APC by Schneider Electric PDM3460IEC309-200 IT Power Distribution Input Module
Overview
The APC by Schneider Electric PDM3460IEC309-200 is a three-pole power distribution input module engineered for high-density IT rack environments where reliable, structured power delivery at 60A is non-negotiable. Designed to slot into APC's modular PDU chassis, this unit accepts a 220V AC input via an IEC 309 60A 3P+PE connector and delivers 208V AC output — purpose-built for data centers, server rooms, and large-scale AV/IT infrastructure builds that demand clean, organized high-current power paths without custom wiring. For integrators working across the APC by Schneider Electric power portfolio, this module extends scalable power distribution into cabinets already running the Modular PDU platform.
Key Features
- 220V AC Input, 208V AC Output: The 220V-in / 208V-out configuration is typical for facilities fed from a 3-phase distribution panel — this module bridges that facility voltage to IT equipment rated for 208V, eliminating the need for a separate step-down transformer and the added failure point it represents.
- 60A per Phase via IEC 309 3P+PE: The IEC 309 industrial connector standard locks under load and resists accidental disconnection — a meaningful advantage over standard NEMA plugs in environments where vibration, cable movement, or dense rack populations are factors. At 60A, this module supports substantial server, storage, or broadcast equipment loads on a single feed.
- Modular PDU Chassis Compatibility: This module is designed for integration into APC's modular PDU ecosystem, meaning you can combine input, output, and metered modules in a single chassis rather than daisy-chaining discrete PDUs. The result is fewer cable runs, fewer potential fault points, and a cleaner audit trail for power circuit documentation.
- 3-Pole Configuration (3P+PE): The three-pole plus protective earth wiring configuration supports balanced three-phase loads — a requirement when distributing power across multiple equipment phases in a rack row or across adjacent cabinets in a high-availability rack power management design.
- Compact Form Factor — 5 in H × 17.5 in W × 16 in D: At 3.50 lb and sized to fit standard 19-inch rack profiles, this module adds minimal overhead to your rack's weight budget and doesn't require reconfiguring adjacent equipment clearances.
- 1-Year Limited Warranty: Backed by APC's manufacturer warranty, providing a documented warranty baseline for facility and project close-out documentation.
Integration & Compatibility
The PDM3460IEC309-200 (often searched as PDM3460IEC309 200) is designed exclusively for use with APC's Modular PDU chassis platform — it is not a standalone PDU and will not function outside that infrastructure. Before specifying this module, confirm the chassis model and input capacity in your rack design; the 60A IEC 309 feed requires a matching breaker and panel circuit provisioned at the facility level. Output voltage of 208V AC must match the input specifications of downstream IT equipment — verify server and storage PSU input ranges (most modern enterprise PSUs accept 100–240V, but confirm before commissioning). For installations integrating with broader data center infrastructure, pair this with APC's metered or switched output modules in the same chassis to gain per-outlet monitoring without adding a separate PDU layer.
Frequently Asked Questions
Q: What input connector does the PDM3460IEC309-200 require?
A: The PDM3460IEC309-200 requires an IEC 309 60A 3-pole plus protective earth (3P+PE) connector at 220V AC. This is an industrial locking connector — ensure your upstream panel and whip cable are provisioned to match before installation.
Q: Is the PDM3460IEC309-200 a standalone PDU?
A: No. The PDM3460IEC309-200 is an input module designed for integration into APC's Modular PDU chassis. It cannot operate independently — a compatible APC Modular PDU chassis is required.
Q: What output voltage does the PDM3460IEC309-200 deliver?
A: The PDM3460IEC309-200 outputs 208V AC. Confirm that downstream IT equipment PSUs are rated to accept 208V input before energizing the circuit.
Q: What is the warranty on the PDM3460IEC309-200?
A: APC covers the PDM3460IEC309-200 under a 1-year limited manufacturer warranty.
Q: What is the maximum current capacity of the PDM3460IEC309-200?
A: The PDM3460IEC309-200 is rated at 60A per phase via its IEC 309 3P+PE input connector.
Q: What are the physical dimensions and weight of the PDM3460IEC309-200?
A: The module measures 5 in (H) × 17.5 in (W) × 16 in (D) and weighs 3.50 lb, making it compatible with standard 19-inch rack profiles.
The PDM3460IEC309-200 earns its place in high-density deployments specifically because of its 60A IEC 309 3P+PE input rating — that locking industrial connector is what separates this module from solutions that use standard plugs on high-current circuits where accidental disconnection under load is a real operational risk. I recommend specifying this module when you're provisioning new rack rows in facilities that already have 3-phase 220V distribution infrastructure in place.
Technical Highlights:
- 220V In / 208V Out: This voltage translation is exactly what you need when facility power is 220V 3-phase but your server and storage equipment is spec'd for 208V — no external transformer required, which removes a component, a heat source, and a maintenance item from the rack design.
- IEC 309 60A Locking Input: At 60A, this is a serious power feed capable of supporting a fully populated high-density compute chassis. The IEC 309 format locks mechanically under load — unlike twist-lock NEMA variants, it won't back out from cable tension or vibration in busy data hall environments.
- 5 in × 17.5 in × 16 in, 3.50 lb: The module's footprint fits cleanly within standard 19-inch rack clearances without requiring adjacent equipment to be repositioned. At 3.50 lb, it won't meaningfully affect rack weight calculations for seismic or floor-load planning.
Deployment Considerations:
- The PDM3460IEC309-200 is a chassis-dependent module — verify your APC Modular PDU chassis model and confirm input slot compatibility before ordering. Installing an incompatible input module in the wrong chassis generation is a common procurement error on fast-track deployments.
- The 208V output requires downstream equipment to accept 208V input. Most modern enterprise server PSUs are auto-ranging (100–240V), but older storage or specialty equipment may be hard-wired for a specific voltage — audit the load list before energizing.
This module is the right specification for greenfield data center rack rows or high-density broadcast/media infrastructure builds where a facility electrician is already running 60A 3-phase circuits to the rack positions and you need a clean, documented modular power input without improvised wiring solutions.
