Panduit CFPSL2IWY Pan-Net 2-Port Angled Mini-Com Faceplate

The Panduit CFPSL2IWY is a sloped 2-port Mini-Com faceplate designed for structured cabling installations where angled cable exit improves cable management and reduces strain at the termination point. Built from impact-resistant ABS in an off-white finish, this Classic Series faceplate accommodates two Mini-Com modules in a compact 2.75" × 4.5" profile that fits standard single-gang electrical boxes. The angled port orientation guides patch cords downward or horizontally away from the wall, reducing bend radius stress and simplifying cable routing in crowded work areas, conference rooms, and equipment racks. Installers working under tight deadlines will appreciate the snap-in module retention that eliminates screws and the included label holder with clear cover that protects port identification from wear and moisture.

Key Features

• Angled Port Design: Sloped module orientation guides cables away from the wall, reducing strain and improving cable management in high-density environments
• Universal Mini-Com Compatibility: Accepts any Panduit Mini-Com module — copper keystones, fiber adapters, A/V inserts, or blanks — for flexible voice, data, and multimedia connectivity
• ABS Construction: Impact-resistant thermoplastic housing withstands installation handling and long-term wall exposure without cracking or discoloration
• Integrated Label System: Built-in label holder with protective cover keeps port identification legible through years of plug/unplug cycles and cleaning
• Single-Gang Footprint: 2.75" × 4.5" faceplate mounts to standard North American single-gang electrical boxes or Panduit surface-mount boxes
• Off-White Finish: Neutral color blends with most commercial wall finishes and coordinates with standard electrical devices

The CFPSL2IWY's angled design addresses a common field problem: patch cords exiting perpendicular to the wall in tight spaces — behind desks pushed against walls, in shallow equipment cabinets, or at workstation panels — create sharp bends that exceed the 4× cable diameter minimum bend radius specified in TIA-568. Over time, these bends degrade twisted-pair geometry, increase insertion loss, and cause intermittent link failures that are difficult to troubleshoot. The sloped port face rotates the cable exit point approximately 30° downward, allowing a gradual bend that maintains the cable's internal structure. For fiber applications, this same geometry prevents micro-bending losses in tight routing scenarios. The faceplate's 2-port capacity supports the typical office or classroom deployment — one port for network data and one for VoIP — while leaving room in the electrical box for power outlets on a separate device.

Mini-Com modules snap into the faceplate from the front without tools, held by spring fingers that lock the module's side rails. This front-loading design lets technicians add, remove, or swap modules after the faceplate is mounted — critical for phased fit-outs where voice and data circuits are pulled at different times, or for reconfiguring port types when a space changes from office to conference use. The module pockets accept Panduit's full Mini-Com family: Cat 6A shielded and unshielded keystones, LC and SC fiber adapters, HDMI and USB inserts, coax F-connectors, and blank plates. Installers can populate one port initially and leave the second capped with a blank until the tenant's IT team activates the circuit, avoiding the "unused open port" look that property managers dislike. The label holder spans both ports and accepts adhesive-backed laser labels or handwritten paper inserts up to 1.5" × 0.4", protected by a clear hinged cover that snaps closed. Unlike adhesive labels applied directly to the faceplate, this system allows label replacement without residue or damage.

Panduit specifies ABS thermoplastic for the faceplate body — the same material used in electrical device wallplates — chosen for its high impact strength, dimensional stability across temperature swings, and resistance to cleaning chemicals commonly used in commercial buildings. The off-white color (Panduit's "blanc cassé" or "Classic Ivory") matches NEMA WD-6 designation for coordinating wiring devices and is less stark than pure white under fluorescent or LED office lighting. The faceplate ships as a single unit with the label holder and blank label insert included; modules are sold separately. Carton quantity is 10 faceplates for contractors stocking materials ahead of multi-floor or campus buildouts.

This faceplate is part of Panduit's Pan-Net structured cabling system, which includes matching surface-mount boxes, cable management accessories, and a full range of copper and fiber connectivity modules. For installations requiring more than two ports at a single location, Panduit offers 4-port and 6-port angled faceplates in the same Classic Series profile. The CFPSL2IWY is suitable for commercial office, education, hospitality, and light industrial environments where structured cabling infrastructure must balance performance, maintainability, and architectural aesthetics. It is not rated for outdoor or wet-location use; for exterior or high-moisture applications, use Panduit's weatherproof surface-mount enclosures with gasket seals.