HPE DL380 GEN11 8SFF OROC1/2 X2 CBL KIT - P48829-B21

HPE P48829-B21 DL380 Gen11 8SFF OROC Dual Cable Kit

Overview

The P48829-B21 is a dual-cable kit designed to connect OCP Mezzanine (OROC1 and OROC2) slots in HPE ProLiant DL380 Gen11 servers configured with the 8 Small Form Factor (8SFF) drive bay option. If you are expanding or replacing internal cabling to support dual OCP network adapter installations in this chassis, this kit supplies the correct factory-matched cable set. Ordering the wrong cable assembly for Gen11 OROC configurations results in unseated connectors or missing the second OCP slot entirely — P48829-B21 addresses both paths in a single kit.

Compatibility

Designed specifically for the HPE ProLiant DL380 Gen11 platform in the 8SFF (Small Form Factor) drive configuration. Compatible with OROC1 (OCP Mezzanine Slot 1) and OROC2 (OCP Mezzanine Slot 2) on that chassis. This kit is not interchangeable with DL380 Gen10 or Gen10 Plus cable assemblies, nor with LFF (Large Form Factor) drive bay variants of the Gen11 chassis — verify your chassis subtype before ordering. For related server cable and accessory kits, confirm the chassis generation and drive bay count from the server's QuickSpecs before procurement.

Installation Notes

Weighing 0.60 lb, the kit ships ready for direct installation by a qualified data center technician. Route each cable to its designated OROC slot per the DL380 Gen11 maintenance and service guide — connector orientation and locking tab engagement are critical to prevent signal integrity issues at the OCP interface. No additional hardware is included; ensure the OCP adapters are already seated before connecting. Review HPE's Gen11 internal cable routing guide to avoid pinch points near the fan zone.