Middle Atlantic NM TEE Fitting PN10 Ivory - PN10F15V

Middle Atlantic PN10F15V NM Tee Fitting for PN10 Series Raceway

Overview

The Middle Atlantic PN10F15V is a single-channel non-metallic tee fitting designed specifically for the PN10 Series raceway system. When you're routing structured cabling through an office, security installation, or AV infrastructure and need to branch a run in three directions without improvised solutions, this fitting handles the geometry cleanly. At 3-3/4 in wide, 3/4 in high, and 5-1/4 in long, it maintains the profile of the PN10 raceway and keeps the installation looking intentional rather than patched together.

The ivory finish is matched to the PN10 Series — relevant whenever cable management is surface-mounted in finished interior spaces like conference rooms, lobbies, or corridor walls where exposed hardware needs to blend with the environment rather than draw attention.

Key Features

• PN10 Series System Fit: Designed as a native PN10 component, the PN10F15V integrates flush with the raceway channel so transitions don't create gaps, misalignments, or stress points on the cable jacket. Drop-in third-party fittings rarely achieve this — the dimensional match matters on finished wall runs.
• Single-Channel Tee Configuration: Routes one cable path into two outgoing directions at a 90-degree branch. For access control wiring, IP camera drops, or low-voltage signal runs that need to split at a junction point, this eliminates the need to cut and re-terminate in a separate junction box.
• Plastic Construction: Non-metallic material keeps the fitting lightweight and avoids any grounding or conductivity concern near low-voltage signal cabling. Weight isn't a factor when mounting to drywall or hollow-core partitions.
• Compact Footprint — 3-3/4 in W x 3/4 in H x 5-1/4 in L: The tee footprint is sized to stay within the PN10 raceway width, meaning it doesn't protrude beyond the channel profile on the wall surface. Clean sightlines matter in customer-facing spaces.
• Ivory Color Match: Ivory is the standard PN10 Series color for interior commercial applications. Mixing raceway body and fittings from the same color family avoids the patchwork look that happens when components are sourced inconsistently.
• Surface-Mount Cable Management System: The PN10 Series is a surface-mount raceway, not a conduit-in-wall system — meaning installations don't require wall penetrations or conduit work. Fittings like the PN10F15V complete the system's ability to navigate corners, branches, and end caps without additional fabrication.

Integration and Compatibility

The PN10F15V is a system-specific fitting — it is designed exclusively for the Middle Atlantic PN10 Series raceway and is not a universal fitting. Verify your existing raceway channel is PN10 Series before ordering; the PN10 designation indicates channel width and mounting geometry that must match the installed base.

This fitting is appropriate for surface-mount cable management in interior environments. It is not rated for outdoor, wet, or high-humidity locations — standard plastic construction without an environmental seal. For security installations, it's well-suited to indoor camera cable drops, access control reader wiring, and intercom cabling in finished interior spaces.

Pair with the full PN10 Series accessory set — straight couplers, inside corners, outside corners, and end caps — to complete a routed run without gaps. When planning a structured cabling layout, map tee locations before cutting raceway lengths; tee fittings require adequate straight-run length on all three legs to seat properly.

For installations where cable runs terminate at IP cameras or access control hardware, consider routing to a PoE switch or panel using the PN10 raceway system to keep the full pathway protected and aesthetically consistent from endpoint to IDF closet.

Frequently Asked Questions

Q: Is the PN10F15V compatible with other Middle Atlantic raceway series, such as PN5 or PN7?

A: No. The PN10F15V is designed specifically for the PN10 Series raceway. Different series have different channel widths and mounting geometries, so fittings are not interchangeable across series designations.

Q: What is the channel count on the PN10F15V?

A: The PN10F15V is a single-channel fitting, routing one cable pathway into a tee branch configuration.

Q: Can the PN10F15V be used in outdoor or wet locations?

A: No. The PN10F15V is a plastic, non-sealed fitting intended for interior use only. It carries no outdoor or environmental rating and should not be installed in wet, damp, or high-humidity conditions.

Q: What are the exact dimensions of the PN10F15V?

A: The PN10F15V measures 3-3/4 in wide, 3/4 in high, and 5-1/4 in long.

Q: What color is the PN10F15V?

A: Ivory — matched to the standard PN10 Series raceway color for interior commercial installations.

Q: What type of cabling is the PN10F15V suitable for?

A: The PN10 Series raceway and its fittings are designed for low-voltage signal cabling — including Cat5e/Cat6 Ethernet, coaxial, and access control wiring — in surface-mount interior applications.

Marty Allison

The PN10F15V is the piece most installers forget to order until they're standing on a ladder mid-run. It's a single-channel tee fitting for the PN10 Series raceway — 5-1/4 in long, 3-3/4 in wide — and its only job is to let you branch a cable run cleanly in three directions without cutting into drywall or improvising with a junction box. I've seen too many otherwise clean installations ruined by a mismatched fitting at the branch point; the ivory color and PN10-specific geometry of the PN10F15V keep the wall surface consistent end-to-end.

Technical Highlights:

• PN10 Series-specific fit: The 3-3/4 in width matches the PN10 channel exactly — no overhang, no gap at the seam where the fitting meets the raceway body. Generic tees in this size range typically leave visible edges that catch dust and look unfinished in client-facing spaces.
• Single-channel plastic construction: Non-metallic body means no grounding concerns adjacent to Cat6 or coaxial runs — relevant in access control or camera installations where signal integrity matters and you don't want accidental contact with a conductive surface.
• 5-1/4 in body length: Long enough to provide adequate straight-run on all three legs before the branch, which prevents the cable from bending sharply at the exit point and stressing the jacket over time.

Deployment Considerations:

• Order tee fittings at the planning stage, not mid-install — the PN10F15V is system-specific and won't substitute across other Middle Atlantic raceway series. Measure branch locations on your layout drawing before cutting any raceway lengths.
• Interior-only: the plastic construction carries no environmental seal rating, so don't use this in mechanical rooms, exterior soffits, or anywhere with moisture exposure. For those locations, a different raceway system with rated fittings is required.

The PN10F15V is the right specification for low-voltage cable management in finished commercial interiors — think lobby card reader drops, IP camera cable runs down a corridor wall, or intercom wiring in a multi-tenant office where the cable pathway needs to be visible but unobtrusive. It's a detail component, but getting the fitting right is what separates a professional installation from a field-expedient one.