Panduit CFP4WH 4-Port Mini-Com Faceplate

The Panduit CFP4WH is a single-gang 4-port faceplate designed for high-density structured cabling deployments in commercial security, access control, and IP camera installations. Part of the Pan-Net Classic series, this white ABS faceplate accepts any four Panduit Mini-Com modules—copper keystone jacks, fiber adapters, A/V inserts, or blank modules—giving installers field-configurable flexibility to mix media types within a single wall or surface box. The vertical snap-in design speeds terminations in multi-drop surveillance corridors, IDF cross-connects, and retrofit projects where space is constrained and cable dress matters.

Key Features

• Four Mini-Com module ports in a standard single-gang footprint (4.5" H × 2.75" W) maximize density without requiring double-gang boxes
• Snap-in Mini-Com module retention—no screws or clips—speeds moves/adds/changes and reduces installer fatigue on large rollouts
• Vertical port stacking orients jacks for clean cable dress when routed from above or below the box
• Molded ABS construction resists impact and UV discoloration in open-ceiling IDF environments
• Accepts any Mini-Com insert type: Cat 6A/Cat 6/Cat 5e copper jacks, LC/SC fiber adapters, HDMI/USB/coax modules, or blanks
• Integrated label windows on each port position support wire-map documentation and asset tagging
• Ships with mounting screws compatible with standard NEMA single-gang electrical boxes and low-voltage mud rings
• RoHS compliant for specification-driven projects requiring environmental certifications

The CFP4WH's single-gang form factor solves a recurring problem in retrofit IP camera and access control installations: delivering four drops to a single location—typically two PoE camera feeds, one card reader connection, and one request-to-exit sensor—without cutting oversized holes or surface-mounting bulky enclosures. The vertical port layout naturally aligns with top-fed or bottom-fed conduit runs, keeping cable bend radius within TIA-568 limits even in shallow 1.5"-deep boxes. Each Mini-Com port uses Panduit's tool-free snap-latch retention; modules click in with tactile feedback and pull out with fingertip pressure on the release tab, eliminating the screw-down headaches common with traditional insert plates. This is critical in occupied spaces where post-occupancy changes happen frequently—law offices adding VoIP phones, schools reconfiguring classrooms for interactive displays, hospitals adding nurse-call integration—because non-technical facility staff can swap modules without opening the wall box or risking cross-pair shorts.

Material selection reflects real-world abuse: the ABS body withstands the flexing that occurs when installers push slack back into overfilled boxes, and the white finish is UV-stabilized to prevent the yellowing seen on cheaper polycarbonate plates after a year under fluorescent warehouse lighting. The faceplate mounts to any standard single-gang electrical box (steel, PVC, or old-work), low-voltage mud ring, or Panduit's own JBP series surface boxes using the included #6-32 screws; the screw-slot geometry is oversized vertically to allow ±3 mm vertical adjustment for alignment with crooked box ears. Each port position has a molded recess behind the module that provides clearance for conductor strain relief boots—relevant when terminating shielded jacks where the drain wire pigtail occupies extra depth—and prevents the "module won't seat flush" problem that forces installers to trim boots in the field. The label area below each port accepts standard 0.5" × 0.75" adhesive wire-marker labels or Brother TZe cassette output, large enough for asset tags (CAM-104-A) or end-user identifiers (Conference Rm Podium) without abbreviations.

The CFP4WH is a drop-in equivalent for legacy Panduit CFP4-X faceplates, Leviton 41080-4WL, Hubbell IFP14W, and Siemon MAX 6644 series single-gang 4-port plates, making it a line-item match for spec upgrades and maintenance stock consolidation. RoHS compliance satisfies federal and LEED v4.1 material disclosure requirements without requiring substitute-material approval. For integrators managing inventory across commercial security, AV, and data infrastructure projects, the CFP4WH delivers the port density needed for modern IP endpoints—cameras, intercoms, wireless APs, door controllers—in the same wall-box real estate that legacy analog systems used for a single coax drop.