Lifesafety Power FPO150/250-2C8P3D8PE8M Dual Voltage Power Supply
Overview
The FPO150/250-2C8P3D8PE8M is a 400W dual-voltage power supply rated for 120 VAC input. It provides 16 relay lock outputs and 24 auxiliary outputs, making it a control hub for access control systems, gate operators, maglock circuits, and distributed door control in mid-scale commercial installations. This is the supply to reach for when you need managed power distribution across multiple zones without oversizing or running multiple smaller units.
Compatibility
The FPO150/250-2C8P3D8PE8M integrates with Lifesafety Power access control panels and door control systems that require dual-voltage switching and relay-driven lock management. The 16 relay outputs handle strike plates, maglocks, and momentary solenoids; the 24 auxiliary outputs support auxiliary circuits, gate triggers, and status signaling. Verify your panel documentation for relay voltage and current requirements before installation — this unit is designed for standard 12V and 24V DC control circuits common in commercial access systems.
Installation Notes
The FPO150/250-2C8P3D8PE8M requires 120 VAC single-phase input — confirm your facility power before mounting. Relay outputs are rated for standard access-control switching loads; do not exceed relay contact ratings on strike or maglock circuits. Auxiliary outputs support lower-current signaling and status indication. Install in an enclosure with adequate ventilation — 400W dissipation demands airflow to prevent thermal throttling during sustained multi-zone activation. Wire input/output terminals to NEC and local electrical code; use appropriately gauged conductors for load current. Test relay closure on all 16 outputs before commissioning the system.
