HPE P86425-B21 Standard Power Cord
The HPE P86425-B21 is a 250V AC power cord rated for HPE server installations, 6 feet in length with an IEC 60320 C5 connector. This is the standard replacement or secondary cord for HPE proliant and similar server platforms where Denmark-localized power distribution is required.
Overview
The P86425-B21 delivers AC power via a socketed IEC 60320 C5 inlet — commonly called a "mickey mouse" or "trefoil" connector due to its three round pin configuration. The 250V AC rating supports European and international markets where mains voltage runs higher than North American 110V systems. Six feet of length provides moderate reach from wall outlet to server rear panel or PDU input without requiring an extension. Black jacket is standard for most server environments.
Compatibility
Compatible with HPE proliant server series and other OEM equipment fitted with IEC 60320 C5 female inlets. The 250V AC rating is mandatory for deployment in European electrical grids and regions where standard mains voltage is 220–240V. Do not use this cord in 110V-only environments — verify your facility mains voltage before installation. The Denmark localization indicates compliance with Danish electrical code (DS/EN standards), though the cord operates identically to equivalent IEC 60320 C5 cords in any country using 250V AC power distribution.
Installation Notes
Ensure the server's power inlet is rated for 250V AC before connecting. Verify the inlet connector type matches IEC 60320 C5 (three round pins arranged in a triangular pattern). Route cord away from high-traffic areas to prevent trip hazards. Do not bend sharply or kink the cord during storage or installation — excessive bending weakens the conductor insulation. If the cord shows physical damage (cracking, exposed wires, burn marks), discard it immediately and install a replacement.
