Vertiv VRA6036 Networking Roof Panel 800 x 1200

Overview

The Vertiv VRA6036 is an 800 x 1200 mm networking roof panel designed to close out the top of Vertiv VR Series open-frame and enclosed racks. If you're building out a structured rack deployment and need a clean, finished top that manages cable entry points while keeping the interior contained, this is the panel to specify. At 800 mm wide and 1200 mm deep, it matches the footprint of the wider, deeper VR Series configurations — the same family that runs the VRA6020 solid top panel, with the VRA6036 being the networking variant optimized for cable pass-through at the roof.

Key Features

• 800 x 1200 mm footprint: Sized for the widest, deepest VR Series rack configurations. If your rack is 800 mm wide and 1200 mm deep, this panel drops in without cutting or shimming — no fitment guesswork on the job site.
• Networking-specific design: Differentiated from the standard solid top panels (VRA6019/VRA6020) by its networking cutouts, which allow structured cable routing from the top of the rack without compromising the enclosure's cable management discipline. Pair with VRA6021 top panel grommets to seal around cables and maintain airflow separation.
• Black finish: Matches the standard VR Series rack color, so the panel integrates visually without an obvious aftermarket look — relevant in customer-facing or co-location deployments where aesthetics matter.
• Single-unit pack (1 pc): Sold individually, making it straightforward to spec exactly the quantity you need per rack without over-ordering kit components.
• VR Series family integration: Designed alongside complementary accessories including bottom panels (VRA6038/VRA6040), side panels (VRA6010/VRA6012), and caster kits (VRA6024) — allowing you to fully enclose or configure an open VR rack from a single accessory line.

Integration & Compatibility

The VRA6036 is part of the Vertiv VR Series accessory family, which spans rack accessories including depth extensions, base kits, side panels, rails, and cable management brackets. For 800 mm wide racks at 1100 mm depth, specify VRA6035 instead. For 600 mm wide racks at 1200 mm depth, specify VRA6034. Confirm your rack's internal depth and width before ordering — the networking roof panel line covers four footprint combinations, and substituting the wrong depth panel requires a return.

If you need top-of-rack cable management in addition to the roof panel, review rack cable management options including the VRA6021 grommet kit, which installs directly into compatible top panels for clean cable ingress control.

Frequently Asked Questions

Q: What is the difference between the VRA6036 and the VRA6020?

A: Both cover the 800 x 1200 mm footprint, but the VRA6020 is a solid top panel while the VRA6036 is a networking roof panel with cutouts designed for cable pass-through. Choose the VRA6036 when you need structured cable entry at the top of the rack.

Q: Will the VRA6036 fit a rack that is 800 mm wide and 1100 mm deep?

A: No. The VRA6036 is sized for 800 mm wide by 1200 mm deep racks. For an 800 x 1100 mm footprint, specify the VRA6035 Networking Roof Panel instead.

Q: Can I use the VRA6021 grommets with the VRA6036?

A: The VRA6021 top panel grommets are listed as a companion accessory in the VR Series family and are designed to work with compatible top panels for cable sealing. Confirm fitment with your Vertiv documentation before ordering.

Q: Is the VRA6036 sold as a single unit or in a multi-pack?

A: The VRA6036 is sold as a single unit (1 pc per pack), so you can order exactly the quantity your project requires.