HPE C5 250V 2.5AMP Black 1.83M AR Power Cord - P86422-B21

HPE P86422-B21 C5 Power Cord

Overview

The HPE P86422-B21 is a 1.83-meter (6 ft) IEC 60320 C5 power cord rated for 250V at 2.5 amperes. This is a replacement or spare cord for HPE networking equipment, servers, and power distribution units that use the C5 connector. The 1.83m length provides adequate reach between wall outlets and equipment racks without excessive cable run or voltage drop, and the 2.5A rating handles moderate-draw devices without oversizing the conductor gauge.

Compatibility

The IEC 60320 C5 connector (also called a "cloverleaf" or "Mickey Mouse" plug) is the standard inlet on HPE network switches, managed PDUs, uninterruptible power supplies (UPS), and compact servers. Verify your device inlet matches the C5 socket before ordering—mismatched connectors cannot be forced. This cord is compatible with HPE enterprise-class network and power management equipment across rack and tower form factors.

Installation Notes

Install the C5 connector by aligning the three contact blades and inserting straight into the device inlet until it seats fully—rotational orientation matters, so confirm proper polarity before applying power. Route the cord away from sharp edges, hot surfaces, and pinch points in the rack. The 1.83m length is suited for rack-mounted equipment positioned within 6 feet of a nearby outlet; longer runs (10+ feet) may require a heavier-gauge extension cord to avoid voltage sag. Verify the outlet voltage matches 250V before first use. Store unused cords in a dry, temperature-controlled environment; avoid coiling tightly or exposing to direct sunlight, which can degrade insulation over time.

What's in the Box

• 1x HPE P86422-B21 C5 power cord (1.83m, black)