Custom America POS 4B000000113200 EVO Pro Cash Drawer Lock + 2 Keys
The Custom America POS 4B000000113200 is a factory OEM replacement lock and key set engineered for the EVO Pro cash drawer family. This 15-series lock assembly addresses wear, mechanical failure, or the operational need for spare keyed sets across multiple registers or locations. Each kit includes one lock mechanism and two matching keys, eliminating separate procurement cycles and ensuring consistent key management across your point-of-sale hardware fleet.
Key Features
- OEM Specification Match: Engineered to Custom America POS EVO Pro mechanical tolerances. Direct factory replacement with zero modification required.
- 15-Series Lock Mechanism: Durable pin-and-tumbler design rated for high-cycle commercial use in busy retail and hospitality environments.
- Dual Key Set: Two matching keys included per kit. Supports shift handoffs, operator rotation, and emergency backup access without fabricating additional keys off-site.
- Quick Installation: Drop-in replacement — no drilling, no adapter plates, no technician callouts. Field-swappable within 5–10 minutes of drawer power-down.
- Cross-Location Consistency: All keys from the same SKU operate identically. Reduces training overhead and eliminates operator confusion when managing multiple drawer units.
- Corrosion-Resistant Housing: Zinc-plated lock body withstands daily contact, cleaning agents, and humidity in kitchen and bar environments without oxidation or binding.
Wear on cash drawer locks is inevitable in high-transaction environments. The pin stack deteriorates from constant key insertion and removal; eventually, the key no longer seats firmly or turns smoothly, forcing the drawer into a perpetually unlocked or jammed state. Rather than retire a functioning drawer enclosure, OEM replacement locks like the 4B000000113200 extend hardware lifespan at a fraction of the cost of a complete drawer replacement. For multi-register sites, spare keyed sets reduce downtime — an operator can swap a failed lock in seconds rather than wait for locksmith service or key duplication.
Integration is mechanical only — no electronic firmware, no API binding, no compatibility matrix beyond EVO Pro drawer form factor. This simplicity is a feature: lock failure is isolated to the physical key-turn mechanism and does not cascade into your POS application, payment gateway, or register database. The drawer simply won't open until the lock is replaced. For hospitality and retail chains running standardized hardware across dozens of locations, bulk procurement of spare locks and keys reduces total cost of ownership and operational friction. Order multiple kits and distribute them to regional warehouses for just-in-time replacement without technician truck rolls.
Custom America POS hardware carries manufacturer warranty on all components. When specifying this lock for EVO Pro drawer maintenance programs, verify your drawer serial number against the compatibility matrix — this lock will not retrofit 15-series equipped EVO Pro units or other drawer families. If you are uncertain whether your drawer is EVO Pro or an older Custom America POS line, contact technical support with your drawer model number before ordering.
Jerry TildsenPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
We've worked with hundreds of POS drawer replacement jobs across casual dining, quick service, and retail chains, and lock wear is consistently the first mechanical failure point integrators see in the field. The Custom America POS 4B000000113200 is the textbook OEM solution — it's a direct bolt-in replacement that requires no adapter plates, no case modifications, and no fumbling with aftermarket universal locks that never quite align. The 15-series mechanism is robust for high-transaction sites; we've seen single locks survive 50,000+ open cycles before meaningful wear. Where this kit really shines is in multi-location rollouts: a restaurant group with 30 registers across 12 locations can stock spare locks and keys at each site, cutting the delta between a stuck drawer and operational recovery from a technician call (2–4 hours, possibly overnight in remote areas) down to a 5-minute field swap. The dual-key model is deliberate — one key stays with the manager on a master ring, the other is assigned to the lead cashier or shift supervisor. No single point of failure if a key is lost. On the cost front, lock replacement runs 10–15% of a full drawer replacement and eliminates capital expenditure on hardware that otherwise functions perfectly.
Technical Highlights:
- 15-Series Mechanical Specification: PIN-and-tumbler lock rated for 50,000+ cycles. The mechanism is entirely mechanical — no solenoid, no electronic feed, no dependency on drawer power supply. Failure is purely wear-based and predictable.
- Factory OEM Engineering: Manufactured to Custom America POS EVO Pro dimensional and spring-tension tolerances. No shimming, no rekeying, no compatibility guessing — this lock was designed for this drawer.
- Zinc-Plated Steel Housing: Resists rust and oxidation in humid or cleaning-chemical environments. Stainless fasteners prevent galvanic corrosion at the lock mounting interface.
- Keyed-Alike Within SKU: Both keys from a single 4B000000113200 kit operate the same lock. You can order multiple kits and all keys will be interchangeable — useful for standardized key rings across a chain.
- No Electronic Integration Required: The drawer remains operational during lock replacement; POS application and payment systems are completely unaffected. This isolation is critical in high-uptime environments.
Deployment Considerations:
- EVO Pro Compatibility Only: This lock will fit ONLY the Custom America POS EVO Pro drawer family. If you operate a mixed fleet of EVO, EVO Plus, and legacy Custom America POS line (15-series versus 16-series), you must verify drawer model numbers before bulk ordering. A single incorrect order creates on-site incompatibility and delays.
- Key Management: Establish a key-control protocol before deployment — designate who holds which key, maintain a key log, and ensure spare keys are stored separately from the drawer. Losing both keys to a single lock eliminates access until a locksmith reworks the mechanism or the lock is drilled out.
- Installation Timing: Perform lock replacement during closed hours or before opening shift. The drawer will be completely non-functional while the lock is being swapped. Budget 5–10 minutes per unit plus time for staff to verify key operation post-replacement.
- Bulk Stocking Strategy: For chains operating 10+ drawers, purchase at least one spare 4B000000113200 kit per site plus one roving backup. Failure rates are low but not zero; having a spare on-hand eliminates overnight downtime and technician calls.
- Key Duplication Outside the Franchise: Do NOT attempt to duplicate keys to this lock via local locksmiths. The 15-series key blank is Custom America POS proprietary; most locksmiths will not carry the blank or will create an imprecise copy. Order spare keys directly from the manufacturer or your distributor.
The Custom America POS 4B000000113200 is the right choice for integrators and restaurant groups running EVO Pro drawers who need preventive maintenance spares, replacement locks for worn units, or standardized key management across multiple locations. For specifications, compatibility verification, and bulk pricing, refer to the Custom America POS catalog.
