Aiphone JP-DVF Flush Mount Color Vandal Door Station
Overview
The Aiphone JP-DVF is a flush-mounted color door station built for commercial entry points where you need a compact, durable visitor interface paired with continuous monitoring. This is a hands-free, two-conductor wired unit sourced from the JP Series master system—purpose-built for facilities that prioritize simplicity over network complexity. The stainless steel faceplate resists corrosion and intentional damage, and the wide 170° camera angle captures full entryway context without optical distortion.
Key Features
- Wide 170° Camera Angle: The CMOS sensor delivers approximately 100° horizontal by 170° diagonal viewing—enough to see both visitor and door hardware in a single frame, eliminating the need for multiple cameras at narrow entry points.
- 1/4" CMOS Sensor with 5 Lux Minimum Illumination: Captures usable color video in dimly lit vestibules and covered entries without requiring external lighting. Ideal for indoor lobbies, stairwells, and shaded alcoves where natural light is inconsistent.
- Digital Pan, Tilt, and Zoom: Master station can reframe the view without moving the door station hardware—critical when the installed angle doesn't initially match your security priorities.
- Hands-Free Open Voice Auto-Voice Actuation: Two-way audio activates automatically when visitor presses the call button, eliminating the need for staff to manually answer. Reduces missed calls and speeds entry screening for high-traffic facilities.
- Flush or Surface Mounting: Fits recessed into a wall cavity (included back box) or mounts directly onto the surface with the optional SBX-DVF surface box. Allows retrofit into existing door frames without significant structural work.
- 330-Foot Wiring Run (18 AWG) or 165 Feet (22 AWG): Two-conductor, low-capacitance non-shielded cable means you can locate the JP-DVF far from the master station without active repeaters. Practical for multi-building campuses or large warehouse facilities where pulling Cat5e would be overengineered.
- Stainless Steel Vandal-Resistant Faceplate: Resists corrosion in coastal or wet environments and withstands deliberate strikes from tools or blunt objects. Rated for -4°F to 140°F, suitable for unheated loading docks and outdoor awnings.
- Compact Dimensions (8-1/4" H × 5-5/16" W): Fits standard 2×4 wall cavities and doesn't protrude into doorways. Weighs only 1.26 lbs, so installation on drywall studs requires no additional blocking.
Integration & Compatibility
The JP-DVF is a slave station within the Aiphone JP Series intercom system—it does not operate standalone. Power and signal are supplied from a JP Series master unit (JP-1MD, JP-2MD, JP-4MD, or equivalent). The two-conductor wiring carries both audio and control signals, so you do not need PoE, network switches, or VMS software. This architecture is ideal for facilities already running JP Series installations and for organizations avoiding IT infrastructure dependencies.
Environmental and Durability Ratings
Operating temperature range of -4°F to 140°F (-20°C to 60°C) permits outdoor use under eaves or in unheated vestibules. The stainless steel enclosure is inherently corrosion-resistant and meets vandal expectations for high-traffic public entries. No separate weatherproofing gasket is mentioned in the specifications, so avoid fully exposed outdoor mounting without additional protective housing.
Power and Installation Notes
Power is drawn entirely from the connected JP Series master station via the two-conductor wire—no local 24VAC transformer or PoE injector is required. Use Aiphone part #871802 (low-capacitance, non-shielded 2-conductor cable). Wire distance calculations are straightforward: 165 feet maximum with 22 AWG wire, or up to 330 feet with 18 AWG wire. Flush mounting requires a standard electrical back box; surface mounting uses the SBX-DVF bracket (sold separately).
What's in the Box
No specific package contents are detailed in the manufacturer's technical documentation. Contact the distributor or refer to the product shipment documentation for a complete list of included mounting hardware, gaskets, and cable termination blocks.
Frequently Asked Questions
Q: Can the JP-DVF be mounted outdoors without a protective enclosure?
A: The stainless steel faceplate is corrosion-resistant and the operating temperature range supports outdoor use under cover. However, the specifications do not reference an IP66 or IP67 rating, so full rain exposure or direct spraying is not recommended. Use under eaves, covered entries, or with an additional protective hood.
Q: What is the maximum distance I can run from the JP Series master to the JP-DVF?
A: Maximum wiring distance is 165 feet using 22 AWG cable or 330 feet using 18 AWG cable. Use Aiphone part #871802 (low-capacitance, non-shielded 2-conductor) to avoid signal degradation.
Q: Does the JP-DVF require PoE or a separate power supply?
A: No. The JP-DVF is powered entirely by the JP Series master station through the two-conductor wire. No external power supply, PoE injector, or network connection is required.
Q: Can I control the camera zoom and pan from the master station?
A: Yes. The JP-DVF supports digital pan, tilt, and zoom controlled from the connected JP Series master, allowing you to reframe the view without repositioning the door station hardware.
Q: What is the minimum light level the JP-DVF camera needs to produce color video?
A: The CMOS sensor is rated for 5 lux minimum illumination, which is typical for dimly lit indoor spaces (stairwells, covered lobbies, interior vestibules). Below 5 lux, image quality degrades; the camera does not have built-in infrared, so low-light performance is limited to available ambient light.
Q: Does the JP-DVF integrate with modern VMS software like Milestone or Axis Camera Station?
A: No. The JP-DVF is an analog/proprietary two-wire intercom station designed for standalone JP Series systems. It does not support ONVIF, network video, or third-party VMS platforms. Integration is limited to other Aiphone JP Series components.
The Aiphone JP-DVF is a straightforward choice when you're retrofitting a facility into an existing JP Series intercom backbone and you need color video at the door without introducing network complexity. The 170° camera angle and 5 lux sensitivity will handle most indoor vestibules and covered entries, and the two-conductor wiring—capable of running 330 feet on 18 AWG—makes it practical for sprawling commercial campuses or warehouse facilities where pulling fresh Ethernet would be overkill.
Technical Highlights:
- 1/4" CMOS Sensor, 5 Lux Minimum: Delivers usable color at typical indoor light levels (lobby, stairwell, covered entry). No infrared, so twilight or unlit outdoor areas will show degraded or dark frames. This is a deliberate design choice—the JP-DVF prioritizes simplicity and long wire runs over low-light automation.
- 170° Diagonal Viewing Angle with Digital Pan/Tilt/Zoom: Wide capture without optical distortion means a single door station handles most entry scenarios. The digital reframing from the master station is a practical workaround if your initial mounting angle misses the visitor's face or the door lock.
- Two-Conductor, 330-Foot Wiring Reach (18 AWG): This is the JP-DVF's biggest differentiator. Most modern IP door stations demand PoE and Cat5e/6. If your master station is 500+ feet away or you're avoiding network infrastructure, the two-wire topology and distance capability become a deciding factor. Use Aiphone #871802 cable specifically—non-shielded, low-capacitance design ensures clean audio and video over extended runs.
Deployment Considerations:
- No IP rating specified in the technical data. The stainless steel faceplate resists corrosion and casual vandalism, but full rain exposure or hose-down environments require additional protective housing. Plan for covered entries or eaves-only mounting.
- Hands-free auto-voice actuation is a convenience feature, but it means staff cannot screen calls silently before audio activates. In security-sensitive deployments (executive offices, server rooms), confirm that automatic speaker activation aligns with your screening workflow.
- The JP-DVF is proprietary to the JP Series intercom ecosystem. If your facility later adopts ONVIF, Milestone, or cloud-based access control, this door station cannot be integrated without replacing the entire system. Lock-in is real—plan accordingly for long-term expansion.
Best suited for multi-building campuses, warehouse distribution centers, and industrial facilities where you've already invested in JP Series infrastructure and you need color entry documentation without introducing network dependencies. Skip this model if you require integrated analytics, low-light performance, or future interoperability with modern VMS platforms.
