StarTech CLPSCRW1032 10-32 Rack Mounting Screws (50-Pack)

Overview

The StarTech CLPSCRW1032 is a 50-count pack of 10-32 threaded mounting screws built for securing equipment into square-hole server racks and cabinets fitted with cage nuts. If you're commissioning a new rack of switches, patch panels, NVRs, or A/V gear and you've come up short on hardware — or you're standardizing spares across multiple racks — this is the fastener spec most enterprise and data center rail kits are built around. CLPSCRW1032 ships in a black-and-silver finish and covers a full rack build without you needing to source loose screws from a hardware store bin.

Key Features

• 10-32 Thread Type: matches the thread standard used by the overwhelming majority of server rack cage nuts and rack-mount rail kits, so you're not stuck guessing compatibility between a 10-32 and M6 cage nut system before you mount a single unit.
• 50-Piece Package Quantity: enough hardware to fully populate a mid-size rack build (switches, patch panels, shelf brackets, PDUs) without reordering mid-install — useful when you're staging a multi-rack rollout and want one consistent SKU across the job.
• Compact 0.7 in Length: short enough to seat cleanly in standard cage nut channels without bottoming out or protruding into cable pathways behind the rail — matters in dense racks where rear clearance is already tight.
• Black & Silver Finish: low-visibility hardware that doesn't stand out against dark rack rails, keeping a clean look on customer-facing or data-center-floor installs.
• Lightweight at 13.6 oz per 50-Pack: easy to keep as bench stock or carry in a field tech's kit bag without adding meaningful weight to a service truck or install cart.
• Lifetime Warranty: hardware this small is easy to lose, not fail — but the coverage means any manufacturing defect in the CLPSCRW1032 batch is StarTech's problem, not yours.

Integration & Compatibility

CLPSCRW1032 is a generic 10-32 cage nut screw, which makes it compatible by thread standard with most square-hole rack rails and cage nut hardware regardless of the equipment brand — this is fastener hardware, not device-specific mounting. It pairs naturally with any gear you're racking, from network video recorders to switches and A/V equipment. If you're speccing out a full rack build, it's worth reviewing a PoE network switch lineup alongside your rail and screw hardware so power budget and port count are settled before mounting day. For broader rack planning — cage nut spacing, rail depth, and U-height budgeting — a VMS architecture planning guide is a useful reference point when you're laying out where recording infrastructure lands in the rack. Browse the full StarTech catalog for matching rail kits, cable management, and rack accessories, or check the broader mounts and accessories category if you need brackets and shelving to go with the screws. For camera-side hardware headed into the same rack, the PoE planning guide covers switch and cabling considerations that pair well with a rack-mount NVR build.

What's in the Box

• 50x StarTech CLPSCRW1032 10-32 mounting screws

Frequently Asked Questions

Q: What thread size is the CLPSCRW1032?

A: 10-32 thread, matching standard server rack cage nut hardware.

Q: How many screws come in one pack?

A: Each CLPSCRW1032 package contains 50 screws.

Q: What's the warranty on the CLPSCRW1032?

A: CLPSCRW1032 carries a lifetime warranty.

Q: What color is the CLPSCRW1032 hardware?

A: Black and silver finish.

Q: Will the CLPSCRW1032 work with any rack brand?

A: It's a standard 10-32 thread screw, so it fits any rack rail or cage nut system using that same thread standard.

Jerry Tildsen

I keep a box of CLPSCRW1032 on the bench at all times — 10-32 is the thread you'll run into on most square-hole racks, and running out mid-install is a wasted trip. This pack gives you 50 screws, which is usually enough for a full switch-and-NVR rack plus a couple of shelf brackets.

Technical Highlights:

• 10-32 Thread Type: matches the cage nut standard on the majority of enterprise rack rail systems, so there's no compatibility guesswork before mounting.
• 50-Piece Count: covers a mid-size rack build in one SKU instead of splitting an order across multiple small packs.
• 0.7 in Length: short enough to seat fully in the cage nut without fouling cable runs directly behind the rail.

Deployment Considerations:

• Confirm your rack uses square-hole cage nuts before ordering — round-hole or pre-threaded rails use different hardware entirely.
• At 13.6 oz for the whole 50-pack, these are easy to lose track of on a job site — keep them in a labeled bin rather than loose in a tool bag.

Good fit for a data center or server room build-out where you're racking switches, NVRs, and patch panels in the same run and want one consistent screw SKU across every rail.