Honeywell

Honeywell

SKU: 5800MICRA

Honeywell Recessed Wireless Door/Window Contact - 5800MICRA

• Recessed form factor conceals hardware inside frames, eliminating visible sensor hardware.
• Wireless 5800-series protocol integrates with compatible Honeywell wireless control panels.
• Hidden install reduces tampering risk versus surface-mounted contacts in high-visibility areas.

Honeywell

SKU: 4232CBM

Honeywell VISTA Automation Module - 4232CBM

• Dual serial interfaces—RS232 to 50 ft and RS422 to 1,000 ft—cover most integration runs.
• ECP bus-powered at 8–12V (50mA nominal) eliminates the need for a separate power supply.
• Tape-mounts inside the panel cabinet with no drilling, preserving cabinet integrity.

Honeywell

SKU: PROA7C

Honeywell ProSeries All-in-One Panel with Camera - PROA7C

• Integrated camera module eliminates a separate device, reducing rack space and cabling.
• Desktop or wall-mount form factor (7.875"×5.75"×1.0") fits lobbies or utility closets.
• 7500mAh battery backup sustains alarm and charging on 110V AC unswitched power.

Honeywell

SKU: 5881ENHC

Honeywell Unlimited-Zone Commercial Receiver - 5881ENHC

• Supports unlimited 5800-series wireless zones via 345 MHz RF with full supervision.
• Connects to VISTA-15P through 250BPT over 4-wire keypad data bus; no extra PSU needed.
• Operates 0°C–50°C, suits retrofits and leased spaces where running wire is impractical.

Honeywell

SKU: 5828

Honeywell Wireless Keypad - 5828

• Wireless PIN/credential entry eliminates conduit runs to remote arming points.
• Ideal for retrofits and mobile duty stations where hardwired keypads aren't feasible.
• Verify panel firmware compatibility before deployment; wireless protocol support varies.

Honeywell

SKU: 5821PB-KT1

Honeywell Wireless Combo Temperature/Flood Kit - 5821PB-KT1

• Combines temperature and flood detection in a single wireless sensor kit.
• Battery-powered and wireless—no cable runs required for environmental monitoring.
• Integrates with Honeywell wireless control panels supporting accessory expansion.

Honeywell

SKU: 5821

Honeywell Wireless Transmitter for Temp/Flood - 5821

• Monitors both temperature and flood conditions from a single wireless transmitter.
• Uses Honeywell proprietary wireless protocol for native integration with compatible panels.
• Suits server closets, basements, and HVAC drain areas where environmental risk is high.

Honeywell

SKU: 5800COA

Honeywell Wireless CO Detector - Canada - 5800COA

• Integrates with VISTA-series panels via 5881 RF receiver—no hardwired sensor runs needed.
• Reports alarm, trouble, tamper, EOL, and low-battery states to the control panel wirelessly.
• CSA 6.19-01 listed with supervised fault detection for residential and commercial deployment.

Honeywell

SKU: WAVE2

Honeywell WAVE2 Two-Tone Indoor Alarm Siren

106 dB two-tone indoor siren for hardwired alarm systems

• 106 dB two-tone output cuts through ambient noise on warehouses and multi-floor sites.
• Hinged snap-open case enables terminal wiring access without unmounting the unit.
• 6–12 VDC input at 500 mA max integrates directly with standard 12 VDC panel aux outputs.

Honeywell

SKU: VISTA-50P

Honeywell VISTA-50P Wired Intrusion Control Panel

Hardwired intrusion panel for multi-tenant buildings without RF interference

• Wired zone architecture eliminates RF interference in electromagnetically congested facilities.
• Onboard 16.5VAC 40VA transformer powers sensors and keypads without external conditioning modules.
• Engineered for mid-size commercial and multi-tenant deployments requiring independent zone monitoring.

Honeywell

SKU: VISTA-250BPT

Honeywell VISTA-250BPT 250-Zone Commercial Intrusion Panel

250-zone wired intrusion panel for large commercial multi-tenant buildings

• Supports up to 250 wired zones for high-density commercial and multi-tenant deployments.
• Wired-only architecture eliminates RF interference in concrete-heavy urban structures.
• Onboard 16.5VAC 40VA supply powers zone loops, keypads, and auxiliary devices.

Honeywell

SKU: VISTA-21IP

Honeywell VISTA-21IP Wired Intrusion Control Panel

Hardwired intrusion panel eliminates RF interference for predictable alarm response

• Hardwired design eliminates RF dead zones and delivers deterministic alarm signal latency.
• 16.5VAC 40VA onboard power runs panel, sensors, sirens, and keypads without added distribution.
• Intrusion-specific architecture suits commercial sites with existing low-voltage structured cabling.

Honeywell

SKU: VISTA-20PSIA

Honeywell VISTA-20PSIA Wired Intrusion Control Panel

Hardwired intrusion panel with integrated 40VA transformer for residential and light commercial

• Hardwired topology eliminates RF interference and dead zones in metal-structure sites.
• Integrated 16.5VAC 40VA transformer powers door strikes, relays, and perimeter devices.
• Smoke detection integration consolidates intrusion and life-safety zones on one panel.

Honeywell

SKU: VISTA-20P

Honeywell VISTA-20P Wired Intrusion Control Panel

Hardwired intrusion panel for retail, warehouse, and residential perimeter protection

• All-wired topology eliminates RF dropout in electrically noisy warehouses and floors.
• 16.5VAC 40VA transformer powers sensors, keypads, and auxiliary devices in one panel.
• Zone-based alarm logic integrates into established Honeywell platforms, reducing installer overhead.

Honeywell

SKU: VISTA-15P

Honeywell VISTA-15P Wired Intrusion Control Panel

Hardwired intrusion panel with multi-zone support and 16.5VAC transformer

• Hardwired architecture eliminates RF interference and wireless dropouts in metal-frame buildings.
• Integrated 16.5VAC 40VA transformer powers the panel plus sirens, strobes, and relay modules.
• Supports smoke and fire detection analytics alongside intrusion zones in a single control panel.

Honeywell

SKU: PROSIXSIREN

Honeywell PROSIXSIREN ProSeries SiX Outdoor Wireless Siren

Wireless outdoor siren with 85 dB sound and dual-color strobe

• 85 dB output with dual-color LED strobe distinguishes intrusion from fire/CO events.
• SiX two-way 128-bit AES encrypted link with supervision over 300+ ft open-air range.
• Battery-powered (4 AA lithium included) enables wall or ceiling mount without wiring.

Honeywell

SKU: PROSIXMINI

Honeywell PROSIXMINI 2D Barcode Scanner

Compact 2D barcode scanner for QR, Data Matrix, and linear codes

• 2D scan engine reads QR, Data Matrix, PDF417, and linear barcodes in one pass.
• Wired connectivity eliminates RF interference, pairing overhead, and battery drain.
• Compact 0.45"H × 1.25"W × 2.44"L body reduces hand fatigue on extended picking shifts.

Honeywell

SKU: PROSIXMED

Honeywell PROSIXMED Wearable Pendant Scanner

Hands-free wearable pendant scanner for mobile healthcare and logistics

• 2D scan engine decodes 1D, QR, Data Matrix, and PDF417 without reconfiguration.
• Wired connectivity eliminates wireless latency and dead zones in RF-dense environments.
• Compact 38×38×13 mm housing operates across 0°–50°C for full-shift wearable deployment.

Honeywell

SKU: PROSIXGB

Honeywell PROSIXGB 2D Handheld Wired Barcode Scanner

Wired 2D barcode scanner for high-volume warehouse and logistics scanning

• 2D imaging engine reads linear and 2D symbologies—no hardware swap when changing formats.
• Wired connection eliminates RF dropout and battery charging cycles during high-throughput shifts.
• 128-bit AES encryption supports data security compliance in healthcare and pharma logistics.

Honeywell

SKU: PROSIXFOB

Honeywell PROSIXFOB ProSeries SiX Two-Button Panic Keyfob

Compact 2D barcode scanner with wired connection for retail and warehouse

• ProSeries SiX two-button wireless panic keyfob
• Compact keychain remote for panic activation
• User-replaceable lithium battery for years of use