Middle Atlantic 7011ULBC20R CabinetMate Plug-In Outlet Center
Overview
The Middle Atlantic 7011ULBC20R is a rack-mount outlet center designed for AV, security, and IT enclosures where you need a reliable 20-amp power distribution point without the overhead of a managed PDU. With 11 NEMA 5-20R receptacles on a single 20A circuit and a 6 ft (1.8 m) line cord, it gives rack integrators clean, serviceable power across a full bay of equipment — no separate power conditioning, no network card, no licensing. For straightforward installations where the goal is organized, code-compliant outlet capacity, the Middle Atlantic power distribution CabinetMate line is a well-established choice among rack power distribution solutions.
TAA compliance makes the 7011ULBC20R a viable option for government, defense, and institutional projects subject to the Trade Agreements Act. If your bid spec requires TAA-compliant components throughout the rack, this unit checks that box without forcing a more expensive managed PDU into the design.
Key Features
- 20-Amp Circuit Capacity: At 20A, this unit supports heavier per-rack loads than a standard 15A strip — relevant when you're powering NVRs, PoE switches, and encoders together in a single enclosure. Pair it with a 20A dedicated circuit breaker at the panel for a properly matched installation.
- 11x NEMA 5-20R Receptacles: Eleven individually accessible outlets across the unit face means you're not hunting for space or daisy-chaining adapters. The 5-20R receptacle accepts both standard 5-15P and 5-20P plugs, so mixed-plug equipment populates without adapters.
- 6 ft (1.8 m) Line Cord: The 6 ft cord reaches a wall or floor-mounted 20A outlet from most standard rack positions without extension cords — a clean, code-compliant run in typical telecom closet or equipment room layouts. For deeper rooms or ceiling-fed circuits, confirm the run length before specifying.
- TAA Compliant: Verified TAA compliance on the 7011ULBC20R supports procurement on GSA schedules and government contracts requiring Buy American / Trade Agreements Act sourcing. No separate compliance documentation required at the component level.
Integration & Compatibility
The 7011ULBC20R is designed as a plug-in outlet center for Middle Atlantic enclosures but will install in any standard rack enclosure with appropriate vertical space. The 5-20R receptacle format is compatible with virtually all commercial AV, security, and IT equipment using standard North American plugs. For installations requiring surge protection, UPS integration, or remote outlet switching, consider pairing with an upstream UPS or battery backup — the 7011ULBC20R provides distribution only, with no built-in surge or conditioning.
Frequently Asked Questions
Q: Is the Middle Atlantic 7011ULBC20R TAA compliant?
A: Yes. The 7011ULBC20R is verified TAA compliant, making it suitable for government and institutional procurement on GSA schedules and projects subject to Trade Agreements Act requirements.
Q: How many outlets does the 7011ULBC20R have?
A: The 7011ULBC20R provides 11 NEMA 5-20R receptacles on a single 20-amp circuit.
Q: What is the cord length on the 7011ULBC20R?
A: The line cord is 6 ft (1.8 m), which is the standard run length for most rack-to-wall outlet installations in equipment rooms and telecom closets.
Q: What plug type does the 7011ULBC20R use?
A: The unit has NEMA 5-20R receptacles, which accept both standard 5-15P and 5-20P plugs — no adapters needed for mixed equipment.
Q: Does the 7011ULBC20R include surge protection?
A: No. The 7011ULBC20R is a straight power distribution unit with no built-in surge suppression or power conditioning. For surge or UPS protection, install an upstream conditioner on the same circuit.
The 7011ULBC20R is the spec I reach for when a rack needs clean 20A distribution without the cost or complexity of a managed PDU. Eleven 5-20R outlets on a single 20-amp circuit, 6 ft cord, TAA compliant — it covers most standard security and AV enclosure builds where the priority is outlet capacity, not remote monitoring.
Technical Highlights:
- 20A Circuit Rating: The step up from 15A matters in security racks running NVRs, PoE switches, and video encoders simultaneously — a 15A strip will trip under that combined draw; the 7011ULBC20R holds the load with headroom.
- 11x 5-20R Receptacles: The 5-20R accepts 5-15P plugs as well, so you're not managing a mix of adapter dongles when equipment from different vendors populates the rack.
- TAA Compliance: Verified on this SKU — useful when you're specifying for a government facility or institutional project where every line item on the BOM needs TAA documentation.
Deployment Considerations:
- Confirm the building circuit feeding this unit is a dedicated 20A breaker with a 5-20R wall receptacle — plugging a 20A strip into a 15A outlet via an adapter is a code violation and a fire risk.
- No surge suppression is built in. For rack equipment with sensitive electronics, an upstream UPS or surge PDU on the same circuit is the right call, not this unit alone.
Best fit for a government or institutional AV/security enclosure where TAA compliance is a hard bid requirement and the electrical infrastructure is already provisioned for 20A — the 7011ULBC20R drops in cleanly and satisfies procurement without overengineering the power layer.
