Panduit C2FAB07A1200B1 Net-Access S-Type Cabinet Front/Rear Section

Overview

The Panduit C2FAB07A1200B1 is a 700mm-wide S-Type front or rear section designed for the Panduit Net-Access cabinet line. At 0.9 kg per unit, it is a structural enclosure component — used to complete, replace, or configure the front or rear access points of an S-Type Net-Access cabinet enclosure in data centers, network closets, and physical security equipment rooms. If you are building out or servicing a Panduit network infrastructure installation, this panel is the field-replaceable or expansion piece that maintains the cabinet's structural and access integrity.

Key Features

• 700mm Cabinet Width (27.323 in): Sized to fit the standard 700mm-wide footprint in the Panduit Net-Access S-Type cabinet family — verify your cabinet's width before ordering. A mismatch here means the panel will not seat or latch correctly, so confirm the installed cabinet model before purchasing.
• S-Type Cabinet Architecture: The S-Type designation within the network cabinet and enclosure line refers to a specific Panduit cabinet chassis generation. This part is not interchangeable with C-Type or other Panduit chassis families — confirm the cabinet type on your existing enclosure label before ordering a replacement or additional section.
• Black Powder-Coat Finish: The black paint finish matches standard Panduit Net-Access cabinet aesthetics, keeping mixed-vintage cabinet refreshes visually consistent across rows in a data center or IDF closet.
• 0.9 kg Per Unit: At under 1 kg, the panel is easy to handle during installation or hot-swap maintenance — relevant when working in tight raised-floor environments or overhead cable trays where every pound matters during a single-person install.
• Front or Rear Orientation: The C2FAB07A1200B1 is specified as a front-or-rear panel, meaning a single part number covers both positions in a dual-access cabinet configuration. Confirm with your Panduit cabinet documentation which orientation is required for your specific rack layout.

Integration & Compatibility

This section fits Panduit Net-Access S-Type cabinet enclosures at the 700mm width. It is not a universal fit — network enclosure compatibility depends on matching the cabinet type (S-Type), width (700mm), and generation. Cross-reference the installed cabinet's model label or Panduit's cabinet documentation to confirm fit before ordering. For broader Panduit enclosure accessories including blanking panels, cable management, and mounting hardware, verify the cabinet family for each accessory independently.

Frequently Asked Questions

Q: What cabinet family does the C2FAB07A1200B1 fit?

A: It is designed for the Panduit Net-Access S-Type cabinet line at 700mm (approximately 27.3 inches) wide. It is not confirmed compatible with other Panduit cabinet types or widths without independent verification.

Q: Can the C2FAB07A1200B1 be used as both a front and rear panel?

A: The product is designated as a front-or-rear section for the S-Type cabinet. Confirm the required orientation against your specific cabinet model's documentation before installation.

Q: What is the weight of the C2FAB07A1200B1?

A: 0.9 kg (approximately 1.98 lbs) per unit.

Q: What color is the C2FAB07A1200B1?

A: Black, consistent with the standard Panduit Net-Access cabinet finish.

Jerry Tildsen

The C2FAB07A1200B1 is the kind of part that stops a cabinet refresh dead in its tracks when you order the wrong one — the 700mm S-Type designation is not interchangeable with other Panduit Net-Access chassis widths or types, and field teams sometimes conflate S-Type and C-Type cabinets on sight. At 0.9 kg it is a quick single-person install, but only after you have confirmed the cabinet label matches.

Technical Highlights:

• 700mm Width: Matches the specific footprint of the Net-Access S-Type line — not a universal fit; measure or check the cabinet label before shipping to site.
• S-Type Chassis Designation: Panduit uses distinct chassis generations; this part is built for S-Type geometry and will not seat correctly in other Net-Access variants.
• 0.9 kg Unit Weight: Light enough for a single-person overhead or raised-floor install without mechanical assist — a practical detail for IDF closet refreshes with limited staging space.

Deployment Considerations:

• Always cross-reference the installed cabinet's model number against Panduit's cabinet compatibility documentation before ordering — a wrong-generation panel is a return, not a field fix.
• The front-or-rear designation on this part number means you need to confirm orientation from your cabinet's specific configuration guide, not assume it is bidirectional without verification.

Best suited for facilities teams doing a planned refresh or field replacement on an existing Panduit Net-Access S-Type 700mm cabinet installation — not a universal enclosure spare.