i-PRO NVR-RL-2-100TB-V7 Tower NVR Server

Overview

The i-PRO NVR-RL-2-100TB-V7 is a fully configured tower NVR preloaded with VideoInsight Server Edition software. This is a plug-and-play unit meant for immediate deployment in security operations where you need reliable storage and processing without custom builds. It arrives fully tested with Windows 11 PRO, VI Server Activation included, and ready for network integration — no additional configuration required before pressing power.

The NVR-RL-2-100TB-V7 addresses the common integration pain point: sourcing a dedicated recorder that combines adequate processing headroom, sufficient storage for sustained multi-camera recording, and verified software licensing in one sealed unit. The 100TB usable storage handles 24/7 video retention across a moderate camera fleet; the Intel Xeon 8-core processor and 64GB RAM provide the CPU and memory overhead needed to avoid frame drops or analytics bottlenecks in real-world deployments.

Compatibility

This unit is factory-paired with VideoInsight Server Edition and supports standard ONVIF-compliant network cameras via 1Gbps BASE-T network input (dual 1GB ports). It is compatible with any ONVIF Profile S-compliant camera — Axis, Hikvision, Hanwha, Dahua, and other mainstream IP camera lines can be integrated without special firmware or adapters. The on-board Intel graphics card and dual video outputs (2x DisplayPort, 1x HDMI) allow independent monitor configuration for live view, playback, or administrative dashboards.

Installation Notes

Physical footprint: 13.4" (H) × 3.6" (W) × 11.7" (D); weight 12 lbs. Designed for rack placement or secure shelf mounting in a control room or server closet. The single 260W fixed power supply is rated for 150–250 Mbps recording rate under typical deployment loads — verify your total camera bandwidth before connecting to avoid power saturation. Storage is expandable via one 3.5" enterprise HDD bay (no RAID) for OS and additional capacity; rear drive slots, if supported, are special-order and require vendor coordination. Network connections use standard RJ-45 jacks; no special cabling required. TPM 2.0 and on-board encryption support secure boot and credential storage for multi-user environments.