Panduit CFX10WH-X Surface Raceway Power-Rated Coupler Fitting
Overview
The Panduit CFX10WH-X is a power-rated surface raceway coupler fitting from the Pan-Way® line, engineered to join sections of LD10 and LDPH10 single-channel surface raceway cleanly and securely. At 1.24 inches in length, it bridges raceway runs without gaps or misalignment, keeping cable pathways continuous and professional-looking in office, commercial, and enterprise environments. If you're extending a raceway run around a corner or across a room and need to connect two duct segments inline, this is the fitting that closes the joint — no tools, no adhesive, no improvised tape fixes.
The CFX10WH-X (often searched as CFX10WH X) is sold in packs of 10, with carton quantities of 50, making it practical to stock for multi-room deployments or ongoing facilities work without ordering one fitting at a time.
Key Features
- Power-Rated Construction (UL94V-0, FT4): The ABS material meets UL94V-0 flame rating and FT4 flame-spread requirements — meaning this fitting is rated for runs that include electrical wiring alongside data and voice cables. If your raceway carries power conductors, you need a fitting with this rating; a generic non-rated coupler isn't code-appropriate for mixed power/data pathways.
- Snap-On Installation: No screws, no adhesive — the CFX10WH-X presses onto mated LD10 or LDPH10 raceway sections and locks in place. On a multi-drop installation with dozens of joints, snap-on fitment cuts installation time noticeably versus screw-fixed alternatives.
- TIA/EIA Standards Compliance: Meets TIA/EIA cabling infrastructure standards, which matters when the installation must pass structured cabling inspection or when the customer's facilities team requires standards-compliant documentation.
- UL Listed: UL Listing means third-party safety verification is on record — relevant for commercial occupancies where the AHJ (Authority Having Jurisdiction) may inspect raceway installations, especially in mixed-use or healthcare environments.
- Compact Profile — 0.93 in. H × 1.62 in. W × 1.24 in. L: The low-profile dimensions (23.6 mm H × 41.1 mm W) keep the raceway run visually consistent along baseboards or walls. Bulky fittings break the clean line of a finished installation; this one stays flush with the duct body.
- White ABS Finish: Matches standard white LD10 and LDPH10 raceway sections directly. Painting or color-matching workarounds add labor; the factory white finish integrates without extra steps in typical commercial interior environments.
- Pan-Way® Series Ecosystem: Part of Panduit's Pan-Way surface raceway family — fittings, elbows, reducers, and end caps are all designed to the same dimensional standard, so you're not mixing and matching components from different systems and hoping tolerances align.
- Pack Quantity of 10: Bundled in 10-piece packs (50-piece cartons) rather than sold individually — practical for project-quantity purchases where you need enough couplers to cover a full floor or building section without per-unit pricing overhead.
Integration & Compatibility
The CFX10WH-X is designed specifically for use with Panduit LD10 and LDPH10 single-channel surface raceway. It is not a universal fitting — verify that your installed raceway is LD10 or LDPH10 before ordering. Competitor cross-references on file include 2306, 2906WH, and TSR3W-14, which may assist if you're retrofitting an existing installation using non-Panduit duct and need to confirm dimensional compatibility.
Within a broader surface raceway and cable management deployment, the CFX10WH-X handles inline straight couplings; for direction changes, reductions, and terminations you'll need the corresponding Pan-Way elbows, reducers, and end caps from the same family. Pairing the full fitting set from the same product line ensures consistent aesthetics and guaranteed dimensional fit across the entire run.
For structured cabling projects where raceway protects network cabling runs to switches, access points, or IP cameras, having standards-compliant (TIA/EIA, UL Listed, UL94V-0) fittings throughout the run supports documentation requirements and keeps inspections straightforward.
Frequently Asked Questions
Q: What raceway channels is the CFX10WH-X compatible with?
A: The CFX10WH-X is designed specifically for use with Panduit LD10 and LDPH10 single-channel surface raceway. It is not rated for other raceway families — confirm your installed duct is LD10 or LDPH10 before ordering.
Q: Is the CFX10WH-X rated for runs that include power wiring?
A: Yes. The fitting is power-rated, made from UL94V-0 and FT4-compliant ABS material, and is UL Listed — appropriate for raceway runs carrying both electrical and data/voice cabling.
Q: Does the CFX10WH-X require tools or adhesive for installation?
A: No. It features snap-on installation — press it onto mated raceway sections and it locks in place without screws, tools, or adhesive.
Q: How many couplers come in a pack, and what is the carton quantity?
A: The CFX10WH-X ships in packs of 10. Carton quantity is 50 pieces.
Q: What are the dimensions of the CFX10WH-X?
A: Overall length is 1.24 in., height is 0.93 in. (23.6 mm), and width is 1.62 in. (41.1 mm).
Q: Does the CFX10WH-X meet any cabling infrastructure standards?
A: Yes. It meets TIA/EIA cabling standards, carries UL Listing, and the ABS material is rated UL94V-0 and FT4 for flame performance.
The CFX10WH-X comes up regularly on commercial interior cabling jobs where the installer needs inline joints on LD10 or LDPH10 raceway and doesn't want to slow down for hardware. The snap-on design and the 1.24-inch compact body keep the joint tight and the profile consistent — the kind of detail that matters when the raceway runs at eye level in a client-facing space.
Technical Highlights:
- UL94V-0 / FT4 Flame Rating: The ABS construction carries both a vertical-burn (UL94V-0) and a FT4 flame-spread rating — this is the spec that legally separates a power-rated fitting from a data-only one. Don't substitute a non-rated coupler on a mixed power/data run.
- TIA/EIA Standards Compliance: Structured cabling inspections in commercial builds often require evidence of standards-compliant fittings throughout the run. Having UL Listed, TIA/EIA-compliant components documented on the bill of materials keeps closeout paperwork clean.
- Pack-of-10 Quantity: At 10 units per pack and 50 per carton, the CFX10WH-X is sized for project purchasing rather than one-off maintenance. On a 20-room office fit-out with multiple raceway joints per room, ordering by the carton eliminates mid-job reorders.
Deployment Considerations:
- Confirm raceway model before ordering — the CFX10WH-X fits LD10 and LDPH10 only. Panduit's Pan-Way line has multiple channel widths and profiles; a fitting from a different subfamily will not seat correctly even if it looks similar.
- This fitting is white from the factory to match standard LD10/LDPH10 raceway. If the installed raceway has been painted or is a non-standard color variant, factor in touch-up or replacement into the finishing scope.
The CFX10WH-X is the right stock item for commercial integrators running Pan-Way LD10 or LDPH10 raceway in office build-outs, AV infrastructure runs, or IP camera cabling projects where the raceway carries mixed power and data — and where a clean, inspectable, standards-documented installation is a contract requirement.
