing accidental mating with OM3/OM4 multimode systems (which use aqua jackets) and ensuring fiber type consistency during maintenance and troubleshooting. The plenum rating is non-negotiable for installations above drop ceilings, in HVAC plenums, or in any space where return air circulates without metal conduit; the OFNP jacket formulation has been tested to NFPA 262 (UL 910) flame propagation limits and produces minimal smoke under fire conditions. Panduit's RoHS-compliant construction also satisfies federal procurement requirements under FAR 52.223-5 and supports LEED v4.1 Materials & Resources credits for projects targeting green building certification.

The F92RPU2U2ONM006 ships as part of Panduit's Opti-Core pre-terminated fiber system, designed to integrate seamlessly with Opti-Core cassettes, panels, and enclosures—ensuring consistent insertion loss budgets across the entire channel. Its compliance with ISO/IEC 11801 Edition 2.2 and TIA-568-C.3 makes it a safe specification for projects requiring standards-based bid responses, while the TIA-604-3 and TIA-604-10 (FOCIS-3, FOCIS-10) connector certifications guarantee interoperability with any vendor's LC-compatible transceivers. For integrators managing 10GBASE-LR, 40GBASE-LR4, or 100GBASE-LR4 deployments, this patch cord delivers the combination of APC polish, uniboot density, and plenum compliance that modern data center and campus backbone installations demand—backed by Panduit's quality manufacturing and global supply chain.