Lifesafety Power

Lifesafety Power · B150-BOXED

Lifesafety Power B150-Boxed Quick Guide B150

Compact battery backup enclosure that solves a critical deployment problem: keeping your access control panels, security systems, and edge-mounted

• Delivers 4–8 hours of AC-fail backup at 12VDC/75W for access control and PoE loads.
• Weatherproof compact enclosure supports outdoor junction boxes and electrical closets.
• DIN-rail and wall-mount options reduce commissioning labor and simplify future maintenance.

Lifesafety Power · B100F8PE4M-WP-AWS01

Lifesafety Power B100F8PE4M-WP-AWS01 12V Secondary

12V secondary voltage expansion module designed to distribute power to multiple egress control and access devices

• Adjustable 5–18V output at up to 4A per circuit supports diverse egress device loads.
• 8 PTC-supervised outputs provide automatic overcurrent protection across all connected loads.
• E4 enclosure (24×20×6.5 in) arrives prewired with Panduit–Phoenix terminals for fast install.

Lifesafety Power · ATM-3-FUSE-BOXED(BAGOF25)

Lifesafety Power Atm-3-Fuse-Boxed(BAGOF25) Fuse Atm-3 32V

32V, 3A replacement fuse designed for Lifesafety Power backup power supplies and UPS systems

• Rated 32V DC / 3A to protect access control and door strike branch circuits.
• Pack of 25 keeps spare inventory on hand for multi-site emergency replacements.
• Designed for Lifesafety Power ATM-series backup supplies and UPS enclosures.

Lifesafety Power · AH2-BOXED

Lifesafety Power AH2-BOXED AC Helix module redundant AC power

Redundant AC power expansion module that integrates into the Lifesafety Power Helix family

• Dual independent AC inputs eliminate single-point-of-failure on AC mains.
• Accepts 110–230V AC input, supporting both North American and international feeds.
• Expands Helix series controllers with hot-failover AC redundancy for 24/7 uptime.

Lifesafety Power · ACCESSORY-CABLE-12-SET-OF-2

Lifesafety Power ACCESSORY-CABLE-12-SET-OF-2

Two-pack of 12-inch power cables engineered for surveillance and access control installations where short-run wiring is required

• 12-inch length eliminates cable slack and reduces clutter in compact cabinet installs.
• Two-pack format provides a spare on hand, cutting reorder cycles across multi-site deployments.
• Rated for 24 VDC, matching Lifesafety Power supply outputs for direct, compatible interconnects.

Lifesafety Power · AC-CABLE-4-FEET-BOXED-SET-OF-2

Lifesafety Power AC-CABLE-4-FEET-BOXED-SET-OF-2

Four-foot AC power cords supplied as a boxed set of two units

• Four-foot length suits standard rack or wall-mount AC runs without excess slack.
• Two-unit boxed set supports redundancy planning or simultaneous multi-device deployment.
• Designed for Lifesafety Power supplies and control modules requiring AC mains connection.

Lifesafety Power · AC-CABLE-18-BOXED-SET-OF-2

Lifesafety Power AC-Cable-18-Boxed-Set-Of-2 AC Cable Harness

N 18-inch AC power cable harness sold as a matched pair, designed specifically for Lifesafety Power FPO series power supplies

• 18-inch length routes cleanly to FPO series AC input without extension cables or splices.
• Two-pack per box lets you stage a spare on-site, avoiding service delays on second deployments.
• Connector pinout matches FPO series units at 120 VAC, ensuring rated compatibility at installation.

Lifesafety Power · FPO250-2D8PE2M

Lifesafety Power FPO250-2D8PE2M FPO250-2D8PE2M

Compact, 250-watt regulated power supply designed for small-to-mid-scale security and access control deployments

• 250W regulated output powers cameras, readers, and locks from a single source.
• Dual-output design eliminates separate wall supplies across multi-device deployments.
• Battery backup support maintains door access and surveillance during mains failures.

Lifesafety Power · FPO250-2F8PE1

Lifesafety Power FPO250-2F8PE1 FPO250-2F8PE1

250W AC-to-DC power supply built for distributed access control, intrusion detection, and low-voltage camera lighting circuits in commercial security

• 250W supply delivers 20A@12V or 10A@24V selectable output for field devices.
• 16 FAI outputs at 2.5A each eliminate daisy-chaining across locks, sensors, and strobes.
• E1 enclosure suits indoor closets and server rooms; no drivers required for integration.

Lifesafety Power · FPO150/250-C8D8E2

Lifesafety Power FPO150/250-C8D8E2 FPO150/250-C8D8E2

Hardened power supply enclosure designed to feed security systems requiring split 12V/24V supplies

• Dual-output design delivers 150W at 12V or 250W at 24V from a single 120VAC input.
• Eight individually fused 3A auxiliary outputs isolate fault events to a single branch circuit.
• E2-rated enclosure resists dust and moisture ingress in mechanical rooms or harsh cabinets.

Lifesafety Power · FPO150/250-E2

Lifesafety Power FPO150/250-E2 FPO150/250-E2

Modular power supply enclosure built for access control, intercom, alarm, and IP camera systems requiring dual voltage operation in constrained spaces

• Delivers 150W base capacity (12A @ 12V or 6A @ 24V) for cameras, access control, and alarms.
• Expands to 250W (20A @ 12V or 10A @ 24V) via add-on module—no enclosure replacement required.
• DIN-rail compatible for clean integration into control rooms and MDF closet installations.

Lifesafety Power · FPO150/250-2C82D8PE8V

Lifesafety Power FPO150/250-2C82D8PE8V Power supply board 150W

150W power supply board engineered for security integrators deploying multi-camera surveillance systems and access control infrastructure

• Delivers 12A at 12VDC or 6A at 24VDC to support mixed-voltage endpoint loads.
• Dual-output design powers 12V and 24V devices from a single 150W board.
• Board-level form factor integrates into modular rack enclosures for distributed power.

Lifesafety Power · FPO75-D8E4M

Lifesafety Power FPO75-D8E4M FPO75-D8E4M

75W redundant power supply designed to eliminate single points of failure in distributed security installations

• 75W redundant supply eliminates single points of failure in distributed security installs.
• Dual independent AC input channels auto-switch on failure without dropping the connected load.
• Fits access control and surveillance power distribution architectures requiring redundancy.

Lifesafety Power · FPO150/250-C8D8E4

Lifesafety Power FPO150/250-C8D8E4 FPO150/250-C8D8E4

Dual-output redundant power supply designed to eliminate single points of failure in security and access control deployments

• Dual isolated 8A outputs prevent a single circuit failure from cascading to other loads.
• Supervised battery backup circuits alert operators immediately to AC loss or battery degradation.
• DIN-rail mountable enclosure integrates directly into standard security cabinets and control rooms.

Lifesafety Power · FPO75-D8E2M

Lifesafety Power FPO75-D8E2M FPO75-D8E2M

Compact, wall-mounted uninterruptible power supply (UPS) designed to maintain power to critical security equipment during AC mains failure

• 75W UPS capacity sustains access control readers, locks, and intercoms during AC failure.
• Compact wall-mount form factor fits tight ceiling and wall cavities in small-to-medium installs.
• Battery backup operation maintains power continuity for light-duty surveillance equipment on-site.

Lifesafety Power · FPO150/250-2C8P2D8PE4M1

Lifesafety Power FPO150/250-2C8P2D8PE4M1

Dual-output industrial power supply engineered for distributed security and access-control deployments

• Dual independent output channels power separate subsystems from one enclosure.
• Reduces single-point-of-failure risk across multi-zone security deployments.
• Rack- or wall-mountable design simplifies distributed access control installations.

Lifesafety Power · FPO150/150-2C8P2D8PE8M1

Lifesafety Power FPO150/150-2C8P2D8PE8M1

150W power distribution unit designed to supply multiple networked security cameras, access control readers, and auxiliary devices in integrated

• Dual isolated outputs let you segregate camera and reader/lock circuits in one enclosure.
• 150W total capacity supports multiple IP cameras, access readers, and auxiliary devices.
• Centralized power distribution reduces field wiring complexity in rack or wall-mount cabinets.

Lifesafety Power · FPO150-B100C8PE4M1

Lifesafety Power FPO150-B100C8PE4M1 FPO150-B100C8PE4M1

150-watt managed power supply designed to centralize voltage distribution and load management across networked surveillance installations

• 150W managed supply centralizes power for 4–8 camera circuits in one unit.
• Per-channel fault isolation prevents a single load failure from taking down adjacent circuits.
• Accepts AC 110–240V input, suitable for standard commercial building infrastructure.

Lifesafety Power · FPO75-B100C4PD8E4V

Lifesafety Power FPO75-B100C4PD8E4V FPO75-B100C4PD8E4V

75-watt enclosed power supply designed for distributed IP camera and access control deployments where centralized PoE or auxiliary 12V power

• 75W enclosed supply supports distributed IP camera and access control power loads.
• Fits wall-mount, DIN-rail, or cabinet installations for flexible deployment.
• Distributed sourcing reduces voltage drop on long cable runs and isolates circuit loads.

Lifesafety Power · FPO150-B100C8E4M

Lifesafety Power FPO150-B100C8E4M FPO150-B100C8E4M

150-watt regulated power supply from Lifesafety Power