Panduit FRZTP88X001M010 OM4 12-Fiber PanMPO Trunk Cable
The Panduit FRZTP88X001M010 is a factory-terminated 12-fiber OM4 multimode trunk cable engineered for high-speed parallel optics in data centers and telecommunications environments. Featuring PanMPO female connectors on both ends with Method A polarity, this 10-meter plenum-rated interconnect eliminates field termination labor while delivering the bandwidth density required for 40GBASE-SR4 and 100GBASE-SR4 deployments. Pre-tested and certified to TIA-568.3-D and ISO/IEC 11801 standards, it ships ready to deploy between switches, patch panels, or MTP/MPO cassettes in mission-critical network infrastructure.
Key Features
- Factory-Terminated PanMPO Connectors: Both ends feature Panduit's precision PanMPO female connectors with integrated dust caps—no field polishing, no epoxy, no guesswork.
- OM4 50/125µm Fiber: Supports 40 Gbps to 400 meters and 100 Gbps to 150 meters over multimode fiber, future-proofing your backbone for next-generation switching.
- Method A Polarity: Straight-through key-up to key-down orientation aligns with industry-standard parallel optics architectures, ensuring correct transmit/receive pairing across all 12 fibers.
- Plenum-Rated OFNP Jacket: Low-smoke, flame-retardant construction meets NEC Article 770 requirements for installation in air-handling spaces without conduit.
- 12-Fiber Trunk Design: Consolidates a dozen fibers into a single compact cable assembly, reducing pathway congestion and simplifying moves, adds, and changes.
- 10-Meter Optimized Length: Purpose-built for in-row, top-of-rack, or end-of-row connections in structured cabling systems—long enough for flexibility, short enough to minimize insertion loss.
- Opti-Core® Engineering: Panduit's structured cabling brand delivers consistent performance, rigorous factory testing, and full traceability for every trunk assembly.
- Plug-and-Play Deployment: Ships pre-tested with insertion loss and return loss certification—mount your patch panels, click in the trunks, and light up your 40G/100G uplinks in minutes.
High-density data centers and telecom rooms running 40G or 100G Ethernet demand cabling infrastructure that balances speed, density, and reliability. The FRZTP88X001M010 addresses all three. Traditional LC duplex fiber requires six physical connections per 40GBASE-SR4 link; this single 12-fiber trunk consolidates that into one insertion per end, cutting installation time and reducing points of failure. The OM4 laser-optimized fiber supports 40 Gbps Ethernet to 400 meters and 100 Gbps to 150 meters—well beyond typical data center row depths—so your cabling won't become the bottleneck as switching speeds climb. Method A polarity is the de facto standard for parallel optics: fiber 1 on end A maps to fiber 12 on end B, fiber 2 to 11, and so on, ensuring proper transmit-to-receive alignment when mated with compliant transceivers or breakout modules. Panduit's PanMPO connector incorporates a push-pull latch design that prevents snagging in high-density patch fields and maintains physical contact across all 12 ferrule positions under mechanical stress.
Plenum rating isn't optional in most commercial installations—it's code. The OFNP jacket on this assembly meets NFPA 262 flame propagation and smoke density limits, allowing you to run it through ceiling return plenums, raised floors, and HVAC pathways without expensive conduit or sprinkler modifications. This is critical in retrofit projects where existing pathways can't accommodate additional raceway and in new builds where every inch of plenum space counts. The 10-meter length is purpose-selected for mid-range connections: longer than the 3-5 meter jumpers used for adjacent racks, shorter than the 30+ meter campus backbones, and optimized for the 20-40 foot cable runs typical of row-based or pod-based data center architectures. Factory termination means every fiber is cleaved, polished, and inspected under magnification before it ships; you're not gambling on field techs having a good day with an epoxy kit. Each trunk includes test results showing insertion loss under 0.35 dB typical, well within the 1.5 dB channel budget for 100GBASE-SR4, leaving margin for patch cord connections and aging.
This cable integrates seamlessly into Panduit's Opti-Core structured cabling ecosystem, mating with Opti-Core FAP fiber adapter panels, FMT MTP/MPO cassettes, and FZ2 enclosures for a complete end-to-end solution. It's equally compatible with third-party MPO infrastructure—the connector pinout and physical dimensions conform to IEC 61754-7, so it'll click into any standards-compliant MTP or MPO adapter. Compliance extends beyond physical specs: TIA-568.3-D certification ensures interoperability with enterprise twisted-pair and fiber standards, ISO/IEC 11801 covers international cabling requirements, and ANSI/TIA-942-B aligns the assembly with data center telecommunications infrastructure best practices. For integrators managing multi-vendor environments, that standards stack translates to fewer compatibility surprises and smoother handoffs between cabling, switching, and optical transport layers.
Whether you're building out a new hyperscale facility, upgrading a legacy 10G backbone to 40G/100G, or deploying high-performance computing clusters that demand low-latency east-west traffic, pre-terminated OM4 trunks like the FRZTP88X001M010 deliver the speed-to-deployment and performance consistency that field-terminated solutions can't match. Panduit backs this assembly with comprehensive documentation, factory test records, and the quality control that comes from terminating thousands of connectors per day in a controlled environment—not on a scissor lift in a cold data hall.
