Aiphone JV-1FD Expansion Station
Overview
The Aiphone JV-1FD is a 7-inch expansion station designed to integrate into Aiphone intercom systems where you need additional communication points without adding a full master unit. Built as a secondary station, the JV-1FD operates on 24V DC power and delivers hands-free and push-to-talk audio communication across a networked intercom installation. Surface wall mounting into a standard 3-gang electrical box keeps installation straightforward in retrofit and new-build access control deployments.
Key Features
- 7-inch TFT LCD display (WVGA resolution): Provides clear status indication and operator interface for incoming calls and system alerts—large enough to read from 3–4 feet away without eye strain during shift work, but compact enough to fit tight corridors or reception areas.
- Hands-free and push-to-talk operation: Flex between full duplex hands-free communication (ideal for busy staff who need both hands free) and push-to-talk (push-and-speak mode) depending on your site noise floor and operational preference.
- Dual dry-contact outputs (N/O 24V AC/DC, 1A each): Door release and option output ports allow the JV-1FD to trigger an electric strike or access control relay—one amp capacity is typical for standard mag locks and solenoid bolts, but verify your lock's inrush current if it's an older high-draw model.
- Low power draw (100 mA standby, 780 mA max): Standby consumption is minimal, so the JV-1FD won't strain your 24V DC supply even when wired in parallel with multiple expansion stations or a video intercom master—important when you're running off a single power supply for a distributed system.
- Flame-resistant polycarbonate + ABS enclosure: Meets building code flammability standards for indoor mounting in commercial and institutional settings—relevant if your facility has strict fire-rating requirements or is subject to ADA compliance audits.
- Operating temperature range 32–140°F (0–40°C): Suitable for climate-controlled indoor spaces (lobbies, offices, secure corridors). Not rated for outdoor or unheated loading dock environments—if you need an outdoor expansion station, consult a different form factor.
Integration & Compatibility
The JV-1FD is an expansion station within the Aiphone JV product line, meaning it connects to a JV-series master unit or gateway. Confirm your existing master unit supports expansion-station architecture before ordering—mixing incompatible intercom generations can require bridge equipment or full system replacement. Power is supplied via the included 24V DC source (PS-2420UL), and both door-release and option-output relays use simple N/O dry contacts, making integration with standard access control panels, electric strikes, and auxiliary devices straightforward.
Physical & Environmental
The station measures 5-1/8" H × 9-1/16" W × 13/16" D and weighs 1.17 lbs, fitting neatly into a standard 3-gang wall box. White finish blends into most commercial interiors. No protective hood or weather sealing—surface mount only, indoors.
Frequently Asked Questions
Q: What power supply does the JV-1FD require?
A: The JV-1FD runs on 24V DC supplied by an Aiphone PS-2420UL power supply. In multi-station setups, verify total current draw (100 mA standby per unit, up to 780 mA per unit under full operation) does not exceed your supply's rated capacity.
Q: Can the JV-1FD release a door lock directly?
A: Yes. The door release output is rated N/O 24V AC/DC at 1A, sufficient for standard solenoid strikes and mag locks. If your lock draws more than 1A at startup, you'll need an external relay or power supply boost.
Q: Is the JV-1FD suitable for outdoor mounting?
A: No. Operating temperature range is 32–140°F and there is no IP rating for weather resistance. Outdoor and semi-outdoor deployments require a different Aiphone product line.
Q: What is the warranty on the JV-1FD?
A: Refer to your Aiphone warranty documentation or contact your systems integrator—standard commercial intercom products carry manufacturer warranty, terms vary by region and distribution channel.
Q: Can I use the JV-1FD as a standalone unit?
A: No. The JV-1FD is an expansion station and requires a JV-series master unit or gateway to function—it cannot operate independently.
The Aiphone JV-1FD expansion station is the right fit when you're scaling out an existing Aiphone intercom system and need additional talk-down points without doubling your infrastructure. The 7-inch WVGA display is large enough to see status at a distance, and the dual 1A relay outputs give you enough throw to drive a standard mag lock or solenoid strike—100 mA standby draw means you won't strain a shared 24V supply serving multiple JV-1FD units across your facility.
Technical Highlights:
- Dual 1A N/O outputs: Door release and option output relays rated N/O 24V AC/DC at 1A each—standard for solenoid strikes and single-band mag locks. Verify your lock's peak inrush current; older high-draw models may require an external relay or stepped supply.
- Low standby draw (100 mA), high utilization peak (780 mA): In a distributed multi-station deployment, standby consumption is negligible, but peak load during active audio transmission will climb. Size your 24V DC supply for the worst case: all stations talking simultaneously.
- Hands-free + push-to-talk dual mode: Hands-free is natural for busy staff; push-to-talk suits noisy environments. Switch mode in system configuration—no hardware change needed.
Deployment Considerations:
- The JV-1FD is an expansion unit only—it requires a JV-series master or gateway to initialize and receive calls. Do not spec this as a standalone lobby station; pair it with a matching Aiphone master architecture.
- No weatherproofing or outdoor rating—surface mount indoors only. Outdoor access points demand a different Aiphone form factor.
Best fit: multi-floor office buildings, secure facilities, or institutional campuses where you need distributed talk-down stations tied to a central master, and where the 7-inch display and relay outputs integrate neatly into existing access control relay schedules.
