Panduit CFPL4IW-X Mini-Com 4-Port Classic Faceplate

The Panduit CFPL4IW-X is a 4-port classic faceplate from the Pan-Net Mini-Com line, finished in off white to blend with standard commercial wall plates. Designed to accept Mini-Com modular inserts, it gives structured cabling installers a clean, consistent termination point for patch panels, workstation outlets, and horizontal cabling runs without requiring custom fabrication.

Overview

The CFPL4IW-X follows Panduit's Mini-Com Classic form factor — a widely deployed standard in commercial low-voltage cabling. The four-port layout accommodates a mix of insert types (data, voice, fiber, coax, or blank covers) within the same faceplate housing, making it straightforward to configure a single outlet for a workstation with dual data plus a phone jack and a spare, or any equivalent combination. The off white color aligns with the majority of commercial wall plate conventions and coordinates across the Mini-Com accessory family. For environments where a structured cabling system is being built or extended to Panduit standards, this is a workmanlike component that keeps the installation consistent.

Key Features

• 4 Mini-Com Insert Ports: Four independent port openings accept any standard Mini-Com modular insert — copper, fiber, coax, or blank — so a single faceplate can serve mixed-media workstation requirements without stacking separate plates or using adapter frames.
• Classic Form Factor: The Classic housing profile mounts to a standard single-gang electrical box, which matters on retrofit projects where existing gang boxes are already in the wall. No special boxes, no adapters needed.
• Off White Finish: Panduit's off white matches standard commercial construction paint colors better than bright white in most install environments, reducing the visual mismatch between faceplates and painted drywall — a minor but persistent annoyance on finished installs.
• Pan-Net Product Line: Part of Panduit's Panduit structured cabling Pan-Net ecosystem, which means insert compatibility is consistent across the entire Mini-Com catalog. Mixing Jack types, blank inserts, or fiber adapters from the same family won't introduce fitment surprises.
• Modular Insert System: The snap-in Mini-Com insert format means port assignments can be reconfigured in the field without replacing the faceplate — pull an old jack, snap in a new one. Useful during moves, adds, and changes without rerunning cable or repainting wall surfaces.
• Commercial-Grade Construction: Built to the dimensional and material standards Panduit applies across its commercial cabling line — consistent port spacing, positive insert retention, and a finish that resists yellowing under standard office lighting conditions.

Integration & Compatibility

The CFPL4IW-X (often searched as CFPL4IW X) accepts Panduit Mini-Com modular inserts across the full catalog range — Cat 5e, Cat 6, Cat 6A, fiber SC/LC adapters, coax, and blank covers. It mounts to a standard single-gang electrical box using conventional low-voltage faceplate hardware. For projects specifying complete patch panel and outlet consistency, pairing this faceplate with Mini-Com keystone jacks from the same Pan-Net line ensures the assembly meets the channel performance spec the jacks are rated to. If you're running network switches to the workstation edge and need a clean outlet presentation, the four-port layout gives enough flexibility to terminate data, voice, and a spare without a second plate.

Frequently Asked Questions

Q: What insert types are compatible with the CFPL4IW-X?

A: The CFPL4IW-X accepts Panduit Mini-Com modular inserts, including copper keystone jacks (Cat 5e, Cat 6, Cat 6A), fiber adapter inserts (SC, LC), coax inserts, and blank covers. Any standard Mini-Com format insert from the Pan-Net line will fit.

Q: What electrical box does the CFPL4IW-X mount to?

A: It mounts to a standard single-gang electrical box using conventional low-voltage faceplate mounting hardware. No specialty boxes or adapters are required.

Q: How many ports does the CFPL4IW-X have?

A: Four ports. Each port accepts one Mini-Com modular insert independently, so you can mix insert types within the same faceplate.

Q: What color is the CFPL4IW-X?

A: Off white — Panduit's standard commercial color for the Classic faceplate line, intended to coordinate with typical commercial construction paint and drywall finishes.

Q: Can I reuse the CFPL4IW-X faceplate if I need to change the jack type later?

A: Yes. Mini-Com inserts snap in and out without tools, so you can swap insert types during moves, adds, and changes without replacing the faceplate or disturbing the wall surface.

James Everett

The CFPL4IW-X is a four-port Mini-Com Classic faceplate — straightforward on the surface, but the four-port layout is the spec that actually matters when you're provisioning mixed-use workstation outlets. Most office and light industrial builds end up needing data plus voice plus a spare at each drop, and the four-port count gives you that without stacking plates or cutting a second gang opening.

Technical Highlights:

• 4-Port Layout: Four independent Mini-Com insert slots in a single-gang footprint — enough for dual data, one voice, and one blank or secondary data port at a standard workstation drop, all from a single plate.
• Mini-Com Insert Compatibility: The Pan-Net Mini-Com snap-in format covers copper Cat 5e through Cat 6A, fiber SC/LC adapters, coax, and blanks — so the CFPL4IW-X can serve essentially any low-voltage outlet requirement without sourcing a different faceplate model.
• Off White Finish: Matches the majority of commercial construction paint standards better than bright white, which tends to look mismatched against aged or custom-tinted drywall within the first year of an install.

Deployment Considerations:

• Confirm your Mini-Com insert model numbers before ordering in quantity — the Classic faceplate is insert-compatible across the full Mini-Com catalog, but insert port count and faceplate port count must match your outlet design per station.
• This faceplate has no built-in cable management, strain relief, or labeling window. If your cabling standard requires label identification at the outlet, plan for a separate label or use a Mini-Com insert with an integrated label field.

The CFPL4IW-X is a practical pick for open-office build-outs and structured cabling retrofits where workstation outlets need to carry mixed media — data, voice, and spare — under a single consistent Panduit plate across dozens or hundreds of drops.