HPE P39366-291 ProLiant DL365 Gen10+ 1U Rack Server

Overview

The HPE ProLiant DL365 Gen10+ (P39366-291) is a 1U single-processor rack server built around the AMD EPYC 7262 processor with 32GB of DDR4 memory and eight small form factor (SFF) drive bays. At 55.97 lb, this is a fully populated, production-ready chassis suited to compute-dense rack environments where floor-space efficiency matters. The DL365 Gen10+ platform is purpose-built for workloads that benefit from AMD EPYC's high core density and memory bandwidth — making it a natural fit for virtualization hosts, edge analytics nodes, and storage-adjacent compute tiers in rack server deployments.

Key Features

• AMD EPYC 7262 Processor: The 7262 is an 8-core, 16-thread EPYC processor with a 3.2 GHz base clock. Eight physical cores handle parallel workloads — VM hosting, containerized microservices, or edge inference tasks — without the licensing overhead that scales with core count on some software stacks.
• 32GB DDR4 Memory (1P Configuration): Ships with 32GB installed in a single-processor configuration. The DL365 Gen10+ platform supports significant memory expansion, so this baseline config leaves headroom to scale RAM as workload demands grow — without replacing the server.
• 8x SFF Drive Bays: Eight small form factor bays support a range of SAS/SATA SSD and HDD configurations. For NVR-adjacent storage or distributed surveillance data tiers, eight bays provide enough raw capacity headroom to avoid immediate storage augmentation at deployment.
• 1U Rack Form Factor: At 1U, the DL365 Gen10+ fits standard 19-inch rack enclosures and keeps rack unit consumption low — relevant when deploying multiple nodes in a shared rack with switches, patch panels, and UPS units.
• 55.97 lb Shipping Weight: Plan rack loading accordingly — 55.97 lb is toward the upper end for a 1U platform. Verify rail kit load ratings and rack total weight capacity before deployment, particularly in mid-tower or wall-mount enclosures.

Integration and Compatibility

The DL365 Gen10+ platform is designed for integration with HPE's management ecosystem, including iLO (Integrated Lights-Out) remote management, HPE OneView, and standard IPMI-compatible tools. As a general-purpose HPE server platform, it supports a broad range of operating systems and hypervisors. For surveillance and physical security deployments, it can serve as a dedicated VMS host or a backend analytics server. Confirm specific VMS vendor hardware compatibility lists prior to procurement for production deployments.

Frequently Asked Questions

Q: What processor does the HPE P39366-291 include?

A: The P39366-291 ships with a single AMD EPYC 7262 processor — an 8-core, 16-thread CPU running at 3.2 GHz base clock.

Q: How much memory does the P39366-291 come with from the factory?

A: It ships with 32GB of DDR4 in a 1P (single-processor) configuration. The DL365 Gen10+ platform supports additional DIMM expansion beyond the base 32GB.

Q: How many drive bays does the P39366-291 have?

A: Eight small form factor (SFF) drive bays. These support SAS and SATA drives in SSD and HDD form factors depending on the backplane configuration.

Q: What rack space does the P39366-291 require?

A: It is a 1U rack server, requiring a single rack unit in a standard 19-inch rack enclosure.

Q: What is the shipping weight of the P39366-291?

A: 55.97 lb. Factor this into rack load planning, especially for high-density deployments.

Eden Phillips

The P39366-291 is a practical entry point into the HPE DL365 Gen10+ line — a 1U platform shipping at 55.97 lb that reflects a fully configured, production-ready chassis rather than a barebones shell. The AMD EPYC 7262 in a single-socket config is a deliberate trade-off: you get 8 cores and 16 threads at a price point well below dual-socket or higher-core-count EPYC configurations, which makes sense when the workload doesn't need 32+ cores but does need EPYC's memory channel architecture.

Technical Highlights:

• 1P / Single Socket: Single-processor configuration keeps acquisition cost lower than dual-socket HPE platforms while still delivering EPYC memory bandwidth — the right balance for VMS hosts running 16–32 camera streams or edge analytics nodes that don't need massive parallelism.
• 8x SFF Bays: Eight small form factor bays give meaningful local storage expansion room. For a surveillance backend handling 30-day retention on a mid-size camera count, this can accommodate a usable raw capacity tier without external JBODs.
• 32GB DDR4 Base: 32GB is functional for a hypervisor with a handful of VMs or a dedicated VMS instance, but plan to expand before deploying memory-hungry analytics workloads — EPYC platforms reward higher memory population for bandwidth-sensitive tasks.

Deployment Considerations:

• At 55.97 lb, verify your rack rail kit and total rack weight budget before sliding this into a shared rack — this is not a lightweight 1U and dense configurations can push rack limits.
• The P39366-291 ships with a base 32GB memory configuration; if your VMS or analytics stack has higher RAM requirements, budget for additional DIMMs at procurement time rather than after deployment.

This platform fits a dedicated on-premises VMS server or edge compute node in a mid-size physical security deployment — where single-socket EPYC performance is sufficient and rack density is a priority over maximum core count.