Panduit F92RLU1U1ONM030 30m OS2 LC Uniboot Fiber Cable

Panduit F92RLU1U1ONM030 30m OS2 LC Duplex Uniboot Fiber Patch Cable

The Panduit F92RLU1U1ONM030 Opti-Core™ patch cable delivers OS2 single-mode fiber connectivity with LC duplex Uniboot connectors on both ends, spanning 30 meters in a low-smoke zero-halogen jacket. Built for datacenter, telecom, and enterprise backbone installs where polarity management, high-density patching, and long-haul 9/125µm performance are non-negotiable, this cable eliminates the need for on-site polarity adapters or re-termination through its integrated pull-tab reversal mechanism. LSZH construction meets international fire-safety standards for indoor and plenum-equivalent applications, while factory-optimized insertion loss ensures reliable 10G, 40G, and 100G transmission across the full 30-meter span.

Key Features

• OS2 single-mode fiber (9/125µm) supporting 10GBASE-LR, 40GBASE-LR4, 100GBASE-LR4, and wavelengths up to 1550nm
• LC duplex Uniboot pull-tab connectors on both ends—polarity reversal without re-termination or adapters
• 30-meter (98.4 ft) length for equipment-to-patch-panel, cross-aisle, and inter-rack runs in larger facilities
• LSZH (Low Smoke Zero Halogen) 2.0mm jacket—compliant with IEC 60332-1 and safe for occupied spaces
• Optimized insertion loss—factory tested to TIA-604-10 (FOCIS-10) standards for <0.3dB typical loss per connector
• Yellow jacket for instant single-mode identification in mixed-fiber environments
• RoHS compliant and meets TIA/EIA-568-C.3, ISO/IEC 11801, TIA-604-3 (FOCIS-3) standards
• Opti-Core™ sub-brand—Panduit's performance tier for mission-critical fiber infrastructure

Uniboot LC connectors consolidate two fibers into a single, narrow boot, cutting patch-panel congestion by half compared to traditional duplex LC designs. The integrated pull-tab mechanism lets you reverse polarity in the field—critical when you discover A-B vs. B-A mismatches during cross-connect work or when adapting trunk polarity to transceiver requirements. No need to stock reversed cables or carry polarity-flip adapters; simply pull the tab, rotate the connector 180°, and snap it back. This 30-meter length bridges equipment racks to patch panels in mid-to-large server rooms, or spans cross-aisle runs in datacenter hot-aisle/cold-aisle layouts where fiber must traverse overhead cable trays or under-floor pathways. OS2 fiber supports link distances up to 10km at 10Gbps (10GBASE-LR) and 40km+ for some 100G optics, making this cable over-provisioned for intra-facility runs and future-proof for wavelength upgrades. Factory-optimized insertion loss means each connector is polished, inspected, and tested to deliver <0.3dB loss typical—eliminating the variability and risk of field terminations and ensuring your link budget stays intact even when daisy-chaining multiple patch points.

Deploy this cable in datacenter main distribution areas (MDAs) to interconnect core switches with MPO-to-LC breakout cassettes, in horizontal distribution areas (HDAs) to patch ToR switches to storage arrays or server NICs, or in telecom equipment rooms where OS2 single-mode links connect OLTs, WDM mux/demux units, and carrier demarcation points. The 30-meter length fits the footprint of larger colocation cages, campus network closets with distant equipment racks, and AV installations where fiber runs from control rooms to remote display walls or video endpoints. LSZH jacketing is required by international building codes (IEC, EN) and increasingly specified in U.S. projects where smoke toxicity matters—hospitals, schools, transportation hubs, and high-occupancy commercial spaces. Unlike PVC-jacketed cables that release hydrochloric acid and dense smoke when burning, LSZH compounds emit minimal particulates and no corrosive halogens, protecting both occupants during evacuation and sensitive electronics in adjacent spaces. The 2.0mm jacket diameter balances durability with flexibility, allowing tight-radius bends around cable managers and through congested trays without kinking or stressing the fiber.

Manufactured to TIA-604-3 and TIA-604-10 FOCIS standards for connector endface geometry, tested per ISO/IEC 11801 and TIA/EIA-568-C.3 for transmission performance, and certified RoHS compliant under EU Directive 2002/95/EC. Panduit Opti-Core™ patch cables ship with individual dust caps, and each carton includes compliance documentation for project closeout submittals. When your install demands predictable insertion loss, field-reversible polarity, and fire-rated jacketing that won't fail inspection, this LC Uniboot OS2 cable is the build-to-spec choice for integrators who document every dB and every code reference.