HPE 868705R-B21#B19 DL380 GEN10 12LFF Reman Srv:eu-multi

HPE 868705R-B21#B19 ProLiant DL380 Gen10 12LFF Remanufactured Server

The HPE 868705R-B21#B19 is a remanufactured ProLiant DL380 Gen10 configured for 12 Large Form Factor (LFF) drive bays, localized for EU multi-language deployments (CTO suffix #B19). The 868705R prefix identifies this as an HPE factory-remanufactured unit — returned to HPE specification — as distinct from a new-build DL380 Gen10 (867961-B21 series). If you are sourcing within the HPE server line, confirm the suffix: B21 is the worldwide SKU base; #B19 designates EU localization, which affects included documentation, power cord, and regulatory markings.

Drive Bay Configuration

The 12 LFF bay configuration targets storage-dense workloads: on-premises surveillance recording, backup repositories, or object storage nodes where you need large-capacity SAS/SATA spinning disks or LFF SSDs. If your workload is compute-bound with minimal local storage, a Small Form Factor (SFF) variant will serve better — the LFF chassis trades drive density (capacity per bay) for bay count compared to SFF configurations.

Memory Compatibility

HPE's compatibility reference for this platform lists DDR4-2933Y Smart Kits from 8GB single-rank to 128GB quad-rank LRDIMM. Matched-pair population is required for optimal memory bandwidth — consult HPE's QuickSpecs for this platform before ordering DIMMs to confirm channel population rules and maximum installed capacity for your specific processor configuration.

• 8GB 1Rx8 RDIMM: P00918-B21 — entry-level, single-rank, suited for light workloads or test environments.
• 16GB options: P00920-B21 (1Rx4) or P00922-B21 (2Rx8) — mid-tier; choose 1Rx4 for latency-sensitive workloads, 2Rx8 for cost efficiency.
• 32GB 2Rx4 RDIMM: P00924-B21 — the density sweet spot for most virtualized deployments balancing cost and capacity.
• 64GB options: P00930-B21 (2Rx4 RDIMM) or P00926-B21 (4Rx4 LRDIMM) — high-density; LRDIMM reduces memory bus load at the cost of slightly higher latency.
• 128GB 4Rx4 LRDIMM: P11040-B21 — maximum per-DIMM capacity for in-memory database or large VM footprint scenarios.

Remanufactured vs. New

Remanufactured HPE units (868705R- prefix) are refurbished to HPE's own standard and are an established procurement path for budget-constrained infrastructure refreshes. Verify the included warranty terms at time of purchase — remanufactured units may carry a different coverage period than new-build equivalents. For rack server deployments requiring a manufacturer warranty equivalent to new, confirm this before ordering.

Frequently Asked Questions

Q: What does the #B19 suffix on 868705R-B21#B19 mean?

A: The #B19 suffix is HPE's CTO (Configure To Order) localization code for EU multi-language. It affects documentation language, regulatory compliance markings, and the included power cord. The base SKU is 868705R-B21 (worldwide remanufactured DL380 Gen10 12LFF).

Q: What is the difference between 868705R-B21 and 867961-B21?

A: The 868705R- prefix designates a factory-remanufactured unit. The 867961- prefix is the new-build ProLiant DL380 Gen10 equivalent. Functionally the platform is the same; the remanufactured variant is typically sourced at lower cost but may carry different warranty terms.

Q: What memory is compatible with the 868705R-B21#B19?

A: HPE lists DDR4-2933Y Smart Kit DIMMs from 8GB (P00918-B21) up to 128GB (P11040-B21) for this platform. Always verify channel population rules and maximum supported capacity against HPE QuickSpecs for your specific processor SKU before purchasing memory.

Q: Is this a 2U rack server?

A: The HPE ProLiant DL380 Gen10 is a 2U rack-mount server. The 12LFF designation refers to the drive bay configuration (12 Large Form Factor bays), not a change in rack unit height.

Q: Can this server be used for IP video surveillance recording?

A: Yes. The 12 LFF drive bay configuration is well-suited for high-capacity storage workloads including NVR-class IP video recording. Pair it with large-capacity surveillance-grade HDDs and a compatible VMS platform for extended retention deployments.

Ted Perry

The 868705R-B21#B19 is the remanufactured variant of the ProLiant DL380 Gen10 in 12LFF configuration — a meaningful distinction when you're sourcing against a capital budget. The 868705R- prefix tells you this unit went back through HPE's own refurbishment process, not a third-party refurb house. That matters for long-term supportability and firmware update eligibility, though you should confirm iLO and SPP (Service Pack for ProLiant) support status before committing to a production deployment.

Technical Highlights:

• 12 LFF Drive Bays: Maximizes per-bay capacity for spinning disk — the right configuration when you're targeting 8TB–20TB SATA drives for surveillance retention or backup rather than NVMe performance tiers.
• DDR4-2933Y Memory Support: Supports matched Smart Kit DIMMs from 8GB (P00918-B21) to 128GB LRDIMM (P11040-B21) per slot — enough headroom for virtualized recording servers running multiple concurrent VMS instances.
• EU Multi-Language (#B19): The localization suffix is not cosmetic — it drives regulatory labeling and power infrastructure compatibility. Deploying this in a North American rack without verifying the power cord and voltage spec against your PDU is a commissioning mistake worth avoiding.

Deployment Considerations:

• Confirm iLO Advanced license status on remanufactured units before deployment — remote management features may require a separate license purchase depending on what was included in the original build.
• The #B19 EU localization means this SKU is not the default choice for US-based deployments; if you're sourcing for a domestic US data center or surveillance head-end, verify the power supply spec and regulatory markings match your environment before ordering.

Best fit: a storage-dense on-premises deployment — physical security head-end, enterprise NVR backend, or backup target node — where LFF drive bay count drives the architecture and budget constraints make the remanufactured procurement path viable.