i-PRO B-MD-GB Mini Dome Gang Box Adapter

i-PRO B-MD-GB Mini Dome Gang Box Adapter

Overview

The B-MD-GB is a mechanical mounting adapter that bridges i-PRO mini dome cameras to standard electrical wall gang boxes. This solves a common installation constraint: existing buildings often have pre-mounted electrical boxes at fixed locations, but camera threaded mounts don't align with box screw holes or footprints. The adapter converts the gang box into a camera-compatible mount surface, allowing you to use existing infrastructure without drilling new holes or relocating boxes. Result: cleaner aesthetics, faster deployment, and code-compliant wall installations without structural modification.

Compatibility

Designed for i-PRO mini dome camera models. Confirm your specific camera model's mounting thread size and gang box type (single or dual gang, US or regional variants) against the adapter's specs before ordering — gang box electrical standards vary by region and building code. Verify the camera's threaded mount interface matches the adapter's receptacle. If you are unsure, consult the camera's documentation or your local integrator for gang box compatibility confirmation.

Installation Notes

Mount the adapter to a standard electrical gang box using standard box screws (not supplied with the adapter). Secure the gang box firmly to wall studs or solid backing — a loose box creates vibration and camera drift that degrades image stability and wastes storage on unnecessary motion. For outdoor installations, apply weatherproof caulk around the perimeter of the gang box to maintain the IP66 environmental rating of the camera itself. Power and network cables route independently to the camera — the adapter is a mechanical interface only and carries no electrical connections.

What's in the Box

• 1x B-MD-GB mounting adapter bracket