HPE P86417-B21 C5 Power Cord
Overview
The HPE P86417-B21 is a C5 power cord rated for 250V and 2.5A current, 1.8 meters in length with black jacket. This is a standard replacement power cable for HPE enterprise servers, network switches, and power distribution equipment. Use this when your original cord is damaged, lost, or when you need an extra cable to avoid unplugging and re-patching during maintenance or upgrades.
Compatibility
The C5 connector (also called a "cloverleaf" or "mickey mouse" connector) is a three-contact inlet found on many HPE ProLiant servers, power supplies, PDUs, and network infrastructure devices. Verify your equipment's inlet type before ordering — C5 is distinct from C13 (common on monitors and smaller devices) and C19 (high-current server racks). This cord works with any HPE device or third-party equipment featuring a standard C5 female inlet.
Installation Notes
The 1.8-meter (approximately 5.9-foot) length is typical for server-to-wall-outlet runs in standard 19-inch rack deployments or direct floor-mounted equipment connections. Ensure the outlet or PDU circuit supports 250V AC operation and the connected device does not exceed 2.5A on this phase — exceeding rated current will trip thermal protection or damage the cord. Route cables away from high-traffic areas to avoid crushing or tripping hazards. Do not bend the connector at sharp angles or coil tightly near the plug ends.
