Middle Atlantic NM Cover Clip 2800 FOG WH - 2806-FW

Middle Atlantic 2806-FW Cover Clip Fitting for 2800 Series Cable Duct

The Middle Atlantic 2806-FW is a Fog White PVC cover clip designed for the Middle Atlantic 2800 Series Uniduct non-metallic raceway system. Where cable duct runs through open rack bays, overhead trays, or wall-mounted pathways, the cover clip secures the duct lid at regular intervals — preventing the cover from lifting, bowing, or separating from vibration, cable weight, or incidental contact. This is the kind of fitting that gets overlooked in the bill of materials until a technician is standing in a finished rack room wondering why the duct covers are popping off.

If you are specifying a complete cable management run with the 2800 Series duct, the 2806-FW (also searched as 2806 FW) is the retention fitting that keeps that installation looking and functioning as intended over the long term.

Key Features

• Designed for 2800 Series Raceway: The 2806-FW is dimensioned specifically for Middle Atlantic's 2800 Series Uniduct — not a universal-fit approximation. This means the clip engages the duct cover geometry correctly, so you get positive retention without forcing or shimming. Wrong-series clips either won't seat or will crack the cover lip over time.
• PVC Construction: Polyvinyl chloride holds its form across typical indoor installation environments, resists the minor chemical exposure common in equipment rooms (cleaning agents, flux residue), and won't corrode or oxidize the way metallic clips can in humid or coastal facilities. For non-metallic raceway systems, PVC-on-PVC contact also avoids galvanic incompatibility.
• Fog White finish: The Fog White color matches the 2800 Series duct body, so the finished installation presents a consistent appearance in clean-room, office, or commercial environments where exposed raceway is visible. Mismatched clip colors on a white duct run are a common cosmetic issue when substituting generic clips.
• Maximum cable diameter accommodation of 3.2 cm: The clip is sized to work with duct runs carrying cables up to 3.2 cm in diameter — covering typical Cat6, coax, and low-voltage control wiring bundles. If your run includes larger-diameter trunk cables or conduit, verify bundle diameter before specifying.
• TAA Compliant: The 2806-FW meets Trade Agreements Act requirements, making it eligible for use on federal, state, and municipal projects subject to TAA procurement rules. For integrators working government facilities or GSA schedule contracts, TAA compliance at the accessory level — not just the camera or switch — matters during audit.
• Single-unit packaging: Sold individually, which matters for maintenance and punch-list work where you need a specific count rather than a full box. Order exact quantities for retrofit fills, replacement of damaged clips, or phased rack builds.

Compatibility

The 2806-FW is rated for use with the Middle Atlantic 2800 Series non-metallic Uniduct cable duct. If you are building out a full raceway and cable duct system, pair this clip with the matching 2800 Series duct body and cover. Middle Atlantic's non-metallic raceway line includes straight runs, fittings, and transition pieces — the cover clip is a consumable item within that system, not a standalone product. For projects requiring rack accessories beyond cable management, verify fitting series compatibility before ordering.

Frequently Asked Questions

Q: Is the Middle Atlantic 2806-FW TAA compliant?

A: Yes. The 2806-FW is TAA compliant, making it suitable for federally funded projects and GSA schedule procurements requiring Trade Agreements Act conformance.

Q: What cable duct series is the 2806-FW compatible with?

A: The 2806-FW is designed specifically for the Middle Atlantic 2800 Series non-metallic Uniduct raceway system. It is not specified for other raceway series.

Q: What is the maximum cable diameter the 2806-FW accommodates?

A: The clip is rated for cables up to 3.2 cm in diameter. Verify your bundle diameter if running large-diameter trunk cables before specifying.

Q: What material is the 2806-FW made from?

A: It is manufactured from polyvinyl chloride (PVC), consistent with the non-metallic construction of the 2800 Series duct system.

Q: How many clips come in a package?

A: The 2806-FW is sold as a single unit (1 pc per pack), which allows precise quantity ordering for retrofit, replacement, or phased installations.

Q: What color is the 2806-FW?

A: Fog White — matched to the standard 2800 Series Uniduct finish for a consistent appearance on completed installations.

Karl Wilson

The 2806-FW is the kind of fitting I see left off BOMs until the field crew calls asking why duct covers are separating on a finished rack run. It is a single PVC cover clip rated for the 2800 Series Uniduct, accommodating cable diameters up to 3.2 cm — that spec matters when you are routing mixed Cat6 and coax bundles and need to confirm the clip seats without stressing the cover lip.

Technical Highlights:

• 3.2 cm max cable diameter: Covers the majority of low-voltage and structured cabling bundles used in AV and security installs — Cat6, RG59, and typical control wiring all clear this threshold comfortably.
• PVC construction: Eliminates any galvanic interaction with the non-metallic 2800 Series duct body. In humid or coastal environments where metallic clips can corrode and stain white duct surfaces, PVC-on-PVC stays clean.
• TAA compliance: Confirmed at the fitting level. For integrators bidding government or GSA contracts, having TAA-documented accessories simplifies procurement paperwork — auditors look at the full bill of materials, not just the cameras and switches.

Deployment Considerations:

• The 2806-FW is series-specific — it is dimensioned for the 2800 Series duct profile. Substituting clips from other Middle Atlantic raceway series risks a poor fit that either won't retain or will crack the cover edge under normal cable load.
• Sold as a single unit, so calculate your clip spacing requirements before ordering — typical installations space cover clips at regular intervals along the duct run. Ordering short means a second shipment delay on an otherwise complete installation.

This fitting belongs on every 2800 Series raceway BOM for commercial security and AV installs where finished appearance and long-term cover retention matter — particularly in client-visible equipment rooms and government facilities where the installation is subject to inspection.