Panduit EV14-10FB-Q StrongHold Insulated Fork Terminal

The Panduit EV14-10FB-Q is a vinyl-insulated fork terminal designed for 16-14 AWG stranded copper wire terminating to #10 (M5) screw studs. Part of Panduit's StrongHold line, this UL 587H-listed connector delivers reliable, code-compliant connections for security panel power feeds, access control door strikes, UPS battery banks, and low-voltage infrastructure. The fork tongue design allows installers to land wires without fully removing terminal screws—cutting connection time and simplifying service calls. Each terminal features a color-coded blue vinyl barrel for instant wire-gauge identification and a zinc-plated brass tongue for corrosion resistance in plenum, outdoor-rated enclosures, and high-humidity environments. Packaged 25 per bag, 250 per carton for high-volume panel builds and retrofit projects.

Key Features

• Open-Fork Design — Land or remove wires without backing out terminal screws completely; ideal for crowded terminal strips in power supplies and battery back-boxes where access is limited
• 16-14 AWG Range — Accommodates #16 and #14 stranded copper conductors commonly used for 12/24 VDC security circuits, door hardware power, and fire-alarm notification appliances
• UL 587H & CSA Certified — Meets flammability and mechanical-strength requirements for electrical connectors; accepted by inspectors for commercial fire-alarm and security-panel installations governed by NFPA 72 and NEC Article 760
• Vinyl Insulation to the Barrel Crimp — Full-coverage blue insulation prevents accidental shorts in tightly packed enclosures and protects against 600V transients during lightning-induced surges on outdoor strike or magnetic-lock runs
• Zinc-Plated Brass Tongue — Resists tarnish and galvanic corrosion when mating with tin-plated or brass terminal blocks; maintains low contact resistance over years of thermal cycling in uninsulated equipment rooms
• Panduit Crimper Compatibility — Specified for use with CT-100A, CT-160, CT-260, CT-200, CT-1550, CT-1551, and CT-2500 series hand and battery-powered crimping tools; pre-indent barrel ensures 360° compression and pull-test reliability exceeding 35 lbs per UL 486A-486B guidelines
• Bulk Contractor Packaging — 25-piece bags fit in tool pouches and service trucks; 250-piece carton pricing reduces cost-per-termination on campus-wide access-control retrofits and multi-building video-surveillance power installations

StrongHold fork terminals use a funnel-entry barrel and color-coded vinyl sleeve to streamline high-volume termination work. The #10 stud hole (0.203" nominal) provides clearance for standard 10-32 or M5 binding posts found on Altronix, Securitron, and Bosch power-supply terminal blocks, as well as UPS battery lugs and disconnect-switch load terminals. The 0.92" overall length and 0.34" fork width keep the terminated assembly compact—critical when stacking multiple circuits on a single DIN-rail block or landing fail-secure mag-lock and request-to-exit circuits side-by-side in shallow back-boxes. Installers crimp the terminal using a ratcheting hand tool or battery hydraulic crimper with a blue (16-14 AWG) nest; the pre-indent barrel collapses evenly around stranded conductors to create a gas-tight connection that meets the 35-50 lb pull-force thresholds required by UL 486A and CSA C22.2 electrical-connector standards. The zinc-plated tongue resists oxidation in outdoor-rated NEMA 3R/4X enclosures housing PoE midspans, fiber converters, or analogue-to-IP encoder power bricks, and the vinyl insulation remains pliable from -40°F to +221°F, covering the full temperature range of rooftop camera housings and below-grade parking-structure access panels.

Security and low-voltage contractors deploy Panduit EV14-10FB-Q terminals across a range of 12 VDC and 24 VDC applications: power distribution from Altronix or Razberi PoE switches to non-PoE door controllers; battery-negative and battery-positive connections inside fire-alarm and intrusion-panel cabinets; circuit landing on Securitron or Rutherford Controls power-transfer relays; and field-wiring terminations for electromagnetic locks, electric strikes, gate operators, and strobe/horn notification appliances. The fork form factor is especially valued in maintenance and troubleshooting scenarios—technicians can verify circuit voltage by loosening (not removing) the terminal screw, lifting the fork off the stud, and inserting a multimeter probe, then re-landing the connection in seconds without re-stripping wire or hunting for a replacement terminal. On large projects—hospital access-control upgrades, K-12 campus-wide lockdown retrofits, or multi-tenant office build-outs—the 250-piece carton quantity and color-coded 16-14 AWG designation reduce bin clutter and installer error; blue terminals stock alongside yellow (12-10 AWG) and red (22-18 AWG) counterparts in mobile work carts, ensuring crews grab the correct size for #16 door-position-switch homeruns versus #12 magnetic-lock feeders. The UL 587H flammability rating certifies that the vinyl compound is self-extinguishing and low-smoke, satisfying fire-marshal requirements for plenum-adjacent electrical enclosures and above-ceiling junction boxes in schools, hospitals, and high-rise office buildings.

UL 587H and CSA LR31212 certification confirms that every lot of EV14-10FB-Q terminals has passed pull-test, dielectric-withstand, and flammability validation, giving integrators the documentation needed to close out municipal electrical inspections and satisfy general-contractor quality-assurance submittals. Panduit manufactures StrongHold terminals in ISO 9001-registered facilities with lot traceability and ships them in moisture-barrier bags to prevent pre-installation corrosion; the 25-piece retail pack suits service vans and small jobs, while the 250-piece carton offers per-terminal savings on design-build security projects where hundreds of door-hardware circuits, intercom stations, and elevator-control interfaces require field termination. For commercial security integrators running mixed 16 AWG (typical for 12 VDC strikes and PIRs) and 14 AWG (common for 24 VDC mag-locks and long PoE injector runs) circuits, this single SKU covers both gauges and eliminates the inventory complexity of stocking separate part numbers—streamlining truck stock, job-site material staging, and warranty-service call preparation.