HPE Proliant Compute DL360 GEN12 6507P 8C 1P 2X32GB-R 8SFF MR408I-O 2X480GB SSD - P89998-005

HPE P89998-005 ProLiant DL360 Gen12 1U Rack Server

Overview

The HPE P89998-005 is a 1U rack-mount server in the ProLiant DL360 Gen12 series, configured with a single Intel Xeon 6507P 8-core processor running at 3.50 GHz, 64 GB of DDR5 memory (2x32 GB at 6400 MT/s), and 2x480 GB SATA SSDs. It targets general-purpose compute workloads where density, redundant power, and a validated HPE platform matter more than maximum core count — fitting for lightweight virtualization, edge compute, or infrastructure roles in space-constrained racks.

Compatibility

This unit is part of the HPE ProLiant DL360 Gen12 family, a 1U rack server platform built on the LGA 4710 socket (Intel Xeon 6 series). The HPE MR408i-o Gen11 OCP storage controller and HPE NS204i-u v2 NVMe boot device are integrated into this configuration. Expansion is supported via up to 3 PCIe Gen5 x16 slots and 2 OCP 3.0 slots, enabling addition of network adapters or accelerators within the platform's validated options list. The included Broadcom BCM5719 quad-port 1GbE OCP3 adapter handles baseline network connectivity. Memory expansion follows DDR5 DIMM standards within the DL360 Gen12 validated memory matrix.

Installation Notes

The unit ships at 67.70 lb — plan for two-person rack installation. Chassis dimensions are 24.00 x 38.50 x 9.00 in (L x W x H), occupying 1U of rack space. The dual HPE 1000W Flex Slot Titanium Hot Plug power supplies support redundant power delivery; verify your PDU can deliver adequate amperage for both feeds. Five standard hot-swap fans are included. UEFI Secure Boot, Secure Start, and Immutable Silicon Root of Trust are pre-configured security features that may require coordination with your security policy before deployment. Intel SGX support is present but must be enabled via BIOS if required by workloads. The 8 SFF drive bays accommodate the installed SSDs with room for additional drives depending on backplane configuration.