HPE C5 250V 2.5AMP Black 1.8M Eu/ru/kr Power Cord - P86416-B21

HPE P86416-B21 C5 Power Cord

Overview

The P86416-B21 is a 1.8-meter power cord rated for 250V at 2.5 amps with an IEC C5 (Mickey Mouse) connector — the standard three-prong inlet found on mid-range enterprise servers, network gear, and power distribution units across European, Russian, and Korean markets. If you're decommissioning or replacing hardware in those regions and need a direct replacement cord without regional adapter complexity, this is the specification to match.

Compatibility

IEC C5 connectors are common on HPE ProLiant servers (Gen9 and newer in select configurations), managed network switches, and UPS devices. Verify the inlet type on your device before ordering — C5 has three round pins in a triangular pattern and is distinct from C13 (standard desktop/monitor cords) and C7 (two-pin figure-eight). The 250V/2.5A rating handles typical enterprise power draw; do not use for devices rated above 2.5A at 250V.

Installation Notes

The 1.8-meter length is sufficient for most rack-mount and floor-standing equipment positioned within 6 feet of a wall outlet. Ensure the receptacle matches IEC C5 — partial insertion into a C13 socket can damage the connector and create fire hazard. Route the cord away from sharp edges and high-traffic areas. The black jacket suits standard server-room aesthetics and helps with cable identification.

What's in the Box

• 1x HPE C5 power cord, 1.8m, black