Lifesafety Power FPO150/250-2C82D8PE8M3 150W/250W Power Supply

The Lifesafety Power FPO150/250-2C82D8PE8M3 is a dual-output power supply designed for access control and life safety systems. It delivers 150W at 12A/12V or 6A/24V, with selectable failsafe and failsecure operation across 8 relay lock control outputs and 8 DC auxiliary outputs, making it suitable for multi-door access control deployments and emergency egress applications.

Key Features

Dual output rating: 150W at 12A/12V or 6A/24V

8 relay lock control outputs, each fused at 3A and selectable for FAI, failsafe, or failsecure

8 class 2 power-limited DC auxiliary outputs at 2.5A per output, selectable for Bus1 or Bus2

E8 enclosure: 36H × 30W × 6.5D inches

Configurable output assignments for flexible access control configurations

Installers and integrators deploying multi-point access control systems will find this power supply essential for managing electric locks, request-to-exit buttons, and auxiliary sensors across multiple zones. Compatible with Lifesafety Power control panels and third-party access control systems using standard 12V/24V DC lock protocol.

Lifesafety Power FPO150/250-2C8P3D8PE8S 150W power supply 12A/12

Selectable 12VDC/24VDC output delivers 20A or 10A to match your lock load requirements.
Two independent relay outputs support per-door failsafe or failsecure config without external relays.
Three 2.5A auxiliary outputs power readers, REX buttons, or sensors directly from the same module.

$2,485.00 $1,632.99 Save $852.01

Add to Cart

The item has been added

Free shipping over $499

$2,485.00 $1,632.99 Save $852.01

Add to cart Add to quote Compare

Lifesafety Power

SKU: FPO150/250-2D82M8NLCE4

Lifesafety Power FPO150/250-2D82M8NLCE4 150W power supply 12A/12

Selectable 150W/250W capacity supports 12VDC or 24VDC mixed-voltage load deployments.
Eight independently fused 3A outputs prevent cascading failures across cameras and readers.
Field-selectable Bus1/Bus2 per output enables N+1 or parallel redundancy in one enclosure.

$1,936.00 $1,271.99 Save $664.01

Add to Cart

The item has been added

Free shipping over $499

$1,936.00 $1,271.99 Save $664.01

Add to cart Add to quote Compare

Lifesafety Power

SKU: FPO150/250-2M8NLCSD16E8M3

Lifesafety Power FPO150/250-2M8NLCSD16E8M3 150W power supply 12A

Dual-voltage output (12V/24V) supports mixed camera, lock, and reader loads from one unit.
8 individually fused 3A ports eliminate daisy-chained adapters and simplify fault isolation.
Rack, wall, or DIN-rail mountable for flexible deployment in cabinets and closets.

$3,615.00 $2,374.99 Save $1,240.01

Add to Cart

The item has been added

Free shipping over $499

$3,615.00 $2,374.99 Save $1,240.01

Add to cart Add to quote Compare

Lifesafety Power

SKU: FPO150/250-2D8P2M8NLCE8M1

Lifesafety Power FPO150/250-2D8P2M8NLCE8M1 150W power supply 12A

Eight individually fused 2.5A outputs isolate faults without disrupting the full system.
Dual-bus architecture lets you segregate cameras, readers, and auxiliaries on one supply.
Switchable 150W or 250W capacity supports 12VDC or 24VDC per output to match device needs.

$3,217.00 $2,112.99 Save $1,104.01

Add to Cart

The item has been added

Free shipping over $499

$3,217.00 $2,112.99 Save $1,104.01

Add to cart Add to quote Compare

Lifesafety Power

SKU: FPO150/250-B1002C82D8E12M

Lifesafety Power FPO150/250-B1002C82D8E12M 150W power supply 12A

Selectable 150W or 250W mode delivers 12A/20A at 12VDC or 6A/10A at 24VDC.
16 fused outputs (8 relay + 8 aux DC) eliminate external relay modules in mixed-voltage cabinets.
Per-output FAI, failsafe, or failsecure logic controls independent lock behavior per door group.

$5,997.00 $3,938.99 Save $2,058.01

Add to Cart

The item has been added

Free shipping over $499

$5,997.00 $3,938.99 Save $2,058.01

Add to cart Add to quote Compare