Lifesafety Power

Lifesafety Power

SKU: FPO75/150-C8D8E4S

Lifesafety Power FPO75/150-C8D8E4S FPO75/150-C8D8E4S

• Delivers 225W total across dual 12V and 24V outputs from a single enclosure.
• E4S form factor (24×20×4.5 in) mounts to 19-inch racks or wall surfaces.
• Supports mixed-voltage loads — IP cameras on 12V, access readers on 24V.

Lifesafety Power

SKU: FPO75/150-2C82D8E8M

Lifesafety Power FPO75/150-2C82D8E8M FPO75/150-2C82D8E8M

Lifesafety Power

SKU: FPO250-B1002C82D8E4

Lifesafety Power FPO250-B1002C82D8E4 FPO250-B1002C82D8E4

• 16 independently fused 3A outputs prevent a single fault from cascading across zones.
• Dual-voltage 12V/4A and 24V/8A outputs support mixed-device installations from one enclosure.
• E4 form factor fits standard electrical cabinets without consuming rack space.

Lifesafety Power

SKU: FPO150/250-2D8E8S

Lifesafety Power FPO150/250-2D8E8S FPO150/250-2D8E8S

• Dual 12VDC outputs let you power two independent camera circuits from one unit.
• Eight supervised relay pairs enable remote fault monitoring across eight zones.
• Industrial-grade enclosure suits rack-mount or wall-mount central equipment installs.

Lifesafety Power

SKU: FPO150-B100C8PD8PE4M1

Lifesafety Power FPO150-B100C8PD8PE4M1 FPO150-B100C8PD8PE4M1

• 150W regulated output consolidates power for cameras, readers, and door strikes.
• Eight independently fused channels limit fault propagation across connected devices.
• PD supervision monitors per-channel power delivery for proactive fault detection.

Lifesafety Power

SKU: FPO250/250-2C82D8E8M1

Lifesafety Power FPO250/250-2C82D8E8M1 FPO250/250-2C82D8E8M1

• Dual independent channels isolate faults, preventing one rail failure from cascading.
• 120 VAC input suits standard facility power without step-down transformers.
• 75W total capacity supports distributed camera or access control loads across two zones.

Lifesafety Power

SKU: FPO150-B100C8D8E4M1

Lifesafety Power FPO150-B100C8D8E4M1 FPO150-B100C8D8E4M1

• Delivers 150 W total output capacity to support multi-device security installations.
• Operates on standard 120 VAC input, simplifying integration into existing electrical infrastructure.
• Verify output channels and battery backup specs via Lifesafety Power datasheet before deployment.

Lifesafety Power

SKU: FPO75/150-2C8P2D8PE4M1

Lifesafety Power FPO75/150-2C8P2D8PE4M1 FPO75/150-2C8P2D8PE4M1

• Redundant dual-channel architecture eliminates single points of failure in critical deployments.
• 75W primary / 150W combined output supports parallel load-balancing across multiple device zones.
• Eight isolated power circuits across 2 distribution boards enable flexible per-zone circuit assignment.

Lifesafety Power

SKU: FPV4-D8E1

Lifesafety Power FPV4-D8E1 4A 8 Auxillary Outputs

• 8 independent outputs distribute 4A across circuits, eliminating single-point failure risk.
• Factory-selectable 12VDC or 24VDC output avoids field reconfiguration at install time.
• Remote supervision monitors voltage and load status for early fault detection off-site.

Lifesafety Power

SKU: FPV4-BOXED

Lifesafety Power FPV4-Boxed 4 Amps @ 12V Or 3 Amps @ 24VDC Fai

• Selectable 12VDC @ 4A or 24VDC @ 3A from one unit reduces panel footprint.
• FAI supervision reports power-loss and fault conditions to networked monitoring systems.
• Regulated DC output protects readers, locks, and auxiliary devices from voltage ripple.

Lifesafety Power

SKU: E8M-BOXED

Lifesafety Power E8M-BOXED MCLASS multi-purpose Enclosure E8M-BOX

• Supports up to 12 doors across 12V and 24V rails in a single enclosure.
• Removable backplate enables shop-side pre-wiring, cutting on-site assembly time.
• 16-gauge steel with 6.5" depth fits 12Ah battery packs internally; no external mount.

Lifesafety Power

SKU: E2M-BOXED

Lifesafety Power E2M-BOXED MCLASS Power Enclosure FLEXPOWER E2M

• UL294-listed enclosure supports compliance on regulated access control installations.
• Removable backplate enables shop-level pre-wiring, cutting field labor by 30–40%.
• 4.5" depth integrates battery backup internally—no external extensions required.

Lifesafety Power

SKU: E2-BOXED

Lifesafety Power E2-BOXED Enclosure E2 20x16x4.5 black no bac

• 20"W × 16"H × 4.5"D steel enclosure fits retrofit and space-constrained installs.
• Black powder-coated cold-rolled steel resists corrosion in standard indoor environments.
• Accepts E2-series power supplies, relay cards, and supervision modules in one enclosure.

Lifesafety Power

SKU: RGXM150B-C8D8P

Lifesafety Power RGXM150B-C8D8P 150W power supply 12A/12V or 6A

• Dual-voltage output (12V@12A or 24V@6A) eliminates separate supplies for mixed-voltage installs.
• Eight relay outputs, 3A fused per channel, support failsafe or failsecure door hardware independently.
• Eight Class 2 aux outputs (2.5A each) power readers and sensors across two segmented control buses.

Lifesafety Power

SKU: RBE-BOXED

Lifesafety Power RBE-BOXED Rackmount Battery Enclosure 12VDC 8 Am

• Holds four 12VDC 8A batteries, centralizing backup power in a single rack chassis.
• Independent per-slot management allows battery replacement without taking the system offline.
• 19-inch rackmount form factor consolidates distributed battery storage, reducing cabling runs.

Lifesafety Power

SKU: FPV4-R8E1

Lifesafety Power FPV4-R8E1 4A 8 Lock Outputs

• 4A at 12VDC across 8 relay outputs supports up to eight mag locks independently.
• Per-output fusing and supervision enables granular door-level fault diagnostics.
• 75W, 120VAC input simplifies single-enclosure power management for multi-door installs.

Lifesafety Power

SKU: FPG50-BOXED

Lifesafety Power FPG50-BOXED Power Supply 100-240VAC internati

• Accepts 100–240VAC input, eliminating separate power units across global deployments.
• Selectable 12VDC or 24VDC output at 2A supports both legacy and modern IP camera installs.
• Japan-certified compliance simplifies regulatory approval for Asia-Pacific security projects.

Lifesafety Power

SKU: E6M1-DOOR-PLATE-ONLY

Lifesafety Power E6M1-Door-Plate-Only E6M1-Door-Plate-Only

• Plate-only format lets you reuse existing strike hardware, cutting retrofit costs.
• Designed for E6M1 series integration in single or multi-door access control deployments.
• Mechanical component with no electrical specs; installs with standard tools on any flat frame.

Lifesafety Power

SKU: RS250-M16

Lifesafety Power RS250-M16 150W PS 12A/12V or 6A/24V 8 relay lock

• Delivers 150W at 12A/12V or 6A/24V, scaling to both mag-lock and long-run door hardware.
• Eight relay lock outputs (3A fused each) support mixed failsafe/failsecure modes per door.
• Sixteen 2.5A auxiliary outputs across dual buses enable independent power sequencing per zone.

Lifesafety Power

SKU: RGXM150-C8PZ

Lifesafety Power RGXM150-C8PZ 150W power supply 12A/12V or 6A/24

• Delivers 12A@12VDC or 6A@24VDC from a single 150W supply for mixed lock loads.
• Eight relay outputs at 2.5A each support per-channel failsafe or failsecure selection.
• Class 2 power-limited design eliminates conduit separation from low-voltage signal wiring.