Lifesafety Power FPO150-B100D8PM8NLCE4B 150W Power Supply
Overview
The FPO150-B100D8PM8NLCE4B is a 150W class 2 power-limited supply rated for 12A @ 12V or 6A @ 24V — purpose-built for access control systems, fire alarm panels, and security distribution networks that need multiple regulated outputs without separate power conditioners. It addresses the integration problem: you have a 150W budget and need to supply an access control panel, readers, mag locks, and door strikes from a single enclosure-mounted source.
Compatibility
This unit is designed for Bus1 and Bus2 systems (selectable per output). Confirm compatibility with your specific access control platform — many legacy and current systems support Lifesafety Power supplies via standard 12V/24V and auxiliary distribution. Verify your panel's power-input specifications before ordering; this is not a universal drop-in for all security platforms.
Installation Notes
The FPO150-B100D8PM8NLCE4B delivers 8 DC auxiliary outputs, each class 2 power-limited at 2.5A maximum per output. Each output is individually fused at 3A — this protects against downstream short circuits without sacrificing the entire supply. When sizing loads, account for inrush current on solenoids and mag locks; peak draw on relay coils can exceed steady-state. Wire in accordance with NEC Article 725 (Class 2 circuits) — standard 18 AWG is acceptable for most runs under 100 feet. Test each output with a load meter during commissioning to verify fusing is correct for your mix of readers, locks, and auxiliary devices.
What's in the Box
- 1x FPO150-B100D8PM8NLCE4B power supply unit
