Middle Atlantic NM Fiber Radius Outside E - PN05F19V

Middle Atlantic PN05F19V NM Fiber Radius Outside Elbow Raceway

Overview

The Middle Atlantic PN05F19V is an external elbow fitting for the PN05 single-channel fiber raceway series, designed to route cable around outside corners without exceeding minimum bend-radius limits. At 1-1/4 in wide, 1/2 in tall, and 3-1/4 in long, the PN05F19V keeps fiber runs protected and visually clean through 90-degree outside turns — the kind of transition you hit when raceway exits a wall column or turns a corner along a baseboard. Ivory finish matches standard ivory raceway sections for a consistent, finished appearance in commercial interior deployments.

Compatibility

Fits the Middle Atlantic PN05 series single-channel fiber raceway system. The PN05 line is a 1-1/4 in wide, 1/2 in high raceway family commonly used in structured cabling and low-voltage fiber runs across commercial spaces. The PN05F19V outside elbow mates with PN05 straight sections, inside elbows, tees, and end caps within the same series — all sharing the same channel cross-section and ivory color. Do not mix with wider or taller raceway families; cross-series fittings will not seat correctly.

Installation Notes

This fitting is a snap- or slide-fit mechanical elbow; no tools required for assembly into PN05 straight sections. Route fiber through the elbow before closing the cover — fiber cannot be fished through after the elbow is secured in place. Maintain fiber manufacturer minimum bend-radius specifications when dressing cable through the turn; the radius geometry of this outside elbow is sized for the PN05 channel width but does not substitute for verifying bend radius against your specific fiber type. Mount the elbow to the wall using the same fastener pattern as the adjoining straight sections.