HPE 867958R-B21#B19 DL360 G10 4LFF Reman Srv:eu-multi

HPE 867958R-B21#B19 ProLiant DL360 Gen10 4LFF Remanufactured Server

Overview

The HPE 867958R-B21#B19 is a remanufactured ProLiant DL360 Gen10 configured in a 4-Large Form Factor (4LFF) drive bay chassis for the EU-multi region. As a remanufactured unit, it delivers the compute density of HPE's Gen10 1U rack platform at a reduced acquisition cost — a practical path for expanding rack server capacity in surveillance back-end infrastructure, VMS recording nodes, or edge compute deployments where budget constraints matter but platform reliability cannot be compromised.

The 867958R-B21#B19 (often searched as 867958R B21#B19) ships as part of HPE's remanufactured server program and is confirmed compatible with HPE's DDR4-2933 Smart Memory kit lineup — giving integrators a documented upgrade path without guesswork on memory interoperability.

Key Features

• 4LFF Drive Bay Configuration: Four large-form-factor bays accommodate 3.5-inch drives, making this chassis the right pick when raw storage capacity per node matters more than drive density — relevant for NVR back-end builds storing high-bitrate video from multi-camera deployments.
• Documented DDR4-2933 Memory Compatibility: HPE's published memory kit matrix confirms support for Smart Memory modules from 8GB (P00918-B21) through 128GB (P11040-B21) per DIMM, across 1Rx8, 1Rx4, 2Rx8, 2Rx4, and 4Rx4 configurations — so you can right-size memory for the workload without compatibility risk. A fully populated configuration using 128GB LRDIMMs (P11040-B21) enables high-capacity VMS database and analytics workloads on a single 1U node.
• EU-Multi Region Configuration: The #B19 option code designates EU-multi localization — power supply, regulatory markings, and documentation are appropriate for European deployments. Confirm this matches your target country's certification requirements before ordering.
• Remanufactured Platform Value: Factory-remanufactured to HPE standards, this unit provides a cost-effective entry point into the HPE ProLiant Gen10 server line without sourcing grey-market or parallel-import hardware.

Integration and Compatibility

The DL360 Gen10 platform integrates with HPE iLO management, HPE OneView, and standard IPMI-based data center management tooling. For network video recorder and VMS deployments, confirm that your chosen VMS vendor (Milestone, Genetec, Axis Camera Station, etc.) publishes a server hardware compatibility list entry for the DL360 Gen10 platform — most major VMS vendors do. Memory upgrades should use HPE Smart Memory kits from the confirmed compatibility list above to avoid POST errors or performance degradation.

Frequently Asked Questions

Q: What memory modules are compatible with the HPE 867958R-B21#B19?

A: HPE's published matrix confirms compatibility with DDR4-2933 Smart Memory kits ranging from 8GB 1Rx8 (P00918-B21) to 128GB 4Rx4 LRDIMM (P11040-B21). Use HPE Smart Memory kits to avoid compatibility issues.

Q: What does the 4LFF designation mean for this server?

A: 4LFF means four Large Form Factor (3.5-inch) drive bays. This configuration prioritizes storage capacity per bay over drive count, making it suited for video recording workloads that require high-capacity spinning or SSD media.

Q: What region is the 867958R-B21#B19 configured for?

A: The #B19 option code designates EU-multi region configuration, covering European power and regulatory requirements. Verify this matches your specific country's certification needs before ordering.

Q: Is this a new or remanufactured unit?

A: This is a remanufactured unit from HPE's remanufactured server program, offering a lower acquisition cost than a new equivalent while maintaining HPE platform standards.

Q: Can this server be used as a VMS recording server?

A: The DL360 Gen10 platform is widely used as a VMS back-end server. Verify your VMS vendor's hardware compatibility list for the DL360 Gen10 and confirm drive and memory configuration against your channel count and retention requirements.

Eden Phillips

When evaluating the 867958R-B21#B19 for a surveillance back-end role, the memory compatibility matrix is one of the most practical starting points: HPE's published kit list confirms DDR4-2933 support from 8GB up to 128GB per DIMM slot across five distinct DIMM configurations — that range covers everything from a lightweight edge recorder to a high-channel-count central VMS node without needing a separate platform.

Technical Highlights:

• DDR4-2933 Smart Memory Range: Confirmed kits from 8GB (P00918-B21) through 128GB LRDIMM (P11040-B21) give integrators a documented upgrade path — no guessing whether a third-party module will POST cleanly on this platform.
• 4LFF Drive Bay Layout: Four 3.5-inch bays are the right trade-off when you need fewer, higher-capacity drives — typical for 24/7 multi-camera recording where a small number of high-capacity SATA or SAS drives is preferable to managing a larger SSD pool.
• Remanufactured Cost Position: Lower acquisition cost than a new Gen10 unit while staying on a mainstream, well-supported platform with broad VMS vendor compatibility — the remanufactured designation is the key differentiator from a new-build BTO configuration.

Deployment Considerations:

• The #B19 EU-multi option code means this unit is configured for European regulatory and power standards — deploying it outside the intended region without confirming PSU compatibility and certification coverage is a risk worth checking before racking it.
• Available source evidence covers only the memory kit compatibility matrix; processor, storage controller, NIC, and power supply specifications are not documented here — request the full configuration sheet before finalizing a channel-count or storage-retention design.

Best fit: a European integrator expanding a surveillance recording back-end who needs a cost-effective 1U node with documented memory upgrade options and doesn't require a new-unit warranty position.