Middle Atlantic NM Cover Clip 2800 White - 2806-WH

Middle Atlantic 2806-WH 2800 Series PVC Cover Clip — White

Overview

The Middle Atlantic 2806-WH is a replacement and supplemental cover clip designed specifically for the 2800 Series non-metallic uniduct raceway system. If you are running cable management in a rack room, AV closet, or structured cabling installation built around the 2800 Series, this single white PVC clip is the component that keeps duct covers seated and the overall run looking finished. It is a straightforward fit-to-system part — no guesswork on compatibility if you are already on the 2800 Series platform.

The 2806-WH (often searched as 2806 WH) ships as a single unit, which matters when you need to replace a damaged clip or add coverage to an extended run without purchasing a full kit. TAA compliance means it qualifies for U.S. government and federal procurement programs without triggering country-of-origin issues.

Key Features

• 2800 Series Compatibility: Engineered to fit the Middle Atlantic 2800 Series uniduct raceway system — no trial-and-error fitting. If your installation is built on the 2800 Series, the 2806-WH drops straight into the existing infrastructure without modification.
• PVC Construction: Polyvinyl chloride is the standard material for non-metallic cable duct components — lightweight, corrosion-resistant, and electrically non-conductive. In environments where metallic components would create grounding concerns or add unnecessary weight to a surface-mounted run, PVC is the correct call.
• Maximum Cable Diameter Support — 3.2 cm: The clip accommodates cables or cable bundles up to 3.2 cm in diameter. For most structured cabling runs involving Cat6, coax, or low-voltage security cabling, this is adequate clearance. Measure your thickest bundle before ordering if you are running large conduit or multi-conductor cable in the same duct.
• White Finish: The white colorway matches standard commercial interior installations — ceiling tile grids, white-painted walls, and drop-ceiling environments. Blends into the background rather than drawing attention to the cable management infrastructure, which is typically the goal in customer-facing or executive spaces.
• TAA Compliant: Verified TAA (Trade Agreements Act) compliant, making the 2806-WH eligible for GSA schedule purchases, federal government contracts, and projects with domestic-sourcing requirements. If your procurement office requires TAA compliance documentation, this part clears that gate.
• Single-Pack Quantity: Sold as one clip per unit. This is practical for repair, replacement, or topping off an existing installation without being forced into bulk packaging. Order the exact quantity your project requires.

Integration & Compatibility

The 2806-WH is purpose-built for the Middle Atlantic 2800 Series non-metallic uniduct system. It is not a universal-fit clip intended to span multiple raceway brands or series — if your cable duct is from a different series or manufacturer, verify the clip profile before ordering. For integrators building out cable management runs in security, AV, or network infrastructure environments, pairing this clip with the correct 2800 Series base and cover components ensures a consistent, professional finish on the cable run. If you are speccing a broader raceway and rack accessories installation, review the full 2800 Series accessory lineup to confirm you are sourcing the correct fittings for your duct configuration. For projects requiring compliant low-voltage infrastructure, TAA-verified components like the 2806-WH help satisfy government and federal procurement requirements at the component level.

Frequently Asked Questions

Q: Is the Middle Atlantic 2806-WH TAA compliant?

A: Yes. The 2806-WH is verified TAA (Trade Agreements Act) compliant, making it eligible for GSA schedule and federal government procurement programs with domestic-sourcing requirements.

Q: Which raceway series is the 2806-WH compatible with?

A: The 2806-WH is designed specifically for the Middle Atlantic 2800 Series non-metallic uniduct cable duct system. It is not confirmed compatible with other raceway series or third-party duct brands.

Q: What is the maximum cable diameter the 2806-WH supports?

A: The clip supports a maximum cable diameter of 3.2 cm. Verify your cable bundle diameter against this spec before ordering, particularly for larger multi-conductor runs.

Q: How many clips come in a pack?

A: The 2806-WH is sold as a single clip (1 pc per pack). Order the quantity you need for your specific repair or installation requirement.

Q: What material is the 2806-WH made from?

A: It is constructed from polyvinyl chloride (PVC), a standard non-metallic material for cable duct fittings — lightweight, corrosion-resistant, and electrically non-conductive.

Q: Can the 2806-WH be used in government or federal facilities?

A: Yes. TAA compliance means it satisfies the country-of-origin requirements for most federal and government facility projects subject to the Trade Agreements Act.

Ted Perry

The 2806-WH is a single PVC cover clip for the Middle Atlantic 2800 Series uniduct — a small part that matters when a run looks incomplete or a clip has been damaged during a retrofit. With a 3.2 cm maximum cable diameter clearance, it handles the vast majority of low-voltage security and structured cabling bundles without issue, and the white finish integrates cleanly into standard commercial interior environments where exposed cable management is a visible element of the installation.

Technical Highlights:

• PVC Material: Non-metallic construction eliminates grounding and corrosion concerns in mixed-environment installations — appropriate for surface-mounted runs near HVAC equipment or in humid mechanical spaces where metal duct fittings can corrode over time.
• 3.2 cm Max Cable Diameter: Covers the typical range of Cat6, RG59/RG6 coax, and bundled low-voltage runs. If you are running anything thicker — large multi-pair or armored cable — measure first; this clip has a hard ceiling at 3.2 cm.
• TAA Compliance: For federal contractors and integrators working on GSA-schedule or government-funded projects, TAA compliance at the component level is a procurement requirement, not an afterthought. The 2806-WH is confirmed compliant.

Deployment Considerations:

• This clip is series-specific — it is engineered for the 2800 Series uniduct platform. Do not assume cross-series compatibility with other Middle Atlantic duct families without confirming the clip profile matches.
• Sold as a single unit. For large runs requiring multiple clips, calculate your quantity before ordering to avoid multiple small orders and the associated lead-time delays on a project schedule.

The 2806-WH is the right spec for federal, government, or commercial integrators finishing or repairing a 2800 Series cable management run in a security operations center, network closet, or structured cabling environment where TAA compliance and a clean white finish are both required.