Panduit EV14-8FB-Q StrongHold Fork Terminal

The Panduit EV14-8FB-Q StrongHold fork terminal delivers field-proven reliability for 16-14 AWG wire terminations in commercial security, access control, and low-voltage power installations. The fork design eliminates the need to fully disconnect mounting hardware during installation or service calls—loosen the screw, slide the terminal on, retighten. UL 587-H listed and CSA certified for code compliance in the US and Canada. Blue vinyl insulation provides wire-gauge identification at a glance and prevents accidental shorts in crowded j-boxes and panels. Compatible with Panduit's CT-series crimp tools for gas-tight connections that meet torque specs without cold joints or strand damage.

Key Features

• Fork spade design for no-disconnect installation—service panels without fully removing screws
• UL 587-H listed (E52164) and CSA LR31212 certified for NEC/CEC compliance
• 16-14 AWG wire range accommodates common low-voltage and power wiring
• #8 screw size (M4 metric equivalent) fits standard terminal blocks and panel lugs
• Blue vinyl insulation—color-coded to AWG gauge per industry standard
• Tin-plated copper barrel and fork for corrosion resistance and low contact resistance
• Compatible with Panduit CT-100A, CT-160, CT-260, CT-600-A, CT-1550, CT-2500 crimp tools
• 25 terminals per package, 250 per carton for volume installs

The EV14-8FB-Q uses a funnel-entry barrel that guides stranded wire into the crimp zone without fraying, a detail that matters when you're terminating 18/2 for door strikes or 16/2 for magnetic locks in tight enclosures. The vinyl insulation is flame-rated to UL 587-H and extends close to the fork opening, minimizing exposed metal while preserving clearance for the screw head. The fork opening measures 0.31" (7.9 mm) to accommodate #8 screws with standard washers; the 0.9" overall length provides enough standoff to prevent wire strain at the crimp point when bent 90° in shallow back-boxes. The tin-plated finish creates a gas-tight seal that prevents oxidation and voltage drop over 10+ year service life, and resists the galvanic corrosion common in mixed-metal terminal strips.

These terminals see heavy use in access control panels (power/aux outputs), intrusion panels (bell circuits, NAC loops), and intercom/door-station installations where you're landing 16 AWG or 14 AWG stranded from large spools. The fork form factor is faster than ring terminals when you're troubleshooting a field issue—loosen one screw, swap the wire, retighten, no need to track a loose screw or nut in a live panel. The blue color coding matches the industry standard for 16-14 AWG, so inspectors and service techs can verify gauge compliance without a wire stripper or calipers. The 25-piece count is sized for small projects (single door, single panel); order by the carton (250 ct) for multi-floor rollouts or integration jobs with 20+ doors. UL and CSA marks satisfy AHJ requirements in all 50 states and Canadian provinces.

Panduit's StrongHold terminal line competes directly with 3M Scotchlok and Thomas & Betts Sta-Kon on agency listings and crimp-tool compatibility, but the funnel-entry barrel design and tighter vinyl-to-metal tolerance reduce installer error on the first crimp. UL 587-H certification covers the assembly (barrel + insulation + fork), not just the copper blank, which matters during plan review if the AHJ challenges your termination method. The fork geometry meets NECA/BICSI torque specs without requiring a second crimp or solder reinforcement. For integrators running Panduit wire management (duct, j-hooks, D-rings) and crimp tools, the EV14-8FB-Q keeps your termination hardware in the same ecosystem—one vendor for takeoff, one support contact for warranty claims, one line item on the pull list.