HPE DL360 GEN11 2SFF TM CBL KIT - P48910-B21

HPE P48910-B21 DL360 Gen11 2SFF Tri-Mode Cable Kit

Overview

The HPE P48910-B21 is a drive cable kit designed for the HPE ProLiant DL360 Gen11 server in 2SFF (Small Form Factor) drive configurations. If you're wiring up a DL360 Gen11 with a 2SFF backplane and need the correct factory-spec cable to connect storage to the system board or HBA, this kit provides the exact harness HPE ships with configured systems — eliminating guesswork around connector compatibility and cable routing in the dense 1U chassis. At 0.70 lb and 12.70 x 9.20 x 1.40 in, the kit is sized for the DL360 Gen11's internal cable management architecture.

Compatibility

Specifically matched to the HPE ProLiant DL360 Gen11 platform with 2SFF drive bay configuration. This is not a universal cable — it is a model-specific assembly. Before ordering, confirm your DL360 Gen11 is configured for 2SFF (not 4LFF or 8SFF) and that your storage controller or backplane requires this cable path. Using the wrong cable assembly in a 1U server can result in improper seating, airflow obstruction, or failed storage detection. If you are building out or expanding server storage in a DL360 Gen11 rack deployment, verify the backplane part number against HPE's QuickSpecs for P48910-B21 compatibility before installation.

Installation Notes

Route cables per HPE's DL360 Gen11 maintenance guide — cable management arms and clip points inside the 1U chassis are specific to this assembly. Improper routing can interfere with airflow across the drive cage and system board. No tools beyond standard HPE server access (Torx T-15 for panel removal) are typically required for cable installation, though confirm against your specific chassis revision.