ELO Touch E264375 DDR4 SODIMM Memory Module

Overview

The ELO Touch E264375 is an 8GB DDR4 SODIMM module rated at 2666MHz — a memory upgrade component for ELO Touch interactive display systems and embedded computing platforms. This is a second-generation (2ND) SODIMM slot upgrade, meaning it installs alongside an existing module to expand total system RAM. Deploying this upgrade is relevant when running multiple VMS client applications, streaming analytics software, or concurrent video processing workflows on an ELO Touch-based workstation, where baseline memory becomes the bottleneck.

Compatibility

The E264375 is designed for ELO Touch interactive displays and systems with DDR4 SODIMM slots supporting 2666MHz operation. Verify your system's motherboard or documentation confirms DDR4 2666MHz SODIMM compatibility before ordering. This module occupies a second SODIMM slot; if your system has only one slot, this upgrade is not applicable. Check the system manual or contact the manufacturer to confirm dual-channel support and maximum supported memory configuration.

Installation Notes

SODIMM installation requires opening the system enclosure and locating the memory slot bay. Power off the system completely and disconnect AC power before handling components. Insert the module at a 45-degree angle into the vacant SODIMM slot, then press down firmly until the retention clips on both ends snap closed — the module should sit flush and parallel to the motherboard. Reseat any loose cables near the slot, close the enclosure, reconnect power, and verify the system recognizes the new total memory capacity in BIOS or system settings. Wear an anti-static wrist strap during installation to prevent electrostatic discharge.