Middle Atlantic 7011BDS CabinetMate Plug-In Outlet Center
Overview
The Middle Atlantic 7011BDS is a plug-in outlet center from the Middle Atlantic power and rack solutions line, designed for clean, accessible in-cabinet power distribution in AV, security, and IT enclosures. The 7011BDS ships with a 1.5 ft (0.5 m) cord — the short lead is intentional, keeping cable runs tidy inside a rack or cabinet without excess slack to manage. Rated at 15 amps, it covers typical low-to-mid draw equipment loads found in rack power distribution applications.
Key Features
- 15 Amp Rating: Handles standard branch circuit loads without tripping under normal multi-device cabinet configurations — verify your total connected draw stays within 80% of this (12A) for continuous operation per NEC guidelines.
- 1.5 ft (0.5 m) Cord: Short lead keeps internal cabinet wiring organized. Designed to reach a nearby PDU or outlet strip without creating excess cable bulk — particularly useful in shallow or mid-depth enclosures where cable management space is limited.
- TAA Compliant: Meets Trade Agreements Act requirements, making the 7011BDS eligible for federal, state, and government-contract purchasing where TAA compliance is a procurement requirement. Confirm your government IT procurement checklist before specifying.
Integration and Compatibility
The 7011BDS is designed to integrate with Middle Atlantic rack and cabinet enclosures as part of a coordinated in-cabinet power solution. Verify outlet spacing and mounting format against your specific enclosure model before ordering. For larger power distribution needs or installations requiring surge protection or remote monitoring, evaluate companion products in the Middle Atlantic power line.
Frequently Asked Questions
Q: Is the Middle Atlantic 7011BDS TAA compliant?
A: Yes. The 7011BDS is TAA compliant, making it eligible for use in federal and government-contract projects with Trade Agreements Act procurement requirements.
Q: What is the amperage rating of the 7011BDS?
A: The 7011BDS is rated at 15 amps. For continuous loads, keep connected equipment draw at or below 12 amps (80% of rated capacity) per standard electrical practice.
Q: How long is the power cord on the 7011BDS?
A: The cord measures 1.5 ft (0.5 m), sized for short in-cabinet runs to a nearby power source rather than wall outlet use.
Q: What enclosures is the 7011BDS designed for?
A: The 7011BDS is part of Middle Atlantic's CabinetMate outlet center series, designed to install inside Middle Atlantic rack and cabinet enclosures. Verify mounting compatibility with your specific enclosure model prior to ordering.
The 7011BDS is a straightforward in-cabinet outlet center — its 1.5 ft cord is the spec that tells the deployment story. That short lead is not a limitation; it is the design intent, placing power termination close to the source inside the enclosure rather than running long cords that create cable management problems in tight rack builds.
Technical Highlights:
- 15A Capacity: Sufficient for typical multi-device security or AV loads in a single cabinet bay. Keep aggregate draw under 12A for continuous-duty installations — the 80% NEC rule applies here regardless of the rated max.
- 1.5 ft Cord: Sized for plug-in use within the cabinet to an adjacent PDU outlet, not for running to a wall receptacle. If your power source is more than a foot or two away inside the enclosure, plan your PDU placement accordingly before committing to this unit.
- TAA Compliance: A procurement gate for government contracts. If the project spec sheet lists TAA compliance as a hard requirement, the 7011BDS checks that box without substitution.
Deployment Considerations:
- Confirm outlet count and spacing against your cabinet layout before ordering — the available evidence does not specify outlet configuration, so verify the product page or contact your Middle Atlantic rep for the full mechanical spec sheet.
- The 1.5 ft cord means this unit is not a standalone solution for powering equipment directly from a wall circuit — it requires a nearby PDU or outlet strip already installed in the same enclosure.
Best fit for government or enterprise AV and security rack builds where TAA compliance is a contract requirement and in-cabinet power termination needs to stay clean and short within a managed enclosure.
